From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PULL 5/9] xhci: split into multiple files
Date: Mon, 29 May 2017 15:09:52 +0200 [thread overview]
Message-ID: <20170529130956.20297-6-kraxel@redhat.com> (raw)
In-Reply-To: <20170529130956.20297-1-kraxel@redhat.com>
Moved structs and defines to hcd-xhci.h.
Move nec controller variant to hcd-xhci-nec.c.
No functional changes.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 20170517103313.8459-1-kraxel@redhat.com
---
hw/usb/hcd-xhci.h | 226 +++++++++++++++++++++++++++++++++++++++++++++++
hw/usb/hcd-xhci-nec.c | 63 +++++++++++++
hw/usb/hcd-xhci.c | 238 +-------------------------------------------------
hw/usb/Makefile.objs | 1 +
4 files changed, 292 insertions(+), 236 deletions(-)
create mode 100644 hw/usb/hcd-xhci.h
create mode 100644 hw/usb/hcd-xhci-nec.c
diff --git a/hw/usb/hcd-xhci.h b/hw/usb/hcd-xhci.h
new file mode 100644
index 0000000000..fc36a4c787
--- /dev/null
+++ b/hw/usb/hcd-xhci.h
@@ -0,0 +1,226 @@
+/*
+ * USB xHCI controller emulation
+ *
+ * Copyright (c) 2011 Securiforest
+ * Date: 2011-05-11 ; Author: Hector Martin <hector@marcansoft.com>
+ * Based on usb-ohci.c, emulates Renesas NEC USB 3.0
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#define TYPE_XHCI "base-xhci"
+#define TYPE_NEC_XHCI "nec-usb-xhci"
+#define TYPE_QEMU_XHCI "qemu-xhci"
+
+#define XHCI(obj) \
+ OBJECT_CHECK(XHCIState, (obj), TYPE_XHCI)
+
+#define MAXPORTS_2 15
+#define MAXPORTS_3 15
+
+#define MAXPORTS (MAXPORTS_2 + MAXPORTS_3)
+#define MAXSLOTS 64
+#define MAXINTRS 16
+
+/* Very pessimistic, let's hope it's enough for all cases */
+#define EV_QUEUE (((3 * 24) + 16) * MAXSLOTS)
+
+typedef struct XHCIState XHCIState;
+typedef struct XHCIStreamContext XHCIStreamContext;
+typedef struct XHCIEPContext XHCIEPContext;
+
+enum xhci_flags {
+ XHCI_FLAG_SS_FIRST = 1,
+ XHCI_FLAG_FORCE_PCIE_ENDCAP,
+ XHCI_FLAG_ENABLE_STREAMS,
+};
+
+typedef enum TRBType {
+ TRB_RESERVED = 0,
+ TR_NORMAL,
+ TR_SETUP,
+ TR_DATA,
+ TR_STATUS,
+ TR_ISOCH,
+ TR_LINK,
+ TR_EVDATA,
+ TR_NOOP,
+ CR_ENABLE_SLOT,
+ CR_DISABLE_SLOT,
+ CR_ADDRESS_DEVICE,
+ CR_CONFIGURE_ENDPOINT,
+ CR_EVALUATE_CONTEXT,
+ CR_RESET_ENDPOINT,
+ CR_STOP_ENDPOINT,
+ CR_SET_TR_DEQUEUE,
+ CR_RESET_DEVICE,
+ CR_FORCE_EVENT,
+ CR_NEGOTIATE_BW,
+ CR_SET_LATENCY_TOLERANCE,
+ CR_GET_PORT_BANDWIDTH,
+ CR_FORCE_HEADER,
+ CR_NOOP,
+ ER_TRANSFER = 32,
+ ER_COMMAND_COMPLETE,
+ ER_PORT_STATUS_CHANGE,
+ ER_BANDWIDTH_REQUEST,
+ ER_DOORBELL,
+ ER_HOST_CONTROLLER,
+ ER_DEVICE_NOTIFICATION,
+ ER_MFINDEX_WRAP,
+ /* vendor specific bits */
+ CR_VENDOR_NEC_FIRMWARE_REVISION = 49,
+ CR_VENDOR_NEC_CHALLENGE_RESPONSE = 50,
+} TRBType;
+
+typedef enum TRBCCode {
