All of lore.kernel.org
 help / color / mirror / Atom feed
From: Marc Zyngier <marc.zyngier@arm.com>
To: "Radim Krčmář" <rkrcmar@redhat.com>,
	"Paolo Bonzini" <pbonzini@redhat.com>
Cc: Christoffer Dall <cdall@linaro.org>,
	Stefan Traby <stefan@hello-penguin.com>,
	kvm@vger.kernel.org, David Daney <david.daney@cavium.com>,
	Catalin Marinas <catalin.marinas@arm.com>,
	Hu Huajun <huhuajun@huawei.com>,
	kvmarm@lists.cs.columbia.edu,
	linux-arm-kernel@lists.infradead.org
Subject: [PATCH 34/58] KVM: arm64: vgic-v3: Add ICV_EOIR1_EL1 handler
Date: Fri, 30 Jun 2017 09:44:50 +0100	[thread overview]
Message-ID: <20170630084514.6779-35-marc.zyngier@arm.com> (raw)
In-Reply-To: <20170630084514.6779-1-marc.zyngier@arm.com>

Add a handler for writing the guest's view of the ICC_EOIR1_EL1
register. This involves dropping the priority of the interrupt,
and deactivating it if required (EOImode == 0).

Tested-by: Alexander Graf <agraf@suse.de>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
---
 include/linux/irqchip/arm-gic-v3.h |   2 +
 virt/kvm/arm/hyp/vgic-v3-sr.c      | 120 +++++++++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+)

diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index d70668fae003..1f458ac6f494 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -417,6 +417,8 @@
 
 #define ICH_HCR_EN			(1 << 0)
 #define ICH_HCR_UIE			(1 << 1)
+#define ICH_HCR_EOIcount_SHIFT		27
+#define ICH_HCR_EOIcount_MASK		(0x1f << ICH_HCR_EOIcount_SHIFT)
 
 #define ICH_VMCR_ACK_CTL_SHIFT		2
 #define ICH_VMCR_ACK_CTL_MASK		(1 << ICH_VMCR_ACK_CTL_SHIFT)
diff --git a/virt/kvm/arm/hyp/vgic-v3-sr.c b/virt/kvm/arm/hyp/vgic-v3-sr.c
index 5a20f8d5bada..e9ff99112c4d 100644
--- a/virt/kvm/arm/hyp/vgic-v3-sr.c
+++ b/virt/kvm/arm/hyp/vgic-v3-sr.c
@@ -432,6 +432,26 @@ static int __hyp_text __vgic_v3_highest_priority_lr(struct kvm_vcpu *vcpu,
 	return lr;
 }
 
+static int __hyp_text __vgic_v3_find_active_lr(struct kvm_vcpu *vcpu,
+					       int intid, u64 *lr_val)
+{
+	unsigned int used_lrs = vcpu->arch.vgic_cpu.used_lrs;
+	int i;
+
+	for (i = 0; i < used_lrs; i++) {
+		u64 val = __gic_v3_get_lr(i);
+
+		if ((val & ICH_LR_VIRTUAL_ID_MASK) == intid &&
+		    (val & ICH_LR_ACTIVE_BIT)) {
+			*lr_val = val;
+			return i;
+		}
+	}
+
+	*lr_val = ICC_IAR1_EL1_SPURIOUS;
+	return -1;
+}
+
 static int __hyp_text __vgic_v3_get_highest_active_priority(void)
 {
 	u8 nr_apr_regs = vtr_to_nr_apr_regs(read_gicreg(ICH_VTR_EL2));
@@ -525,6 +545,44 @@ static void __hyp_text __vgic_v3_set_active_priority(u8 pri, u32 vmcr, int grp)
 	}
 }
 
+static int __hyp_text __vgic_v3_clear_highest_active_priority(void)
+{
+	u8 nr_apr_regs = vtr_to_nr_apr_regs(read_gicreg(ICH_VTR_EL2));
+	u32 hap = 0;
+	int i;
+
+	for (i = 0; i < nr_apr_regs; i++) {
+		u32 ap0, ap1;
+		int c0, c1;
+
+		ap0 = __vgic_v3_read_ap0rn(i);
+		ap1 = __vgic_v3_read_ap1rn(i);
+		if (!ap0 && !ap1) {
+			hap += 32;
+			continue;
+		}
+
+		c0 = ap0 ? __ffs(ap0) : 32;
+		c1 = ap1 ? __ffs(ap1) : 32;
+
+		/* Always clear the LSB, which is the highest priority */
+		if (c0 < c1) {
+			ap0 &= ~BIT(c0);
+			__vgic_v3_write_ap0rn(ap0, i);
+			hap += c0;
+		} else {
+			ap1 &= ~BIT(c1);
+			__vgic_v3_write_ap1rn(ap1, i);
+			hap += c1;
+		}
+
+		/* Rescale to 8 bits of priority */
+		return hap << __vgic_v3_bpr_min();
+	}
+
+	return GICv3_IDLE_PRIORITY;
+}
+
 static void __hyp_text __vgic_v3_read_iar(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
 {
 	u64 lr_val;
@@ -561,6 +619,65 @@ static void __hyp_text __vgic_v3_read_iar(struct kvm_vcpu *vcpu, u32 vmcr, int r
 	vcpu_set_reg(vcpu, rt, ICC_IAR1_EL1_SPURIOUS);
 }
 
