From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@vger.kernel.org
Cc: afal@milecki.pl, bcm-kernel-feedback-list@broadcom.com,
Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-arm-kernel@lists.infradead.org (moderated list:ARM PORT),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
Date: Tue, 18 Jul 2017 12:36:09 -0700 [thread overview]
Message-ID: <20170718193611.8543-1-f.fainelli@gmail.com> (raw)
Adds support for the Broadcom reference board BCM947189ACDMBR which
features the following:
* 128MB of DRAM
* External MoCA support through a Broadcom BCM6802 chip
* 1x external Gigabit PHY through the external BCM6802
* 1x USB 2.0 port
* 1x PCIE slot
* Few configurable buttons and LEDs
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7..236587e7f07d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -106,7 +106,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
new file mode 100644
index 000000000000..ef263412fea5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Broadcom BCM947189ACDBMR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 21 0>;
+ gpio-miso = <&chipcommon 22 0>;
+ gpio-mosi = <&chipcommon 23 0>;
+ cs-gpios = <&chipcommon 24 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External BCM6802 MoCA chip is connected */
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@vger.kernel.org
Cc: afal@milecki.pl, bcm-kernel-feedback-list@broadcom.com,
Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
"moderated list:ARM PORT" <linux-arm-kernel@lists.infradead.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
Date: Tue, 18 Jul 2017 12:36:09 -0700 [thread overview]
Message-ID: <20170718193611.8543-1-f.fainelli@gmail.com> (raw)
Adds support for the Broadcom reference board BCM947189ACDMBR which
features the following:
* 128MB of DRAM
* External MoCA support through a Broadcom BCM6802 chip
* 1x external Gigabit PHY through the external BCM6802
* 1x USB 2.0 port
* 1x PCIE slot
* Few configurable buttons and LEDs
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7..236587e7f07d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -106,7 +106,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
new file mode 100644
index 000000000000..ef263412fea5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Broadcom BCM947189ACDBMR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 21 0>;
+ gpio-miso = <&chipcommon 22 0>;
+ gpio-mosi = <&chipcommon 23 0>;
+ cs-gpios = <&chipcommon 24 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External BCM6802 MoCA chip is connected */
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge@0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi@0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support
Date: Tue, 18 Jul 2017 12:36:09 -0700 [thread overview]
Message-ID: <20170718193611.8543-1-f.fainelli@gmail.com> (raw)
Adds support for the Broadcom reference board BCM947189ACDMBR which
features the following:
* 128MB of DRAM
* External MoCA support through a Broadcom BCM6802 chip
* 1x external Gigabit PHY through the external BCM6802
* 1x USB 2.0 port
* 1x PCIE slot
* Few configurable buttons and LEDs
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/Makefile | 3 +-
arch/arm/boot/dts/bcm947189acdbmr.dts | 97 +++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+), 1 deletion(-)
create mode 100644 arch/arm/boot/dts/bcm947189acdbmr.dts
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index 4b17f35dc9a7..236587e7f07d 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -106,7 +106,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
bcm953012hr.dtb \
bcm953012k.dtb
dtb-$(CONFIG_ARCH_BCM_53573) += \
- bcm47189-tenda-ac9.dtb
+ bcm47189-tenda-ac9.dtb \
+ bcm947189acdbmr.dtb
dtb-$(CONFIG_ARCH_BCM_63XX) += \
bcm963138dvt.dtb
dtb-$(CONFIG_ARCH_BCM_CYGNUS) += \
diff --git a/arch/arm/boot/dts/bcm947189acdbmr.dts b/arch/arm/boot/dts/bcm947189acdbmr.dts
new file mode 100644
index 000000000000..ef263412fea5
--- /dev/null
+++ b/arch/arm/boot/dts/bcm947189acdbmr.dts
@@ -0,0 +1,97 @@
+/*
+ * Copyright (C) 2017 Broadcom
+ * Author: Florian Fainelli <f.fainelli@gmail.com>
+ *
+ * Licensed under the ISC license.
+ */
+
+/dts-v1/;
+
+#include "bcm53573.dtsi"
+
+/ {
+ compatible = "brcm,bcm947189acdbmr", "brcm,bcm47189", "brcm,bcm53573";
+ model = "Broadcom BCM947189ACDBMR";
+
+ chosen {
+ bootargs = "console=ttyS0,115200 earlycon";
+ };
+
+ memory {
+ reg = <0x00000000 0x08000000>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ wps {
+ label = "bcm53xx:blue:wps";
+ gpios = <&chipcommon 10 GPIO_ACTIVE_HIGH>;
+ };
+
+ 5ghz {
+ label = "bcm53xx:blue:5ghz";
+ gpios = <&chipcommon 11 GPIO_ACTIVE_HIGH>;
+ };
+
+ 2ghz {
+ label = "bcm53xx:blue:2ghz";
+ gpios = <&chipcommon 12 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ restart {
+ label = "Reset";
+ linux,code = <KEY_RESTART>;
+ gpios = <&chipcommon 7 GPIO_ACTIVE_HIGH>;
+ };
+
+ wps {
+ label = "WPS";
+ linux,code = <KEY_WPS_BUTTON>;
+ gpios = <&chipcommon 9 GPIO_ACTIVE_LOW>;
+ };
+ };
+
+ spi {
+ compatible = "spi-gpio";
+ num-chipselects = <1>;
+ gpio-sck = <&chipcommon 21 0>;
+ gpio-miso = <&chipcommon 22 0>;
+ gpio-mosi = <&chipcommon 23 0>;
+ cs-gpios = <&chipcommon 24 0>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ /* External BCM6802 MoCA chip is connected */
+ };
+};
+
+&pcie0 {
+ ranges = <0x00000000 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ bridge at 0,0,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0 0 0 0x00100000>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ wifi at 0,1,0 {
+ reg = <0x0000 0 0 0 0>;
+ ranges = <0x00000000 0 0 0 0x00100000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+ };
+};
+
+&usb2 {
+ vcc-gpio = <&chipcommon 8 GPIO_ACTIVE_HIGH>;
+};
--
2.9.3
next reply other threads:[~2017-07-18 19:36 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-07-18 19:36 Florian Fainelli [this message]
2017-07-18 19:36 ` [PATCH] ARM: dts: BCM53573: Add Broadcom BCM947189ACDBMR board support Florian Fainelli
2017-07-18 19:36 ` Florian Fainelli
2017-07-18 19:37 Florian Fainelli
2017-07-18 19:37 ` Florian Fainelli
2017-07-18 19:37 ` Florian Fainelli
2017-07-24 17:39 ` Florian Fainelli
2017-07-24 17:39 ` Florian Fainelli
2017-07-24 17:39 ` Florian Fainelli
2017-07-31 13:46 ` Rafał Miłecki
2017-07-31 13:46 ` Rafał Miłecki
2017-07-31 13:46 ` Rafał Miłecki
2017-08-07 17:42 ` Florian Fainelli
2017-08-07 17:42 ` Florian Fainelli
2017-08-07 17:42 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20170718193611.8543-1-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=afal@milecki.pl \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-arm-kernel@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.