From: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com> Cc: Support Opensource <support.opensource@diasemi.com>, <alsa-devel@alsa-project.org>, <linux-kernel@vger.kernel.org> Subject: [PATCH] ASoC: da7213: Update driver to use device_property* FW functions Date: Fri, 19 May 2017 15:32:25 +0100 [thread overview] Message-ID: <20170519143225.089823FBCD@swsrvapps-01.diasemi.com> (raw) The driver now supports ACPI based initialisation as well as DT and old pdata methods. However the FW data handling still uses DT specific calls to read firmware data (of_property*) so for ACPI based initialisation the FW data will only be set to default values. This patch updates the FW handling to use device_property* calls instead so that both ACPI and DT are handled as expected. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> --- sound/soc/codecs/da7213.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index 024d83f..c3e1189 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -13,6 +13,8 @@ */ #include <linux/acpi.h> +#include <linux/of_device.h> +#include <linux/property.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/i2c.h> @@ -1606,12 +1608,12 @@ static int da7213_set_bias_level(struct snd_soc_codec *codec, } static struct da7213_platform_data - *da7213_of_to_pdata(struct snd_soc_codec *codec) + *da7213_fw_to_pdata(struct snd_soc_codec *codec) { - struct device_node *np = codec->dev->of_node; + struct device *dev = codec->dev; struct da7213_platform_data *pdata; - const char *of_str; - u32 of_val32; + const char *fw_str; + u32 fw_val32; pdata = devm_kzalloc(codec->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { @@ -1619,29 +1621,29 @@ static int da7213_set_bias_level(struct snd_soc_codec *codec, return NULL; } - if (of_property_read_u32(np, "dlg,micbias1-lvl", &of_val32) >= 0) - pdata->micbias1_lvl = da7213_of_micbias_lvl(codec, of_val32); + if (device_property_read_u32(dev, "dlg,micbias1-lvl", &fw_val32) >= 0) + pdata->micbias1_lvl = da7213_of_micbias_lvl(codec, fw_val32); else pdata->micbias1_lvl = DA7213_MICBIAS_2_2V; - if (of_property_read_u32(np, "dlg,micbias2-lvl", &of_val32) >= 0) - pdata->micbias2_lvl = da7213_of_micbias_lvl(codec, of_val32); + if (device_property_read_u32(dev, "dlg,micbias2-lvl", &fw_val32) >= 0) + pdata->micbias2_lvl = da7213_of_micbias_lvl(codec, fw_val32); else pdata->micbias2_lvl = DA7213_MICBIAS_2_2V; - if (!of_property_read_string(np, "dlg,dmic-data-sel", &of_str)) - pdata->dmic_data_sel = da7213_of_dmic_data_sel(codec, of_str); + if (!device_property_read_string(dev, "dlg,dmic-data-sel", &fw_str)) + pdata->dmic_data_sel = da7213_of_dmic_data_sel(codec, fw_str); else pdata->dmic_data_sel = DA7213_DMIC_DATA_LRISE_RFALL; - if (!of_property_read_string(np, "dlg,dmic-samplephase", &of_str)) + if (!device_property_read_string(dev, "dlg,dmic-samplephase", &fw_str)) pdata->dmic_samplephase = - da7213_of_dmic_samplephase(codec, of_str); + da7213_of_dmic_samplephase(codec, fw_str); else pdata->dmic_samplephase = DA7213_DMIC_SAMPLE_ON_CLKEDGE; - if (of_property_read_u32(np, "dlg,dmic-clkrate", &of_val32) >= 0) - pdata->dmic_clk_rate = da7213_of_dmic_clkrate(codec, of_val32); + if (device_property_read_u32(dev, "dlg,dmic-clkrate", &fw_val32) >= 0) + pdata->dmic_clk_rate = da7213_of_dmic_clkrate(codec, fw_val32); else pdata->dmic_clk_rate = DA7213_DMIC_CLK_3_0MHZ; @@ -1713,10 +1715,9 @@ static int da7213_probe(struct snd_soc_codec *codec) DA7213_LINE_AMP_OE, DA7213_LINE_AMP_OE); /* Handle DT/Platform data */ - if (codec->dev->of_node) - da7213->pdata = da7213_of_to_pdata(codec); - else - da7213->pdata = dev_get_platdata(codec->dev); + da7213->pdata = dev_get_platdata(codec->dev); + if (!da7213->pdata) + da7213->pdata = da7213_fw_to_pdata(codec); /* Set platform data values */ if (da7213->pdata) { -- 1.9.1
WARNING: multiple messages have this Message-ID (diff)
