[PATCH 1/9] drm/i915: Nuke legacy flip queueing code

[Daniel Vetter <daniel.vetter@ffwll.ch>]

Just a very minimal patch to nuke that code. Lots of the flip
interrupt handling stuff is still around.

Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
---
 drivers/gpu/drm/i915/i915_drv.h      |   5 -
 drivers/gpu/drm/i915/intel_display.c | 656 -----------------------------------
 2 files changed, 661 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index f66c78d3a0a2..07e98b07c5bc 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -715,11 +715,6 @@ struct drm_i915_display_funcs {
 	void (*fdi_link_train)(struct intel_crtc *crtc,
 			       const struct intel_crtc_state *crtc_state);
 	void (*init_clock_gating)(struct drm_i915_private *dev_priv);
-	int (*queue_flip)(struct drm_device *dev, struct drm_crtc *crtc,
-			  struct drm_framebuffer *fb,
-			  struct drm_i915_gem_object *obj,
-			  struct drm_i915_gem_request *req,
-			  uint32_t flags);
 	void (*hpd_irq_setup)(struct drm_i915_private *dev_priv);
 	/* clock updates for mode set */
 	/* cursor updates */
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index 74b0ea1badc3..3349ca947173 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -2664,20 +2664,6 @@ intel_alloc_initial_plane_obj(struct intel_crtc *crtc,
 	return false;
 }
 
-/* Update plane->state->fb to match plane->fb after driver-internal updates */
-static void
-update_state_fb(struct drm_plane *plane)
-{
-	if (plane->fb == plane->state->fb)
-		return;
-
-	if (plane->state->fb)
-		drm_framebuffer_unreference(plane->state->fb);
-	plane->state->fb = plane->fb;
-	if (plane->state->fb)
-		drm_framebuffer_reference(plane->state->fb);
-}
-
 static void
 intel_set_plane_visible(struct intel_crtc_state *crtc_state,
 			struct intel_plane_state *plane_state,
@@ -10163,35 +10149,6 @@ static void intel_crtc_destroy(struct drm_crtc *crtc)
 	kfree(intel_crtc);
 }
 
-static void intel_unpin_work_fn(struct work_struct *__work)
-{
-	struct intel_flip_work *work =
-		container_of(__work, struct intel_flip_work, unpin_work);
-	struct intel_crtc *crtc = to_intel_crtc(work->crtc);
-	struct drm_device *dev = crtc->base.dev;
-	struct drm_plane *primary = crtc->base.primary;
-
-	if (is_mmio_work(work))
-		flush_work(&work->mmio_work);
-
-	mutex_lock(&dev->struct_mutex);
-	intel_unpin_fb_vma(work->old_vma);
-	i915_gem_object_put(work->pending_flip_obj);
-	mutex_unlock(&dev->struct_mutex);
-
-	i915_gem_request_put(work->flip_queued_req);
-
-	intel_frontbuffer_flip_complete(to_i915(dev),
-					to_intel_plane(primary)->frontbuffer_bit);
-	intel_fbc_post_update(crtc);
-	drm_framebuffer_unreference(work->old_fb);
-
-	BUG_ON(atomic_read(&crtc->unpin_work_count) == 0);
-	atomic_dec(&crtc->unpin_work_count);
-
-	kfree(work);
-}
-
 /* Is 'a' after or equal to 'b'? */
 static bool g4x_flip_count_after_eq(u32 a, u32 b)
 {
@@ -10336,346 +10293,6 @@ static inline void intel_mark_page_flip_active(struct intel_crtc *crtc,
 	atomic_set(&work->pending, 1);
 }
 
-static int intel_gen2_queue_flip(struct drm_device *dev,
-				 struct drm_crtc *crtc,
-				 struct drm_framebuffer *fb,
-				 struct drm_i915_gem_object *obj,
-				 struct drm_i915_gem_request *req,
-				 uint32_t flags)
-{
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	u32 flip_mask, *cs;
-
-	cs = intel_ring_begin(req, 6);
-	if (IS_ERR(cs))
-		return PTR_ERR(cs);
-
-	/* Can't queue multiple flips, so wait for the previous
-	 * one to finish before executing the next.
