All of lore.kernel.org
 help / color / mirror / Atom feed
From: Joshua Clayton <stillcompiling@gmail.com>
To: Alan Tull <atull@kernel.org>,
	Moritz Fischer <moritz.fischer@ettus.com>,
	Anatolij Gustschin <agust@denx.de>,
	Bastian Stender <bst@pengutronix.de>,
	Shawn Guo <shawnguo@kernel.org>,
	Joshua Clayton <stillcompiling@gmail.com>
Cc: Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Sascha Hauer <kernel@pengutronix.de>,
	Fabio Estevam <fabio.estevam@nxp.com>,
	Russell King <linux@armlinux.org.uk>,
	linux-fpga@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 4/6] ARM: dts: imx6q-evi: support altera-ps-spi
Date: Thu, 25 May 2017 10:29:09 -0700	[thread overview]
Message-ID: <20170525172911.11467-5-stillcompiling@gmail.com> (raw)
In-Reply-To: <20170525172911.11467-1-stillcompiling@gmail.com>

Add support for Altera V FPGA connected to an spi port
to the evi devicetree file

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
 arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 24fe093a66db..a0cbb2d84803 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -82,6 +82,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
 	status = "okay";
+
+	fpga_spi: cyclonespi@0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_fpgaspi>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &ecspi3 {
@@ -313,6 +322,13 @@
 		>;
 	};
 
+	pinctrl_fpgaspi: fpgaspigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+		>;
+	};
+
 	pinctrl_gpminand: gpminandgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: stillcompiling@gmail.com (Joshua Clayton)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v11 4/6] ARM: dts: imx6q-evi: support altera-ps-spi
Date: Thu, 25 May 2017 10:29:09 -0700	[thread overview]
Message-ID: <20170525172911.11467-5-stillcompiling@gmail.com> (raw)
In-Reply-To: <20170525172911.11467-1-stillcompiling@gmail.com>

Add support for Altera V FPGA connected to an spi port
to the evi devicetree file

Signed-off-by: Joshua Clayton <stillcompiling@gmail.com>
---
 arch/arm/boot/dts/imx6q-evi.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm/boot/dts/imx6q-evi.dts b/arch/arm/boot/dts/imx6q-evi.dts
index 24fe093a66db..a0cbb2d84803 100644
--- a/arch/arm/boot/dts/imx6q-evi.dts
+++ b/arch/arm/boot/dts/imx6q-evi.dts
@@ -82,6 +82,15 @@
 	pinctrl-names = "default";
 	pinctrl-0 = <&pinctrl_ecspi1 &pinctrl_ecspi1cs>;
 	status = "okay";
+
+	fpga_spi: cyclonespi at 0 {
+		compatible = "altr,fpga-passive-serial";
+		spi-max-frequency = <20000000>;
+		reg = <0>;
+		pinctrl-0 = <&pinctrl_fpgaspi>;
+		nconfig-gpios = <&gpio4 9 GPIO_ACTIVE_LOW>;
+		nstat-gpios = <&gpio4 11 GPIO_ACTIVE_LOW>;
+	};
 };
 
 &ecspi3 {
@@ -313,6 +322,13 @@
 		>;
 	};
 
+	pinctrl_fpgaspi: fpgaspigrp {
+		fsl,pins = <
+			MX6QDL_PAD_KEY_ROW1__GPIO4_IO09 0x1b0b0
+			MX6QDL_PAD_KEY_ROW2__GPIO4_IO11 0x1b0b0
+		>;
+	};
+
 	pinctrl_gpminand: gpminandgrp {
 		fsl,pins = <
 			MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
-- 
2.11.0

  parent reply	other threads:[~2017-05-25 17:30 UTC|newest]