+ CC_INVALID = 0,
+ CC_SUCCESS,
+ CC_DATA_BUFFER_ERROR,
+ CC_BABBLE_DETECTED,
+ CC_USB_TRANSACTION_ERROR,
+ CC_TRB_ERROR,
+ CC_STALL_ERROR,
+ CC_RESOURCE_ERROR,
+ CC_BANDWIDTH_ERROR,
+ CC_NO_SLOTS_ERROR,
+ CC_INVALID_STREAM_TYPE_ERROR,
+ CC_SLOT_NOT_ENABLED_ERROR,
+ CC_EP_NOT_ENABLED_ERROR,
+ CC_SHORT_PACKET,
+ CC_RING_UNDERRUN,
+ CC_RING_OVERRUN,
+ CC_VF_ER_FULL,
+ CC_PARAMETER_ERROR,
+ CC_BANDWIDTH_OVERRUN,
+ CC_CONTEXT_STATE_ERROR,
+ CC_NO_PING_RESPONSE_ERROR,
+ CC_EVENT_RING_FULL_ERROR,
+ CC_INCOMPATIBLE_DEVICE_ERROR,
+ CC_MISSED_SERVICE_ERROR,
+ CC_COMMAND_RING_STOPPED,
+ CC_COMMAND_ABORTED,
+ CC_STOPPED,
+ CC_STOPPED_LENGTH_INVALID,
+ CC_MAX_EXIT_LATENCY_TOO_LARGE_ERROR = 29,
+ CC_ISOCH_BUFFER_OVERRUN = 31,
+ CC_EVENT_LOST_ERROR,
+ CC_UNDEFINED_ERROR,
+ CC_INVALID_STREAM_ID_ERROR,
+ CC_SECONDARY_BANDWIDTH_ERROR,
+ CC_SPLIT_TRANSACTION_ERROR
+} TRBCCode;
+
+typedef struct XHCIRing {
+ dma_addr_t dequeue;
+ bool ccs;
+} XHCIRing;
+
+typedef struct XHCIPort {
+ XHCIState *xhci;
+ uint32_t portsc;
+ uint32_t portnr;
+ USBPort *uport;
+ uint32_t speedmask;
+ char name[16];
+ MemoryRegion mem;
+} XHCIPort;
+
+typedef struct XHCISlot {
+ bool enabled;
+ bool addressed;
+ dma_addr_t ctx;
+ USBPort *uport;
+ XHCIEPContext *eps[31];
+} XHCISlot;
+
+typedef struct XHCIEvent {
+ TRBType type;
+ TRBCCode ccode;
+ uint64_t ptr;
+ uint32_t length;
+ uint32_t flags;
+ uint8_t slotid;
+ uint8_t epid;
+} XHCIEvent;
+
+typedef struct XHCIInterrupter {
+ uint32_t iman;
+ uint32_t imod;
+ uint32_t erstsz;
+ uint32_t erstba_low;
+ uint32_t erstba_high;
+ uint32_t erdp_low;
+ uint32_t erdp_high;
+
+ bool msix_used, er_pcs;
+
+ dma_addr_t er_start;
+ uint32_t er_size;
+ unsigned int er_ep_idx;
+
+ /* kept for live migration compat only */
+ bool er_full_unused;
+ XHCIEvent ev_buffer[EV_QUEUE];
+ unsigned int ev_buffer_put;
+ unsigned int ev_buffer_get;
+
+} XHCIInterrupter;
+
+struct XHCIState {
+ /*< private >*/
+ PCIDevice parent_obj;
+ /*< public >*/
+
+ USBBus bus;
+ MemoryRegion mem;
+ MemoryRegion mem_cap;
+ MemoryRegion mem_oper;
+ MemoryRegion mem_runtime;
+ MemoryRegion mem_doorbell;
+
+ /* properties */
+ uint32_t numports_2;
+ uint32_t numports_3;
+ uint32_t numintrs;
+ uint32_t numslots;
+ uint32_t flags;
+ uint32_t max_pstreams_mask;
+ OnOffAuto msi;
+ OnOffAuto msix;
+
+ /* Operational Registers */
+ uint32_t usbcmd;
+ uint32_t usbsts;
+ uint32_t dnctrl;
+ uint32_t crcr_low;
+ uint32_t crcr_high;
+ uint32_t dcbaap_low;
+ uint32_t dcbaap_high;
+ uint32_t config;
+
+ USBPort uports[MAX(MAXPORTS_2, MAXPORTS_3)];
+ XHCIPort ports[MAXPORTS];
+ XHCISlot slots[MAXSLOTS];
+ uint32_t numports;
+
+ /* Runtime Registers */
+ int64_t mfindex_start;