+static void __hyp_text __vgic_v3_clear_active_lr(int lr, u64 lr_val)
+{
+	lr_val &= ~ICH_LR_ACTIVE_BIT;
+	if (lr_val & ICH_LR_HW) {
+		u32 pid;
+
+		pid = (lr_val & ICH_LR_PHYS_ID_MASK) >> ICH_LR_PHYS_ID_SHIFT;
+		gic_write_dir(pid);
+	}
+
+	__gic_v3_set_lr(lr_val, lr);
+}
+
+static void __hyp_text __vgic_v3_bump_eoicount(void)
+{
+	u32 hcr;
+
+	hcr = read_gicreg(ICH_HCR_EL2);
+	hcr += 1 << ICH_HCR_EOIcount_SHIFT;
+	write_gicreg(hcr, ICH_HCR_EL2);
+}
+
+static void __hyp_text __vgic_v3_write_eoir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 vid = vcpu_get_reg(vcpu, rt);
+	u64 lr_val;
+	u8 lr_prio, act_prio;
+	int lr, grp;
+
+	grp = __vgic_v3_get_group(vcpu);
+
+	/* Drop priority in any case */
+	act_prio = __vgic_v3_clear_highest_active_priority();
+
+	/* If EOIing an LPI, no deactivate to be performed */
+	if (vid >= VGIC_MIN_LPI)
+		return;
+
+	/* EOImode == 1, nothing to be done here */
+	if (vmcr & ICH_VMCR_EOIM_MASK)
+		return;
+
+	lr = __vgic_v3_find_active_lr(vcpu, vid, &lr_val);
+	if (lr == -1) {
+		__vgic_v3_bump_eoicount();
+		return;
+	}
+
+	lr_prio = (lr_val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT;
+
+	/* If priorities or group do not match, the guest has fscked-up. */
+	if (grp != !!(lr_val & ICH_LR_GROUP) ||
+	    __vgic_v3_pri_to_pre(lr_prio, vmcr, grp) != act_prio)
+		return;
+
+	/* Let's now perform the deactivation */
+	__vgic_v3_clear_active_lr(lr, lr_val);
+}
+
 static void __hyp_text __vgic_v3_read_igrpen1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
 {
 	vcpu_set_reg(vcpu, rt, !!(vmcr & ICH_VMCR_ENG1_MASK));
@@ -628,6 +745,9 @@ int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
 	case SYS_ICC_IAR1_EL1:
 		fn = __vgic_v3_read_iar;
 		break;
+	case SYS_ICC_EOIR1_EL1:
+		fn = __vgic_v3_write_eoir;
+		break;
 	case SYS_ICC_GRPEN1_EL1:
 		if (is_read)
 			fn = __vgic_v3_read_igrpen1;
-- 
2.11.0

WARNING: multiple messages have this Message-ID (diff)
From: marc.zyngier@arm.com (Marc Zyngier)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 34/58] KVM: arm64: vgic-v3: Add ICV_EOIR1_EL1 handler
Date: Fri, 30 Jun 2017 09:44:50 +0100	[thread overview]
Message-ID: <20170630084514.6779-35-marc.zyngier@arm.com> (raw)
In-Reply-To: <20170630084514.6779-1-marc.zyngier@arm.com>

Add a handler for writing the guest's view of the ICC_EOIR1_EL1
register. This involves dropping the priority of the interrupt,
and deactivating it if required (EOImode == 0).