Thread overview: 70+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-05-25 17:29 [PATCH v11 0/6] FPGA Manager support for altera passive serial Joshua Clayton
2017-05-25 17:29 ` Joshua Clayton
2017-05-25 17:29 ` Joshua Clayton
2017-05-25 17:29 ` [PATCH v11 1/6] fpga: Add flag to indicate SPI bitstream is bit-reversed Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29 ` [PATCH v11 2/6] doc: dt: add altera-ps-spi binding document Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29 ` [PATCH v11 3/6] fpga manager: Add altera-ps-spi driver for Altera FPGAs Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29 ` Joshua Clayton [this message]
2017-05-25 17:29   ` [PATCH v11 4/6] ARM: dts: imx6q-evi: support altera-ps-spi Joshua Clayton
2017-06-02 16:30   ` Andreas Färber
2017-06-02 16:30     ` Andreas Färber
2017-06-02 16:30     ` Andreas Färber
2017-06-02 19:39     ` stillcompiling
2017-06-02 19:39       ` stillcompiling at gmail.com
2017-06-02 19:39       ` stillcompiling-Re5JQEeQqe8AvxtiuMwx3w
2017-06-02 19:54       ` Andreas Färber
2017-06-02 19:54         ` Andreas Färber
2017-06-02 19:54         ` Andreas Färber
2017-06-02 21:10         ` stillcompiling
2017-06-02 21:10           ` stillcompiling at gmail.com
2017-06-02 21:10           ` stillcompiling-Re5JQEeQqe8AvxtiuMwx3w
2017-06-05 15:10           ` Alan Tull
2017-06-05 15:10             ` Alan Tull
2017-06-05 15:10             ` Alan Tull
2017-05-25 17:29 ` [PATCH v11 5/6] lib: add bitrev8x4() Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29 ` [PATCH v11 6/6] fpga-manager: altera-ps-spi: use bitrev8x4 Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-05-25 17:29   ` Joshua Clayton
2017-06-02 15:49 ` [PATCH v11 0/6] FPGA Manager support for altera passive serial Anatolij Gustschin
2017-06-02 15:49   ` Anatolij Gustschin
2017-06-02 15:49   ` Anatolij Gustschin
2017-06-02 20:30 ` [PATCH v12 1/6] fpga: Add flag to indicate SPI bitstream is bit-reversed Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-05 15:11   ` Alan Tull
2017-06-05 15:11     ` Alan Tull
2017-06-05 15:11     ` Alan Tull
2017-06-02 20:30 ` [PATCH v12 2/6] doc: dt: document altera-passive-serial binding Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-05 15:11   ` Alan Tull
2017-06-05 15:11     ` Alan Tull
2017-06-05 15:11     ` Alan Tull
2017-06-02 20:30 ` [PATCH v12 3/6] fpga manager: Add altera-ps-spi driver for Altera FPGAs Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-05 15:11   ` Alan Tull
2017-06-05 15:11     ` Alan Tull
2017-06-05 15:11     ` Alan Tull
2017-06-02 20:30 ` [PATCH v12 4/6] ARM: dts: imx6q-evi: support altera-ps-spi Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-05 15:12   ` Alan Tull
2017-06-05 15:12     ` Alan Tull
2017-06-05 15:12     ` Alan Tull
2017-06-02 20:30 ` [PATCH v12 5/6] lib: add bitrev8x4() Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-05 15:12   ` Alan Tull
2017-06-05 15:12     ` Alan Tull
2017-06-05 15:12     ` Alan Tull
2017-06-02 20:30 ` [PATCH v12 6/6] fpga-manager: altera-ps-spi: use bitrev8x4 Joshua Clayton
2017-06-02 20:30   ` Joshua Clayton
2017-06-05 15:13   ` Alan Tull
2017-06-05 15:13     ` Alan Tull
2017-06-05 15:13     ` Alan Tull

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170525172911.11467-5-stillcompiling@gmail.com \
    --to=stillcompiling@gmail.com \
    --cc=agust@denx.de \
    --cc=atull@kernel.org \
    --cc=bst@pengutronix.de \
    --cc=devicetree@vger.kernel.org \
    --cc=fabio.estevam@nxp.com \
    --cc=kernel@pengutronix.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fpga@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux@armlinux.org.uk \
    --cc=mark.rutland@arm.com \
    --cc=moritz.fischer@ettus.com \
    --cc=robh+dt@kernel.org \
    --cc=shawnguo@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.