+ QEMUTimer *mfwrap_timer;
+ XHCIInterrupter intr[MAXINTRS];
+
+ XHCIRing cmd_ring;
+
+ bool nec_quirks;
+};
diff --git a/hw/usb/hcd-xhci-nec.c b/hw/usb/hcd-xhci-nec.c
new file mode 100644
index 0000000000..75715a048a
--- /dev/null
+++ b/hw/usb/hcd-xhci-nec.c
@@ -0,0 +1,63 @@
+/*
+ * USB xHCI controller emulation
+ *
+ * Copyright (c) 2011 Securiforest
+ * Date: 2011-05-11 ; Author: Hector Martin <hector@marcansoft.com>
+ * Based on usb-ohci.c, emulates Renesas NEC USB 3.0
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "qemu/osdep.h"
+#include "hw/hw.h"
+#include "hw/usb.h"
+#include "hw/pci/pci.h"
+
+#include "hcd-xhci.h"
+
+static Property nec_xhci_properties[] = {
+ DEFINE_PROP_ON_OFF_AUTO("msi", XHCIState, msi, ON_OFF_AUTO_AUTO),
+ DEFINE_PROP_ON_OFF_AUTO("msix", XHCIState, msix, ON_OFF_AUTO_AUTO),
+ DEFINE_PROP_BIT("superspeed-ports-first",
+ XHCIState, flags, XHCI_FLAG_SS_FIRST, true),
+ DEFINE_PROP_BIT("force-pcie-endcap", XHCIState, flags,
+ XHCI_FLAG_FORCE_PCIE_ENDCAP, false),
+ DEFINE_PROP_UINT32("intrs", XHCIState, numintrs, MAXINTRS),
+ DEFINE_PROP_UINT32("slots", XHCIState, numslots, MAXSLOTS),
+ DEFINE_PROP_END_OF_LIST(),
+};
+
+static void nec_xhci_class_init(ObjectClass *klass, void *data)
+{
+ PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
+ DeviceClass *dc = DEVICE_CLASS(klass);
+
+ dc->props = nec_xhci_properties;
+ k->vendor_id = PCI_VENDOR_ID_NEC;
+ k->device_id = PCI_DEVICE_ID_NEC_UPD720200;
+ k->revision = 0x03;
+}
+
+static const TypeInfo nec_xhci_info = {
+ .name = TYPE_NEC_XHCI,
+ .parent = TYPE_XHCI,
+ .class_init = nec_xhci_class_init,
+};
+
+static void nec_xhci_register_types(void)
+{
+ type_register_static(&nec_xhci_info);
+}
+
+type_init(nec_xhci_register_types)
diff --git a/hw/usb/hcd-xhci.c b/hw/usb/hcd-xhci.c
index 77d8e1137a..a0c7960a7b 100644
--- a/hw/usb/hcd-xhci.c
+++ b/hw/usb/hcd-xhci.c
@@ -29,6 +29,8 @@
#include "trace.h"
#include "qapi/error.h"
+#include "hcd-xhci.h"
+
//#define DEBUG_XHCI
//#define DEBUG_DATA
@@ -40,16 +42,6 @@
#define FIXME(_msg) do { fprintf(stderr, "FIXME %s:%d %s\n", \
__func__, __LINE__, _msg); abort(); } while (0)
-#define MAXPORTS_2 15
-#define MAXPORTS_3 15
-
-#define MAXPORTS (MAXPORTS_2+MAXPORTS_3)
-#define MAXSLOTS 64
-#define MAXINTRS 16
-
-/* Very pessimistic, let's hope it's enough for all cases */
-#define EV_QUEUE (((3 * 24) + 16) * MAXSLOTS)
-
#define TRB_LINK_LIMIT 32
#define COMMAND_LIMIT 256
#define TRANSFER_LIMIT 256
@@ -164,84 +156,8 @@ enum {
PLS_RESUME = 15,
};
-typedef enum TRBType {
- TRB_RESERVED = 0,
- TR_NORMAL,
- TR_SETUP,
- TR_DATA,
- TR_STATUS,
- TR_ISOCH,
- TR_LINK,
- TR_EVDATA,
- TR_NOOP,
- CR_ENABLE_SLOT,