Tested-by: Alexander Graf <agraf@suse.de>
Acked-by: David Daney <david.daney@cavium.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Signed-off-by: Marc Zyngier <marc.zyngier@arm.com>
Reviewed-by: Christoffer Dall <cdall@linaro.org>
Signed-off-by: Christoffer Dall <cdall@linaro.org>
---
 include/linux/irqchip/arm-gic-v3.h |   2 +
 virt/kvm/arm/hyp/vgic-v3-sr.c      | 120 +++++++++++++++++++++++++++++++++++++
 2 files changed, 122 insertions(+)

diff --git a/include/linux/irqchip/arm-gic-v3.h b/include/linux/irqchip/arm-gic-v3.h
index d70668fae003..1f458ac6f494 100644
--- a/include/linux/irqchip/arm-gic-v3.h
+++ b/include/linux/irqchip/arm-gic-v3.h
@@ -417,6 +417,8 @@
 
 #define ICH_HCR_EN			(1 << 0)
 #define ICH_HCR_UIE			(1 << 1)
+#define ICH_HCR_EOIcount_SHIFT		27
+#define ICH_HCR_EOIcount_MASK		(0x1f << ICH_HCR_EOIcount_SHIFT)
 
 #define ICH_VMCR_ACK_CTL_SHIFT		2
 #define ICH_VMCR_ACK_CTL_MASK		(1 << ICH_VMCR_ACK_CTL_SHIFT)
diff --git a/virt/kvm/arm/hyp/vgic-v3-sr.c b/virt/kvm/arm/hyp/vgic-v3-sr.c
index 5a20f8d5bada..e9ff99112c4d 100644
--- a/virt/kvm/arm/hyp/vgic-v3-sr.c
+++ b/virt/kvm/arm/hyp/vgic-v3-sr.c
@@ -432,6 +432,26 @@ static int __hyp_text __vgic_v3_highest_priority_lr(struct kvm_vcpu *vcpu,
 	return lr;
 }
 
+static int __hyp_text __vgic_v3_find_active_lr(struct kvm_vcpu *vcpu,
+					       int intid, u64 *lr_val)
+{
+	unsigned int used_lrs = vcpu->arch.vgic_cpu.used_lrs;
+	int i;
+
+	for (i = 0; i < used_lrs; i++) {
+		u64 val = __gic_v3_get_lr(i);
+
+		if ((val & ICH_LR_VIRTUAL_ID_MASK) == intid &&
+		    (val & ICH_LR_ACTIVE_BIT)) {
+			*lr_val = val;
+			return i;
+		}
+	}
+
+	*lr_val = ICC_IAR1_EL1_SPURIOUS;
+	return -1;
+}
+
 static int __hyp_text __vgic_v3_get_highest_active_priority(void)
 {
 	u8 nr_apr_regs = vtr_to_nr_apr_regs(read_gicreg(ICH_VTR_EL2));
@@ -525,6 +545,44 @@ static void __hyp_text __vgic_v3_set_active_priority(u8 pri, u32 vmcr, int grp)
 	}
 }
 
+static int __hyp_text __vgic_v3_clear_highest_active_priority(void)
+{
+	u8 nr_apr_regs = vtr_to_nr_apr_regs(read_gicreg(ICH_VTR_EL2));
+	u32 hap = 0;
+	int i;
+
+	for (i = 0; i < nr_apr_regs; i++) {
+		u32 ap0, ap1;
+		int c0, c1;
+
+		ap0 = __vgic_v3_read_ap0rn(i);
+		ap1 = __vgic_v3_read_ap1rn(i);
+		if (!ap0 && !ap1) {
+			hap += 32;
+			continue;
+		}
+
+		c0 = ap0 ? __ffs(ap0) : 32;
+		c1 = ap1 ? __ffs(ap1) : 32;
+
+		/* Always clear the LSB, which is the highest priority */
+		if (c0 < c1) {
+			ap0 &= ~BIT(c0);
+			__vgic_v3_write_ap0rn(ap0, i);
+			hap += c0;
+		} else {
+			ap1 &= ~BIT(c1);
+			__vgic_v3_write_ap1rn(ap1, i);
+			hap += c1;
+		}
+
+		/* Rescale to 8 bits of priority */
+		return hap << __vgic_v3_bpr_min();
+	}
+
+	return GICv3_IDLE_PRIORITY;
+}
+
 static void __hyp_text __vgic_v3_read_iar(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
 {
 	u64 lr_val;
@@ -561,6 +619,65 @@ static void __hyp_text __vgic_v3_read_iar(struct kvm_vcpu *vcpu, u32 vmcr, int r
 	vcpu_set_reg(vcpu, rt, ICC_IAR1_EL1_SPURIOUS);
 }
 