-	 */
-	if (intel_crtc->plane)
-		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
-	else
-		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
-	*cs++ = MI_WAIT_FOR_EVENT | flip_mask;
-	*cs++ = MI_NOOP;
-	*cs++ = MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane);
-	*cs++ = fb->pitches[0];
-	*cs++ = intel_crtc->flip_work->gtt_offset;
-	*cs++ = 0; /* aux display base address, unused */
-
-	return 0;
-}
-
-static int intel_gen3_queue_flip(struct drm_device *dev,
-				 struct drm_crtc *crtc,
-				 struct drm_framebuffer *fb,
-				 struct drm_i915_gem_object *obj,
-				 struct drm_i915_gem_request *req,
-				 uint32_t flags)
-{
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	u32 flip_mask, *cs;
-
-	cs = intel_ring_begin(req, 6);
-	if (IS_ERR(cs))
-		return PTR_ERR(cs);
-
-	if (intel_crtc->plane)
-		flip_mask = MI_WAIT_FOR_PLANE_B_FLIP;
-	else
-		flip_mask = MI_WAIT_FOR_PLANE_A_FLIP;
-	*cs++ = MI_WAIT_FOR_EVENT | flip_mask;
-	*cs++ = MI_NOOP;
-	*cs++ = MI_DISPLAY_FLIP_I915 | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane);
-	*cs++ = fb->pitches[0];
-	*cs++ = intel_crtc->flip_work->gtt_offset;
-	*cs++ = MI_NOOP;
-
-	return 0;
-}
-
-static int intel_gen4_queue_flip(struct drm_device *dev,
-				 struct drm_crtc *crtc,
-				 struct drm_framebuffer *fb,
-				 struct drm_i915_gem_object *obj,
-				 struct drm_i915_gem_request *req,
-				 uint32_t flags)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	u32 pf, pipesrc, *cs;
-
-	cs = intel_ring_begin(req, 4);
-	if (IS_ERR(cs))
-		return PTR_ERR(cs);
-
-	/* i965+ uses the linear or tiled offsets from the
-	 * Display Registers (which do not change across a page-flip)
-	 * so we need only reprogram the base address.
-	 */
-	*cs++ = MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane);
-	*cs++ = fb->pitches[0];
-	*cs++ = intel_crtc->flip_work->gtt_offset |
-		intel_fb_modifier_to_tiling(fb->modifier);
-
-	/* XXX Enabling the panel-fitter across page-flip is so far
-	 * untested on non-native modes, so ignore it for now.
-	 * pf = I915_READ(pipe == 0 ? PFA_CTL_1 : PFB_CTL_1) & PF_ENABLE;
-	 */
-	pf = 0;
-	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
-	*cs++ = pf | pipesrc;
-
-	return 0;
-}
-
-static int intel_gen6_queue_flip(struct drm_device *dev,
-				 struct drm_crtc *crtc,
-				 struct drm_framebuffer *fb,
-				 struct drm_i915_gem_object *obj,
-				 struct drm_i915_gem_request *req,
-				 uint32_t flags)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	u32 pf, pipesrc, *cs;
-
-	cs = intel_ring_begin(req, 4);
-	if (IS_ERR(cs))
-		return PTR_ERR(cs);
-
-	*cs++ = MI_DISPLAY_FLIP | MI_DISPLAY_FLIP_PLANE(intel_crtc->plane);
-	*cs++ = fb->pitches[0] | intel_fb_modifier_to_tiling(fb->modifier);
-	*cs++ = intel_crtc->flip_work->gtt_offset;
-
-	/* Contrary to the suggestions in the documentation,
-	 * "Enable Panel Fitter" does not seem to be required when page
-	 * flipping with a non-native mode, and worse causes a normal
-	 * modeset to fail.