- CR_DISABLE_SLOT,
- CR_ADDRESS_DEVICE,
- CR_CONFIGURE_ENDPOINT,
- CR_EVALUATE_CONTEXT,
- CR_RESET_ENDPOINT,
- CR_STOP_ENDPOINT,
- CR_SET_TR_DEQUEUE,
- CR_RESET_DEVICE,
- CR_FORCE_EVENT,
- CR_NEGOTIATE_BW,
- CR_SET_LATENCY_TOLERANCE,
- CR_GET_PORT_BANDWIDTH,
- CR_FORCE_HEADER,
- CR_NOOP,
- ER_TRANSFER = 32,
- ER_COMMAND_COMPLETE,
- ER_PORT_STATUS_CHANGE,
- ER_BANDWIDTH_REQUEST,
- ER_DOORBELL,
- ER_HOST_CONTROLLER,
- ER_DEVICE_NOTIFICATION,
- ER_MFINDEX_WRAP,
- /* vendor specific bits */
- CR_VENDOR_NEC_FIRMWARE_REVISION = 49,
- CR_VENDOR_NEC_CHALLENGE_RESPONSE = 50,
-} TRBType;
-
#define CR_LINK TR_LINK
-typedef enum TRBCCode {
- CC_INVALID = 0,
- CC_SUCCESS,
- CC_DATA_BUFFER_ERROR,
- CC_BABBLE_DETECTED,
- CC_USB_TRANSACTION_ERROR,
- CC_TRB_ERROR,
- CC_STALL_ERROR,
- CC_RESOURCE_ERROR,
- CC_BANDWIDTH_ERROR,
- CC_NO_SLOTS_ERROR,
- CC_INVALID_STREAM_TYPE_ERROR,
- CC_SLOT_NOT_ENABLED_ERROR,
- CC_EP_NOT_ENABLED_ERROR,
- CC_SHORT_PACKET,
- CC_RING_UNDERRUN,
- CC_RING_OVERRUN,
- CC_VF_ER_FULL,
- CC_PARAMETER_ERROR,
- CC_BANDWIDTH_OVERRUN,
- CC_CONTEXT_STATE_ERROR,
- CC_NO_PING_RESPONSE_ERROR,
- CC_EVENT_RING_FULL_ERROR,
- CC_INCOMPATIBLE_DEVICE_ERROR,
- CC_MISSED_SERVICE_ERROR,
- CC_COMMAND_RING_STOPPED,
- CC_COMMAND_ABORTED,
- CC_STOPPED,
- CC_STOPPED_LENGTH_INVALID,
- CC_MAX_EXIT_LATENCY_TOO_LARGE_ERROR = 29,
- CC_ISOCH_BUFFER_OVERRUN = 31,
- CC_EVENT_LOST_ERROR,
- CC_UNDEFINED_ERROR,
- CC_INVALID_STREAM_ID_ERROR,
- CC_SECONDARY_BANDWIDTH_ERROR,
- CC_SPLIT_TRANSACTION_ERROR
-} TRBCCode;
-
#define TRB_C (1<<0)
#define TRB_TYPE_SHIFT 10
#define TRB_TYPE_MASK 0x3f
@@ -301,10 +217,6 @@ typedef enum TRBCCode {
#define SLOT_CONTEXT_ENTRIES_MASK 0x1f
#define SLOT_CONTEXT_ENTRIES_SHIFT 27
-typedef struct XHCIState XHCIState;
-typedef struct XHCIStreamContext XHCIStreamContext;
-typedef struct XHCIEPContext XHCIEPContext;
-
#define get_field(data, field) \
(((data) >> field##_SHIFT) & field##_MASK)
@@ -326,21 +238,6 @@ typedef enum EPType {
ET_INTR_IN,
} EPType;
-typedef struct XHCIRing {
- dma_addr_t dequeue;
- bool ccs;
-} XHCIRing;
-
-typedef struct XHCIPort {
- XHCIState *xhci;
- uint32_t portsc;
- uint32_t portnr;
- USBPort *uport;
- uint32_t speedmask;
- char name[16];
- MemoryRegion mem;
-} XHCIPort;
-
typedef struct XHCITransfer {
XHCIEPContext *epctx;
USBPacket packet;
@@ -402,101 +299,6 @@ struct XHCIEPContext {
QEMUTimer *kick_timer;
};
-typedef struct XHCISlot {
- bool enabled;
- bool addressed;
- dma_addr_t ctx;
- USBPort *uport;
- XHCIEPContext * eps[31];
-} XHCISlot;
-
-typedef struct XHCIEvent {
- TRBType type;
- TRBCCode ccode;
- uint64_t ptr;
- uint32_t length;
- uint32_t flags;
- uint8_t slotid;
- uint8_t epid;