+static void __hyp_text __vgic_v3_clear_active_lr(int lr, u64 lr_val)
+{
+	lr_val &= ~ICH_LR_ACTIVE_BIT;
+	if (lr_val & ICH_LR_HW) {
+		u32 pid;
+
+		pid = (lr_val & ICH_LR_PHYS_ID_MASK) >> ICH_LR_PHYS_ID_SHIFT;
+		gic_write_dir(pid);
+	}
+
+	__gic_v3_set_lr(lr_val, lr);
+}
+
+static void __hyp_text __vgic_v3_bump_eoicount(void)
+{
+	u32 hcr;
+
+	hcr = read_gicreg(ICH_HCR_EL2);
+	hcr += 1 << ICH_HCR_EOIcount_SHIFT;
+	write_gicreg(hcr, ICH_HCR_EL2);
+}
+
+static void __hyp_text __vgic_v3_write_eoir(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
+{
+	u32 vid = vcpu_get_reg(vcpu, rt);
+	u64 lr_val;
+	u8 lr_prio, act_prio;
+	int lr, grp;
+
+	grp = __vgic_v3_get_group(vcpu);
+
+	/* Drop priority in any case */
+	act_prio = __vgic_v3_clear_highest_active_priority();
+
+	/* If EOIing an LPI, no deactivate to be performed */
+	if (vid >= VGIC_MIN_LPI)
+		return;
+
+	/* EOImode == 1, nothing to be done here */
+	if (vmcr & ICH_VMCR_EOIM_MASK)
+		return;
+
+	lr = __vgic_v3_find_active_lr(vcpu, vid, &lr_val);
+	if (lr == -1) {
+		__vgic_v3_bump_eoicount();
+		return;
+	}
+
+	lr_prio = (lr_val & ICH_LR_PRIORITY_MASK) >> ICH_LR_PRIORITY_SHIFT;
+
+	/* If priorities or group do not match, the guest has fscked-up. */
+	if (grp != !!(lr_val & ICH_LR_GROUP) ||
+	    __vgic_v3_pri_to_pre(lr_prio, vmcr, grp) != act_prio)
+		return;
+
+	/* Let's now perform the deactivation */
+	__vgic_v3_clear_active_lr(lr, lr_val);
+}
+
 static void __hyp_text __vgic_v3_read_igrpen1(struct kvm_vcpu *vcpu, u32 vmcr, int rt)
 {
 	vcpu_set_reg(vcpu, rt, !!(vmcr & ICH_VMCR_ENG1_MASK));
@@ -628,6 +745,9 @@ int __hyp_text __vgic_v3_perform_cpuif_access(struct kvm_vcpu *vcpu)
 	case SYS_ICC_IAR1_EL1:
 		fn = __vgic_v3_read_iar;
 		break;
+	case SYS_ICC_EOIR1_EL1:
+		fn = __vgic_v3_write_eoir;
+		break;
 	case SYS_ICC_GRPEN1_EL1:
 		if (is_read)
 			fn = __vgic_v3_read_igrpen1;
-- 
2.11.0

  parent reply	other threads:[~2017-06-30  8:44 UTC|newest]