-	 * pf = I915_READ(PF_CTL(intel_crtc->pipe)) & PF_ENABLE;
-	 */
-	pf = 0;
-	pipesrc = I915_READ(PIPESRC(intel_crtc->pipe)) & 0x0fff0fff;
-	*cs++ = pf | pipesrc;
-
-	return 0;
-}
-
-static int intel_gen7_queue_flip(struct drm_device *dev,
-				 struct drm_crtc *crtc,
-				 struct drm_framebuffer *fb,
-				 struct drm_i915_gem_object *obj,
-				 struct drm_i915_gem_request *req,
-				 uint32_t flags)
-{
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	u32 *cs, plane_bit = 0;
-	int len, ret;
-
-	switch (intel_crtc->plane) {
-	case PLANE_A:
-		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_A;
-		break;
-	case PLANE_B:
-		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_B;
-		break;
-	case PLANE_C:
-		plane_bit = MI_DISPLAY_FLIP_IVB_PLANE_C;
-		break;
-	default:
-		WARN_ONCE(1, "unknown plane in flip command\n");
-		return -ENODEV;
-	}
-
-	len = 4;
-	if (req->engine->id == RCS) {
-		len += 6;
-		/*
-		 * On Gen 8, SRM is now taking an extra dword to accommodate
-		 * 48bits addresses, and we need a NOOP for the batch size to
-		 * stay even.
-		 */
-		if (IS_GEN8(dev_priv))
-			len += 2;
-	}
-
-	/*
-	 * BSpec MI_DISPLAY_FLIP for IVB:
-	 * "The full packet must be contained within the same cache line."
-	 *
-	 * Currently the LRI+SRM+MI_DISPLAY_FLIP all fit within the same
-	 * cacheline, if we ever start emitting more commands before
-	 * the MI_DISPLAY_FLIP we may need to first emit everything else,
-	 * then do the cacheline alignment, and finally emit the
-	 * MI_DISPLAY_FLIP.
-	 */
-	ret = intel_ring_cacheline_align(req);
-	if (ret)
-		return ret;
-
-	cs = intel_ring_begin(req, len);
-	if (IS_ERR(cs))
-		return PTR_ERR(cs);
-
-	/* Unmask the flip-done completion message. Note that the bspec says that
-	 * we should do this for both the BCS and RCS, and that we must not unmask
-	 * more than one flip event at any time (or ensure that one flip message
-	 * can be sent by waiting for flip-done prior to queueing new flips).
-	 * Experimentation says that BCS works despite DERRMR masking all
-	 * flip-done completion events and that unmasking all planes at once
-	 * for the RCS also doesn't appear to drop events. Setting the DERRMR
-	 * to zero does lead to lockups within MI_DISPLAY_FLIP.
-	 */
-	if (req->engine->id == RCS) {
-		*cs++ = MI_LOAD_REGISTER_IMM(1);
-		*cs++ = i915_mmio_reg_offset(DERRMR);
-		*cs++ = ~(DERRMR_PIPEA_PRI_FLIP_DONE |
-			  DERRMR_PIPEB_PRI_FLIP_DONE |
-			  DERRMR_PIPEC_PRI_FLIP_DONE);
-		if (IS_GEN8(dev_priv))
-			*cs++ = MI_STORE_REGISTER_MEM_GEN8 |
-				MI_SRM_LRM_GLOBAL_GTT;
-		else
-			*cs++ = MI_STORE_REGISTER_MEM | MI_SRM_LRM_GLOBAL_GTT;
-		*cs++ = i915_mmio_reg_offset(DERRMR);
-		*cs++ = i915_ggtt_offset(req->engine->scratch) + 256;
-		if (IS_GEN8(dev_priv)) {
-			*cs++ = 0;
-			*cs++ = MI_NOOP;
-		}
-	}
-
-	*cs++ = MI_DISPLAY_FLIP_I915 | plane_bit;
-	*cs++ = fb->pitches[0] | intel_fb_modifier_to_tiling(fb->modifier);
-	*cs++ = intel_crtc->flip_work->gtt_offset;
-	*cs++ = MI_NOOP;
-
-	return 0;
-}
-
-static bool use_mmio_flip(struct intel_engine_cs *engine,
-			  struct drm_i915_gem_object *obj)
-{
-	/*
-	 * This is not being used for older platforms, because
-	 * non-availability of flip done interrupt forces us to use
-	 * CS flips. Older platforms derive flip done using some clever
-	 * tricks involving the flip_pending status bits and vblank irqs.
