From: Eric Anholt <eric@anholt.net> To: dri-devel@lists.freedesktop.org, Archit Taneja <architt@codeaurora.org>, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Thierry Reding <thierry.reding@gmail.com> Cc: linux-kernel@vger.kernel.org, Eric Anholt <eric@anholt.net> Subject: [PATCH v5 5/6] dt-bindings: Document the Raspberry Pi Touchscreen nodes. Date: Tue, 18 Jul 2017 14:05:09 -0700 [thread overview] Message-ID: <20170718210510.12229-5-eric@anholt.net> (raw) In-Reply-To: <20170718210510.12229-1-eric@anholt.net> This doesn't yet cover input, but the driver does get the display working when the firmware is disabled from talking to our I2C lines. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> --- .../panel/raspberrypi,7inch-touchscreen.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 000000000000..e9e19c059260 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Eric Anholt <eric@anholt.net> To: dri-devel@lists.freedesktop.org, Archit Taneja <architt@codeaurora.org>, Andrzej Hajda <a.hajda@samsung.com>, Laurent Pinchart <Laurent.pinchart@ideasonboard.com>, Thierry Reding <thierry.reding@gmail.com> Cc: linux-kernel@vger.kernel.org Subject: [PATCH v5 5/6] dt-bindings: Document the Raspberry Pi Touchscreen nodes. Date: Tue, 18 Jul 2017 14:05:09 -0700 [thread overview] Message-ID: <20170718210510.12229-5-eric@anholt.net> (raw) In-Reply-To: <20170718210510.12229-1-eric@anholt.net> This doesn't yet cover input, but the driver does get the display working when the firmware is disabled from talking to our I2C lines. Signed-off-by: Eric Anholt <eric@anholt.net> Acked-by: Rob Herring <robh@kernel.org> --- .../panel/raspberrypi,7inch-touchscreen.txt | 49 ++++++++++++++++++++++ 1 file changed, 49 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt diff --git a/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt new file mode 100644 index 000000000000..e9e19c059260 --- /dev/null +++ b/Documentation/devicetree/bindings/display/panel/raspberrypi,7inch-touchscreen.txt @@ -0,0 +1,49 @@ +This binding covers the official 7" (800x480) Raspberry Pi touchscreen +panel. + +This DSI panel contains: + +- TC358762 DSI->DPI bridge +- Atmel microcontroller on I2C for power sequencing the DSI bridge and + controlling backlight +- Touchscreen controller on I2C for touch input + +and this binding covers the DSI display parts but not its touch input. + +Required properties: +- compatible: Must be "raspberrypi,7inch-touchscreen-panel" +- reg: Must be "45" +- port: See panel-common.txt + +Example: + +dsi1: dsi@7e700000 { + #address-cells = <1>; + #size-cells = <0>; + <...> + + port { + dsi_out_port: endpoint { + remote-endpoint = <&panel_dsi_port>; + }; + }; +}; + +i2c_dsi: i2c { + compatible = "i2c-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpio 28 0 + &gpio 29 0>; + + lcd@45 { + compatible = "raspberrypi,7inch-touchscreen-panel"; + reg = <0x45>; + + port { + panel_dsi_port: endpoint { + remote-endpoint = <&dsi_out_port>; + }; + }; + }; +}; -- 2.11.0 _______________________________________________ dri-devel mailing list dri-devel@lists.freedesktop.org https://lists.freedesktop.org/mailman/listinfo/dri-devel
next prev parent reply other threads:[~2017-07-18 21:06 UTC|newest] Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-07-18 21:05 [PATCH v5 1/6] drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math Eric Anholt 2017-07-18 21:05 ` Eric Anholt 2017-07-18 21:05 ` [PATCH v5 2/6] drm/bridge: Add a devm_ allocator for panel bridge Eric Anholt 2017-07-18 21:05 ` Eric Anholt 2017-07-19 8:58 ` Philippe CORNU 2017-07-19 8:58 ` Philippe CORNU 2017-07-26 22:43 ` Eric Anholt 2017-07-26 22:43 ` Eric Anholt 2017-08-04 13:46 ` Laurent Pinchart 2017-08-04 14:57 ` Laurent Pinchart 2017-08-04 20:43 ` Eric Anholt 2017-08-04 21:25 ` Laurent Pinchart 2017-08-04 22:19 ` Ilia Mirkin 2017-08-04 22:19 ` Ilia Mirkin 2017-08-05 10:59 ` Noralf Trønnes 2017-08-05 10:59 ` Noralf Trønnes 2017-08-05 14:47 ` Noralf Trønnes 2017-08-07 9:25 ` Daniel Vetter 2017-08-07 9:25 ` Daniel Vetter 2017-08-07 10:22 ` Laurent Pinchart 2017-08-07 10:22 ` Laurent Pinchart 2017-08-07 14:37 ` Noralf Trønnes 2017-08-07 14:59 ` Daniel Vetter 2017-08-07 14:59 ` Daniel Vetter 2017-08-07 21:54 ` Laurent Pinchart 2017-08-07 21:54 ` Laurent Pinchart 2017-07-18 21:05 ` [PATCH v5 3/6] drm/vc4: Delay DSI host registration until the panel has probed Eric Anholt 2017-07-18 21:05 ` Eric Anholt 2017-08-04 9:04 ` Boris Brezillon 2017-07-18 21:05 ` [PATCH v5 4/6] drm: Allow DSI devices to be registered before the host registers Eric Anholt 2017-07-18 21:05 ` Eric Anholt 2017-07-19 20:31 ` Eric Anholt 2017-07-19 20:31 ` Eric Anholt 2017-07-18 21:05 ` Eric Anholt [this message] 2017-07-18 21:05 ` [PATCH v5 5/6] dt-bindings: Document the Raspberry Pi Touchscreen nodes Eric Anholt 2017-07-18 21:05 ` [PATCH v5 6/6] drm/panel: Add support for the Raspberry Pi 7" Touchscreen Eric Anholt 2017-07-18 21:05 ` Eric Anholt 2017-08-04 8:53 ` [PATCH v5 1/6] drm/vc4: Avoid using vrefresh==0 mode in DSI htotal math Boris Brezillon 2017-08-04 21:15 ` Eric Anholt 2017-08-04 21:15 ` Eric Anholt 2017-08-09 14:42 ` Boris Brezillon 2017-08-09 14:42 ` Boris Brezillon
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170718210510.12229-5-eric@anholt.net \ --to=eric@anholt.net \ --cc=Laurent.pinchart@ideasonboard.com \ --cc=a.hajda@samsung.com \ --cc=architt@codeaurora.org \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.