From: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> To: Mark Brown <broonie@kernel.org>, Liam Girdwood <lgirdwood@gmail.com>, Jaroslav Kysela <perex@perex.cz>, Takashi Iwai <tiwai@suse.com> Cc: alsa-devel@alsa-project.org, Support Opensource <support.opensource@diasemi.com>, linux-kernel@vger.kernel.org Subject: [PATCH] ASoC: da7213: Update driver to use device_property* FW functions Date: Fri, 19 May 2017 15:32:25 +0100 [thread overview] Message-ID: <20170519143225.089823FBCD@swsrvapps-01.diasemi.com> (raw) The driver now supports ACPI based initialisation as well as DT and old pdata methods. However the FW data handling still uses DT specific calls to read firmware data (of_property*) so for ACPI based initialisation the FW data will only be set to default values. This patch updates the FW handling to use device_property* calls instead so that both ACPI and DT are handled as expected. Signed-off-by: Adam Thomson <Adam.Thomson.Opensource@diasemi.com> --- sound/soc/codecs/da7213.c | 37 +++++++++++++++++++------------------ 1 file changed, 19 insertions(+), 18 deletions(-) diff --git a/sound/soc/codecs/da7213.c b/sound/soc/codecs/da7213.c index 024d83f..c3e1189 100644 --- a/sound/soc/codecs/da7213.c +++ b/sound/soc/codecs/da7213.c @@ -13,6 +13,8 @@ */ #include <linux/acpi.h> +#include <linux/of_device.h> +#include <linux/property.h> #include <linux/clk.h> #include <linux/delay.h> #include <linux/i2c.h> @@ -1606,12 +1608,12 @@ static int da7213_set_bias_level(struct snd_soc_codec *codec, } static struct da7213_platform_data - *da7213_of_to_pdata(struct snd_soc_codec *codec) + *da7213_fw_to_pdata(struct snd_soc_codec *codec) { - struct device_node *np = codec->dev->of_node; + struct device *dev = codec->dev; struct da7213_platform_data *pdata; - const char *of_str; - u32 of_val32; + const char *fw_str; + u32 fw_val32; pdata = devm_kzalloc(codec->dev, sizeof(*pdata), GFP_KERNEL); if (!pdata) { @@ -1619,29 +1621,29 @@ static int da7213_set_bias_level(struct snd_soc_codec *codec, return NULL; } - if (of_property_read_u32(np, "dlg,micbias1-lvl", &of_val32) >= 0) - pdata->micbias1_lvl = da7213_of_micbias_lvl(codec, of_val32); + if (device_property_read_u32(dev, "dlg,micbias1-lvl", &fw_val32) >= 0) + pdata->micbias1_lvl = da7213_of_micbias_lvl(codec, fw_val32); else pdata->micbias1_lvl = DA7213_MICBIAS_2_2V; - if (of_property_read_u32(np, "dlg,micbias2-lvl", &of_val32) >= 0) - pdata->micbias2_lvl = da7213_of_micbias_lvl(codec, of_val32); + if (device_property_read_u32(dev, "dlg,micbias2-lvl", &fw_val32) >= 0) + pdata->micbias2_lvl = da7213_of_micbias_lvl(codec, fw_val32); else pdata->micbias2_lvl = DA7213_MICBIAS_2_2V; - if (!of_property_read_string(np, "dlg,dmic-data-sel", &of_str)) - pdata->dmic_data_sel = da7213_of_dmic_data_sel(codec, of_str); + if (!device_property_read_string(dev, "dlg,dmic-data-sel", &fw_str)) + pdata->dmic_data_sel = da7213_of_dmic_data_sel(codec, fw_str); else pdata->dmic_data_sel = DA7213_DMIC_DATA_LRISE_RFALL; - if (!of_property_read_string(np, "dlg,dmic-samplephase", &of_str)) + if (!device_property_read_string(dev, "dlg,dmic-samplephase", &fw_str)) pdata->dmic_samplephase = - da7213_of_dmic_samplephase(codec, of_str); + da7213_of_dmic_samplephase(codec, fw_str); else pdata->dmic_samplephase = DA7213_DMIC_SAMPLE_ON_CLKEDGE; - if (of_property_read_u32(np, "dlg,dmic-clkrate", &of_val32) >= 0) - pdata->dmic_clk_rate = da7213_of_dmic_clkrate(codec, of_val32); + if (device_property_read_u32(dev, "dlg,dmic-clkrate", &fw_val32) >= 0) + pdata->dmic_clk_rate = da7213_of_dmic_clkrate(codec, fw_val32); else pdata->dmic_clk_rate = DA7213_DMIC_CLK_3_0MHZ; @@ -1713,10 +1715,9 @@ static int da7213_probe(struct snd_soc_codec *codec) DA7213_LINE_AMP_OE, DA7213_LINE_AMP_OE); /* Handle DT/Platform data */ - if (codec->dev->of_node) - da7213->pdata = da7213_of_to_pdata(codec); - else - da7213->pdata = dev_get_platdata(codec->dev); + da7213->pdata = dev_get_platdata(codec->dev); + if (!da7213->pdata) + da7213->pdata = da7213_fw_to_pdata(codec); /* Set platform data values */ if (da7213->pdata) { -- 1.9.1
next reply other threads:[~2017-05-19 14:32 UTC|newest] Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-05-19 14:32 Adam Thomson [this message] 2017-05-19 14:32 ` [PATCH] ASoC: da7213: Update driver to use device_property* FW functions Adam Thomson 2017-05-19 17:04 ` Applied "ASoC: da7213: Update driver to use device_property* FW functions" to the asoc tree Mark Brown 2017-05-19 17:04 ` Mark Brown
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170519143225.089823FBCD@swsrvapps-01.diasemi.com \ --to=adam.thomson.opensource@diasemi.com \ --cc=alsa-devel@alsa-project.org \ --cc=broonie@kernel.org \ --cc=lgirdwood@gmail.com \ --cc=linux-kernel@vger.kernel.org \ --cc=perex@perex.cz \ --cc=support.opensource@diasemi.com \ --cc=tiwai@suse.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.