-} XHCIEvent;
-
-typedef struct XHCIInterrupter {
- uint32_t iman;
- uint32_t imod;
- uint32_t erstsz;
- uint32_t erstba_low;
- uint32_t erstba_high;
- uint32_t erdp_low;
- uint32_t erdp_high;
-
- bool msix_used, er_pcs;
-
- dma_addr_t er_start;
- uint32_t er_size;
- unsigned int er_ep_idx;
-
- /* kept for live migration compat only */
- bool er_full_unused;
- XHCIEvent ev_buffer[EV_QUEUE];
- unsigned int ev_buffer_put;
- unsigned int ev_buffer_get;
-
-} XHCIInterrupter;
-
-struct XHCIState {
- /*< private >*/
- PCIDevice parent_obj;
- /*< public >*/
-
- USBBus bus;
- MemoryRegion mem;
- MemoryRegion mem_cap;
- MemoryRegion mem_oper;
- MemoryRegion mem_runtime;
- MemoryRegion mem_doorbell;
-
- /* properties */
- uint32_t numports_2;
- uint32_t numports_3;
- uint32_t numintrs;
- uint32_t numslots;
- uint32_t flags;
- uint32_t max_pstreams_mask;
- OnOffAuto msi;
- OnOffAuto msix;
-
- /* Operational Registers */
- uint32_t usbcmd;
- uint32_t usbsts;
- uint32_t dnctrl;
- uint32_t crcr_low;
- uint32_t crcr_high;
- uint32_t dcbaap_low;
- uint32_t dcbaap_high;
- uint32_t config;
-
- USBPort uports[MAX(MAXPORTS_2, MAXPORTS_3)];
- XHCIPort ports[MAXPORTS];
- XHCISlot slots[MAXSLOTS];
- uint32_t numports;
-
- /* Runtime Registers */
- int64_t mfindex_start;
- QEMUTimer *mfwrap_timer;
- XHCIInterrupter intr[MAXINTRS];
-
- XHCIRing cmd_ring;
-
- bool nec_quirks;
-};
-
-#define TYPE_XHCI "base-xhci"
-#define TYPE_NEC_XHCI "nec-usb-xhci"
-#define TYPE_QEMU_XHCI "qemu-xhci"
-
-#define XHCI(obj) \
- OBJECT_CHECK(XHCIState, (obj), TYPE_XHCI)
-
typedef struct XHCIEvRingSeg {
uint32_t addr_low;
uint32_t addr_high;
@@ -504,12 +306,6 @@ typedef struct XHCIEvRingSeg {
uint32_t rsvd;
} XHCIEvRingSeg;
-enum xhci_flags {
- XHCI_FLAG_SS_FIRST = 1,
- XHCI_FLAG_FORCE_PCIE_ENDCAP,
- XHCI_FLAG_ENABLE_STREAMS,
-};
-
static void xhci_kick_ep(XHCIState *xhci, unsigned int slotid,
unsigned int epid, unsigned int streamid);
static void xhci_kick_epctx(XHCIEPContext *epctx, unsigned int streamid);
@@ -3843,18 +3639,6 @@ static const VMStateDescription vmstate_xhci = {
}
};
-static Property nec_xhci_properties[] = {
- DEFINE_PROP_ON_OFF_AUTO("msi", XHCIState, msi, ON_OFF_AUTO_AUTO),
- DEFINE_PROP_ON_OFF_AUTO("msix", XHCIState, msix, ON_OFF_AUTO_AUTO),
- DEFINE_PROP_BIT("superspeed-ports-first",
- XHCIState, flags, XHCI_FLAG_SS_FIRST, true),
- DEFINE_PROP_BIT("force-pcie-endcap", XHCIState, flags,
- XHCI_FLAG_FORCE_PCIE_ENDCAP, false),
- DEFINE_PROP_UINT32("intrs", XHCIState, numintrs, MAXINTRS),
- DEFINE_PROP_UINT32("slots", XHCIState, numslots, MAXSLOTS),
- DEFINE_PROP_END_OF_LIST(),
-};
-
static Property xhci_properties[] = {
DEFINE_PROP_BIT("streams", XHCIState, flags,