-	 * So using MMIO flips there would disrupt this mechanism.
-	 */
-
-	if (engine == NULL)
-		return true;
-
-	if (INTEL_GEN(engine->i915) < 5)
-		return false;
-
-	if (i915.use_mmio_flip < 0)
-		return false;
-	else if (i915.use_mmio_flip > 0)
-		return true;
-	else if (i915.enable_execlists)
-		return true;
-
-	return engine != i915_gem_object_last_write_engine(obj);
-}
-
-static void skl_do_mmio_flip(struct intel_crtc *intel_crtc,
-			     unsigned int rotation,
-			     struct intel_flip_work *work)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
-	const enum pipe pipe = intel_crtc->pipe;
-	u32 ctl, stride = skl_plane_stride(fb, 0, rotation);
-
-	ctl = I915_READ(PLANE_CTL(pipe, 0));
-	ctl &= ~PLANE_CTL_TILED_MASK;
-	switch (fb->modifier) {
-	case DRM_FORMAT_MOD_LINEAR:
-		break;
-	case I915_FORMAT_MOD_X_TILED:
-		ctl |= PLANE_CTL_TILED_X;
-		break;
-	case I915_FORMAT_MOD_Y_TILED:
-		ctl |= PLANE_CTL_TILED_Y;
-		break;
-	case I915_FORMAT_MOD_Yf_TILED:
-		ctl |= PLANE_CTL_TILED_YF;
-		break;
-	default:
-		MISSING_CASE(fb->modifier);
-	}
-
-	/*
-	 * Both PLANE_CTL and PLANE_STRIDE are not updated on vblank but on
-	 * PLANE_SURF updates, the update is then guaranteed to be atomic.
-	 */
-	I915_WRITE(PLANE_CTL(pipe, 0), ctl);
-	I915_WRITE(PLANE_STRIDE(pipe, 0), stride);
-
-	I915_WRITE(PLANE_SURF(pipe, 0), work->gtt_offset);
-	POSTING_READ(PLANE_SURF(pipe, 0));
-}
-
-static void ilk_do_mmio_flip(struct intel_crtc *intel_crtc,
-			     struct intel_flip_work *work)
-{
-	struct drm_device *dev = intel_crtc->base.dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct drm_framebuffer *fb = intel_crtc->base.primary->fb;
-	i915_reg_t reg = DSPCNTR(intel_crtc->plane);
-	u32 dspcntr;
-
-	dspcntr = I915_READ(reg);
-
-	if (fb->modifier == I915_FORMAT_MOD_X_TILED)
-		dspcntr |= DISPPLANE_TILED;
-	else
-		dspcntr &= ~DISPPLANE_TILED;
-
-	I915_WRITE(reg, dspcntr);
-
-	I915_WRITE(DSPSURF(intel_crtc->plane), work->gtt_offset);
-	POSTING_READ(DSPSURF(intel_crtc->plane));
-}
-
-static void intel_mmio_flip_work_func(struct work_struct *w)
-{
-	struct intel_flip_work *work =
-		container_of(w, struct intel_flip_work, mmio_work);
-	struct intel_crtc *crtc = to_intel_crtc(work->crtc);
-	struct drm_i915_private *dev_priv = to_i915(crtc->base.dev);
-	struct intel_framebuffer *intel_fb =
-		to_intel_framebuffer(crtc->base.primary->fb);
-	struct drm_i915_gem_object *obj = intel_fb->obj;
-
-	WARN_ON(i915_gem_object_wait(obj, 0, MAX_SCHEDULE_TIMEOUT, NULL) < 0);
-
-	intel_pipe_update_start(crtc);
-
-	if (INTEL_GEN(dev_priv) >= 9)
-		skl_do_mmio_flip(crtc, work->rotation, work);
-	else