Thread overview: 120+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-06-30  8:44 [GIT PULL] KVM/ARM updates for 4.13 Marc Zyngier
2017-06-30  8:44 ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 01/58] KVM: arm: Restore banked registers and physical timer access on hyp_panic() Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 02/58] KVM: arm64: Restore host " Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 03/58] KVM: arm/arm64: Allow GICv2 to supply a uaccess register function Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 04/58] KVM: arm/arm64: Separate guest and uaccess writes to dist {sc}active Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 05/58] KVM: arm/arm64: Simplify active_change_prepare and plug race Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 06/58] KVM: arm/arm64: Use uaccess functions for GICv3 {sc}active Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 07/58] KVM: improve arch vcpu request defining Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 08/58] KVM: add kvm_request_pending Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 09/58] KVM: Add documentation for VCPU requests Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 10/58] KVM: arm/arm64: properly use vcpu requests Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 11/58] KVM: arm/arm64: replace pause checks with vcpu request checks Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 12/58] KVM: arm/arm64: use vcpu requests for power_off Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 13/58] KVM: arm/arm64: optimize VCPU RUN Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 14/58] KVM: arm/arm64: change exit request to sleep request Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 15/58] KVM: arm/arm64: use vcpu requests for irq injection Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 16/58] KVM: arm/arm64: PMU: remove request-less vcpu kick Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 17/58] KVM: arm/arm64: timer: " Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 18/58] KVM: arm64: Allow creating the PMU without the in-kernel GIC Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 19/58] KVM: arm: Handle VCPU device attributes in guest.c Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 20/58] KVM: arm/arm64: Move irq_is_ppi() to header file Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 21/58] KVM: arm/arm64: Move timer IRQ default init to arch_timer.c Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 22/58] KVM: arm/arm64: Allow setting the timer IRQ numbers from userspace Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 23/58] KVM: arm/arm64: Introduce an allocator for in-kernel irq lines Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 24/58] KVM: arm/arm64: Check if irq lines to the GIC are already used Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 25/58] KVM: arm/arm64: Disallow userspace control of in-kernel IRQ lines Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 26/58] KVM: arm/arm64: Don't assume initialized vgic when setting PMU IRQ Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 27/58] arm64: Add a facility to turn an ESR syndrome into a sysreg encoding Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 28/58] KVM: arm/arm64: vgic-v3: Add accessors for the ICH_APxRn_EL2 registers Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 29/58] KVM: arm64: Make kvm_condition_valid32() accessible from EL2 Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 30/58] KVM: arm64: vgic-v3: Add hook to handle guest GICv3 sysreg accesses at EL2 Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 31/58] KVM: arm64: vgic-v3: Add ICV_BPR1_EL1 handler Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 32/58] KVM: arm64: vgic-v3: Add ICV_IGRPEN1_EL1 handler Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 33/58] KVM: arm64: vgic-v3: Add ICV_IAR1_EL1 handler Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` Marc Zyngier [this message]
2017-06-30  8:44   ` [PATCH 34/58] KVM: arm64: vgic-v3: Add ICV_EOIR1_EL1 handler Marc Zyngier
2017-06-30  8:44 ` [PATCH 35/58] KVM: arm64: vgic-v3: Add ICV_AP1Rn_EL1 handler Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 36/58] KVM: arm64: vgic-v3: Add ICV_HPPIR1_EL1 handler Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 37/58] KVM: arm64: vgic-v3: Enable trapping of Group-1 system registers Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 38/58] KVM: arm64: Enable GICv3 Group-1 sysreg trapping via command-line Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 39/58] KVM: arm64: vgic-v3: Add ICV_BPR0_EL1 handler Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 40/58] KVM: arm64: vgic-v3: Add ICV_IGNREN0_EL1 handler Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 41/58] KVM: arm64: vgic-v3: Add misc Group-0 handlers Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 42/58] KVM: arm64: vgic-v3: Enable trapping of Group-0 system registers Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:44 ` [PATCH 43/58] KVM: arm64: Enable GICv3 Group-0 sysreg trapping via command-line Marc Zyngier
2017-06-30  8:44   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 44/58] arm64: Add MIDR values for Cavium cn83XX SoCs Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 45/58] arm64: Add workaround for Cavium Thunder erratum 30115 Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 46/58] KVM: arm64: vgic-v3: Add ICV_DIR_EL1 handler Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 47/58] KVM: arm64: vgic-v3: Add ICV_RPR_EL1 handler Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 48/58] KVM: arm64: vgic-v3: Add ICV_CTLR_EL1 handler Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 49/58] KVM: arm64: vgic-v3: Add ICV_PMR_EL1 handler Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 50/58] KVM: arm64: Enable GICv3 common sysreg trapping via command-line Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 51/58] KVM: arm64: vgic-v3: Log which GICv3 system registers are trapped Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 52/58] KVM: arm64: Log an error if trapping a read-from-write-only GICv3 access Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 53/58] KVM: arm64: Log an error if trapping a write-to-read-only " Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 54/58] arm64/kvm: sysreg: fix typo'd SYS_ICC_IGRPEN*_EL1 Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 55/58] arm64/kvm: vgic: use SYS_DESC() Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 56/58] KVM: ARM64: fix phy counter access failure in guest Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 57/58] KVM: arm/arm64: Signal SIGBUS when stage2 discovers hwpoison memory Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30  8:45 ` [PATCH 58/58] arm64: Remove a redundancy in sysreg.h Marc Zyngier
2017-06-30  8:45   ` Marc Zyngier
2017-06-30 10:39 ` [GIT PULL] KVM/ARM updates for 4.13 Paolo Bonzini
2017-06-30 10:39   ` Paolo Bonzini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170630084514.6779-35-marc.zyngier@arm.com \
    --to=marc.zyngier@arm.com \
    --cc=catalin.marinas@arm.com \
    --cc=cdall@linaro.org \
    --cc=david.daney@cavium.com \
    --cc=huhuajun@huawei.com \
    --cc=kvm@vger.kernel.org \
    --cc=kvmarm@lists.cs.columbia.edu \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=pbonzini@redhat.com \
    --cc=rkrcmar@redhat.com \
    --cc=stefan@hello-penguin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.