XHCI_FLAG_ENABLE_STREAMS, true),
@@ -3886,23 +3670,6 @@ static const TypeInfo xhci_info = {
.abstract = true,
};
-static void nec_xhci_class_init(ObjectClass *klass, void *data)
-{
- PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
- DeviceClass *dc = DEVICE_CLASS(klass);
-
- dc->props = nec_xhci_properties;
- k->vendor_id = PCI_VENDOR_ID_NEC;
- k->device_id = PCI_DEVICE_ID_NEC_UPD720200;
- k->revision = 0x03;
-}
-
-static const TypeInfo nec_xhci_info = {
- .name = TYPE_NEC_XHCI,
- .parent = TYPE_XHCI,
- .class_init = nec_xhci_class_init,
-};
-
static void qemu_xhci_class_init(ObjectClass *klass, void *data)
{
PCIDeviceClass *k = PCI_DEVICE_CLASS(klass);
@@ -3933,7 +3700,6 @@ static const TypeInfo qemu_xhci_info = {
static void xhci_register_types(void)
{
type_register_static(&xhci_info);
- type_register_static(&nec_xhci_info);
type_register_static(&qemu_xhci_info);
}
diff --git a/hw/usb/Makefile.objs b/hw/usb/Makefile.objs
index 5958be8ce3..249106f32d 100644
--- a/hw/usb/Makefile.objs
+++ b/hw/usb/Makefile.objs
@@ -8,6 +8,7 @@ common-obj-$(CONFIG_USB_OHCI) += hcd-ohci.o
common-obj-$(CONFIG_USB_EHCI) += hcd-ehci.o hcd-ehci-pci.o
common-obj-$(CONFIG_USB_EHCI_SYSBUS) += hcd-ehci-sysbus.o
common-obj-$(CONFIG_USB_XHCI) += hcd-xhci.o
+common-obj-$(CONFIG_USB_XHCI) += hcd-xhci-nec.o
common-obj-$(CONFIG_USB_MUSB) += hcd-musb.o
obj-$(CONFIG_TUSB6010) += tusb6010.o
--
2.9.3
next prev parent reply other threads:[~2017-05-29 13:10 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-05-29 13:09 [Qemu-devel] [PULL 0/9] usb patch queue Gerd Hoffmann
2017-05-29 13:09 ` [Qemu-devel] [PULL 1/9] ehci: fix overflow in frame timer code Gerd Hoffmann
2017-05-29 13:09 ` [Qemu-devel] [PULL 2/9] usb: Deprecate the legacy -usbdevice option Gerd Hoffmann
2017-05-29 13:09 ` [Qemu-devel] [PULL 3/9] usb: Deprecate HMP commands usb_add and usb_del Gerd Hoffmann
2017-05-29 13:09 ` [Qemu-devel] [PULL 4/9] usb: Simplify the parameter parsing of the legacy usb serial device Gerd Hoffmann
2017-05-29 13:09 ` Gerd Hoffmann [this message]
2017-05-29 13:09 ` [Qemu-devel] [PULL 6/9] xhci: add CONFIG_USB_XHCI_NEC option Gerd Hoffmann
2017-05-29 13:09 ` [Qemu-devel] [PULL 7/9] usb-hub: set PORT_STAT_C_SUSPEND on host-initiated wake-up Gerd Hoffmann
2017-05-29 13:09 ` [Qemu-devel] [PULL 8/9] usb: don't wakeup during coldplug Gerd Hoffmann
2017-05-29 13:09 ` [Qemu-devel] [PULL 9/9] ehci: fix frame timer invocation Gerd Hoffmann
2017-05-30 9:43 ` [Qemu-devel] [PULL 0/9] usb patch queue Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170529130956.20297-6-kraxel@redhat.com \
--to=kraxel@redhat.com \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.