-		/* use_mmio_flip() retricts MMIO flips to ilk+ */
-		ilk_do_mmio_flip(crtc, work);
-
-	intel_pipe_update_end(crtc, work);
-}
-
-static int intel_default_queue_flip(struct drm_device *dev,
-				    struct drm_crtc *crtc,
-				    struct drm_framebuffer *fb,
-				    struct drm_i915_gem_object *obj,
-				    struct drm_i915_gem_request *req,
-				    uint32_t flags)
-{
-	return -ENODEV;
-}
-
 static bool __pageflip_stall_check_cs(struct drm_i915_private *dev_priv,
 				      struct intel_crtc *intel_crtc,
 				      struct intel_flip_work *work)
@@ -10742,251 +10359,6 @@ void intel_check_page_flip(struct drm_i915_private *dev_priv, int pipe)
 	spin_unlock(&dev->event_lock);
 }
 
-__maybe_unused
-static int intel_crtc_page_flip(struct drm_crtc *crtc,
-				struct drm_framebuffer *fb,
-				struct drm_pending_vblank_event *event,
-				uint32_t page_flip_flags)
-{
-	struct drm_device *dev = crtc->dev;
-	struct drm_i915_private *dev_priv = to_i915(dev);
-	struct drm_framebuffer *old_fb = crtc->primary->fb;
-	struct drm_i915_gem_object *obj = intel_fb_obj(fb);
-	struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
-	struct drm_plane *primary = crtc->primary;
-	enum pipe pipe = intel_crtc->pipe;
-	struct intel_flip_work *work;
-	struct intel_engine_cs *engine;
-	bool mmio_flip;
-	struct drm_i915_gem_request *request;
-	struct i915_vma *vma;
-	int ret;
-
-	/*
-	 * drm_mode_page_flip_ioctl() should already catch this, but double
-	 * check to be safe.  In the future we may enable pageflipping from
-	 * a disabled primary plane.
-	 */
-	if (WARN_ON(intel_fb_obj(old_fb) == NULL))
-		return -EBUSY;
-
-	/* Can't change pixel format via MI display flips. */
-	if (fb->format != crtc->primary->fb->format)
-		return -EINVAL;
-
-	/*
-	 * TILEOFF/LINOFF registers can't be changed via MI display flips.
-	 * Note that pitch changes could also affect these register.
-	 */
-	if (INTEL_GEN(dev_priv) > 3 &&
-	    (fb->offsets[0] != crtc->primary->fb->offsets[0] ||
-	     fb->pitches[0] != crtc->primary->fb->pitches[0]))
-		return -EINVAL;
-
-	if (i915_terminally_wedged(&dev_priv->gpu_error))
-		goto out_hang;
-
-	work = kzalloc(sizeof(*work), GFP_KERNEL);
-	if (work == NULL)
-		return -ENOMEM;
-
-	work->event = event;
-	work->crtc = crtc;
-	work->old_fb = old_fb;
-	INIT_WORK(&work->unpin_work, intel_unpin_work_fn);
-
-	ret = drm_crtc_vblank_get(crtc);
-	if (ret)
-		goto free_work;
-
-	/* We borrow the event spin lock for protecting flip_work */
-	spin_lock_irq(&dev->event_lock);
-	if (intel_crtc->flip_work) {
-		/* Before declaring the flip queue wedged, check if
-		 * the hardware completed the operation behind our backs.
-		 */
-		if (pageflip_finished(intel_crtc, intel_crtc->flip_work)) {
-			DRM_DEBUG_DRIVER("flip queue: previous flip completed, continuing\n");
-			page_flip_completed(intel_crtc);
-		} else {
-			DRM_DEBUG_DRIVER("flip queue: crtc already busy\n");
-			spin_unlock_irq(&dev->event_lock);
-
-			drm_crtc_vblank_put(crtc);
-			kfree(work);
-			return -EBUSY;
-		}
-	}
-	intel_crtc->flip_work = work;
-	spin_unlock_irq(&dev->event_lock);
-
-	if (atomic_read(&intel_crtc->unpin_work_count) >= 2)
-		flush_workqueue(dev_priv->wq);
-
-	/* Reference the objects for the scheduled work. */
-	drm_framebuffer_reference(work->old_fb);
-
-	crtc->primary->fb = fb;
-	update_state_fb(crtc->primary);
-
-	work->pending_flip_obj = i915_gem_object_get(obj);
-
-	ret = i915_mutex_lock_interruptible(dev);
-	if (ret)
-		goto cleanup;
-
-	intel_crtc->reset_count = i915_reset_count(&dev_priv->gpu_error);
-	if (i915_reset_backoff_or_wedged(&dev_priv->gpu_error)) {
-		ret = -EIO;
-		goto unlock;
-	}
-
-	atomic_inc(&intel_crtc->unpin_work_count);
-
-	if (INTEL_GEN(dev_priv) >= 5 || IS_G4X(dev_priv))
-		work->flip_count = I915_READ(PIPE_FLIPCOUNT_G4X(pipe)) + 1;
-
-	if (IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
-		engine = dev_priv->engine[BCS];
-		if (fb->modifier != old_fb->modifier)
-			/* vlv: DISPLAY_FLIP fails to change tiling */
-			engine = NULL;
-	} else if (IS_IVYBRIDGE(dev_priv) || IS_HASWELL(dev_priv)) {
-		engine = dev_priv->engine[BCS];
-	} else if (INTEL_GEN(dev_priv) >= 7) {
-		engine = i915_gem_object_last_write_engine(obj);
-		if (engine == NULL || engine->id != RCS)
-			engine = dev_priv->engine[BCS];
-	} else {
-		engine = dev_priv->engine[RCS];
-	}
-
-	mmio_flip = use_mmio_flip(engine, obj);
-
-	vma = intel_pin_and_fence_fb_obj(fb, primary->state->rotation);
-	if (IS_ERR(vma)) {
-		ret = PTR_ERR(vma);
-		goto cleanup_pending;
-	}
-
-	work->old_vma = to_intel_plane_state(primary->state)->vma;
-	to_intel_plane_state(primary->state)->vma = vma;
-
-	work->gtt_offset = i915_ggtt_offset(vma) + intel_crtc->dspaddr_offset;
-	work->rotation = crtc->primary->state->rotation;
-
-	/*
-	 * There's the potential that the next frame will not be compatible with
-	 * FBC, so we want to call pre_update() before the actual page flip.
-	 * The problem is that pre_update() caches some information about the fb
-	 * object, so we want to do this only after the object is pinned. Let's
-	 * be on the safe side and do this immediately before scheduling the
-	 * flip.
-	 */
-	intel_fbc_pre_update(intel_crtc, intel_crtc->config,
-			     to_intel_plane_state(primary->state));
-
-	if (mmio_flip) {
-		INIT_WORK(&work->mmio_work, intel_mmio_flip_work_func);
-		queue_work(system_unbound_wq, &work->mmio_work);
-	} else {
-		request = i915_gem_request_alloc(engine,
-						 dev_priv->kernel_context);
-		if (IS_ERR(request)) {
-			ret = PTR_ERR(request);
-			goto cleanup_unpin;
-		}
-
-		ret = i915_gem_request_await_object(request, obj, false);
-		if (ret)
-			goto cleanup_request;
-
-		ret = dev_priv->display.queue_flip(dev, crtc, fb, obj, request,
-						   page_flip_flags);
-		if (ret)
-			goto cleanup_request;
-
-		intel_mark_page_flip_active(intel_crtc, work);
-
-		work->flip_queued_req = i915_gem_request_get(request);
-		i915_add_request(request);
-	}
-
-	i915_gem_object_wait_priority(obj, 0, I915_PRIORITY_DISPLAY);
-	i915_gem_track_fb(intel_fb_obj(old_fb), obj,
-			  to_intel_plane(primary)->frontbuffer_bit);
-	mutex_unlock(&dev->struct_mutex);
-
-	intel_frontbuffer_flip_prepare(to_i915(dev),
-				       to_intel_plane(primary)->frontbuffer_bit);
-
-	trace_i915_flip_request(intel_crtc->plane, obj);
-
-	return 0;
-
-cleanup_request:
-	i915_add_request(request);
-cleanup_unpin:
-	to_intel_plane_state(primary->state)->vma = work->old_vma;
-	intel_unpin_fb_vma(vma);
-cleanup_pending:
-	atomic_dec(&intel_crtc->unpin_work_count);
-unlock:
-	mutex_unlock(&dev->struct_mutex);
-cleanup:
-	crtc->primary->fb = old_fb;
-	update_state_fb(crtc->primary);
-
-	i915_gem_object_put(obj);
-	drm_framebuffer_unreference(work->old_fb);
-
-	spin_lock_irq(&dev->event_lock);
-	intel_crtc->flip_work = NULL;
-	spin_unlock_irq(&dev->event_lock);
-
-	drm_crtc_vblank_put(crtc);
-free_work:
-	kfree(work);
-
-	if (ret == -EIO) {
-		struct drm_atomic_state *state;
-		struct drm_plane_state *plane_state;
-
-out_hang:
-		state = drm_atomic_state_alloc(dev);
-		if (!state)
-			return -ENOMEM;
-		state->acquire_ctx = dev->mode_config.acquire_ctx;
-
-retry:
-		plane_state = drm_atomic_get_plane_state(state, primary);
-		ret = PTR_ERR_OR_ZERO(plane_state);
-		if (!ret) {
-			drm_atomic_set_fb_for_plane(plane_state, fb);
-
-			ret = drm_atomic_set_crtc_for_plane(plane_state, crtc);
-			if (!ret)
-				ret = drm_atomic_commit(state);
-		}
-
-		if (ret == -EDEADLK) {
-			drm_modeset_backoff(state->acquire_ctx);
-			drm_atomic_state_clear(state);
-			goto retry;
-		}
-
-		drm_atomic_state_put(state);
-
-		if (ret == 0 && event) {
-			spin_lock_irq(&dev->event_lock);
-			drm_crtc_send_vblank_event(crtc, event);
-			spin_unlock_irq(&dev->event_lock);
-		}
-	}
-	return ret;
-}
-
-
 /**
  * intel_wm_need_update - Check whether watermarks need updating
  * @plane: drm plane
@@ -14736,34 +14108,6 @@ void intel_init_display_hooks(struct drm_i915_private *dev_priv)
 		dev_priv->display.update_crtcs = skl_update_crtcs;
 	else
 		dev_priv->display.update_crtcs = intel_update_crtcs;
-
-	switch (INTEL_INFO(dev_priv)->gen) {
-	case 2:
-		dev_priv->display.queue_flip = intel_gen2_queue_flip;
-		break;
-
-	case 3:
-		dev_priv->display.queue_flip = intel_gen3_queue_flip;
-		break;
-
-	case 4:
-	case 5:
-		dev_priv->display.queue_flip = intel_gen4_queue_flip;
-		break;
-
-	case 6:
-		dev_priv->display.queue_flip = intel_gen6_queue_flip;
-		break;
-	case 7:
-	case 8: /* FIXME(BDW): Check that the gen8 RCS flip works. */
-		dev_priv->display.queue_flip = intel_gen7_queue_flip;
-		break;
-	case 9:
-		/* Drop through - unsupported since execlist only. */
-	default:
-		/* Default just returns -ENODEV to indicate unsupported */
-		dev_priv->display.queue_flip = intel_default_queue_flip;
-	}
 }
 
 /*
-- 
2.13.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx