All of lore.kernel.org
 help / color / mirror / Atom feed
From: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
To: Mark Brown <broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	Jan Kiszka <jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org>,
	Mika Westerberg
	<mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Cc: Andy Shevchenko
	<andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
Subject: [PATCH v2] spi: pxa2xx: Revert "Only claim CS GPIOs when the slave device is created"
Date: Thu, 27 Jul 2017 14:37:08 +0300	[thread overview]
Message-ID: <20170727113708.87214-1-andriy.shevchenko@linux.intel.com> (raw)

There is a valid case to call setup() following by setup_cs() several
times for the same chip.

With the commit

  676a4e3bab44 ("spi: pxa2xx: Only claim CS GPIOs when the slave device is created")

it is not possible anymore due to GPIO line being requested already
during the first call to setup_cs().

For now, revert the commit to make things work again.

Signed-off-by: Andy Shevchenko <andriy.shevchenko-VuQAYsv1563Yd54FQh9/CA@public.gmane.org>
---
- rephrase subject line to follow subsystem's pattern

 drivers/spi/spi-pxa2xx.c | 59 +++++++++++++++++++++++++++++++-----------------
 1 file changed, 38 insertions(+), 21 deletions(-)

diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index be991266a6ce..38d053682892 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -1213,33 +1213,21 @@ static int setup_cs(struct spi_device *spi, struct chip_data *chip,
 		    struct pxa2xx_spi_chip *chip_info)
 {
 	struct driver_data *drv_data = spi_master_get_devdata(spi->master);
-	struct device *pdev = &drv_data->pdev->dev;
-	struct gpio_desc *gpiod;
 	int err = 0;
-	int count;
 
 	if (chip == NULL)
 		return 0;
 
-	count = gpiod_count(pdev, "cs");
-	if (count > 0) {
-		if (spi->chip_select >= count)
-			return -EINVAL;
-
-		gpiod = gpiod_get_index(pdev, "cs", spi->chip_select,
-					GPIOD_OUT_HIGH);
-		if (IS_ERR(gpiod)) {
-			/* Means use native chip select */
-			if (PTR_ERR(gpiod) == -ENOENT)
-				return 0;
+	if (drv_data->cs_gpiods) {
+		struct gpio_desc *gpiod;
 
-			return PTR_ERR(gpiod);
+		gpiod = drv_data->cs_gpiods[spi->chip_select];
+		if (gpiod) {
+			chip->gpio_cs = desc_to_gpio(gpiod);
+			chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
+			gpiod_set_value(gpiod, chip->gpio_cs_inverted);
 		}
 
-		chip->gpio_cs = desc_to_gpio(gpiod);
-		chip->gpio_cs_inverted = spi->mode & SPI_CS_HIGH;
-		gpiod_set_value(gpiod, chip->gpio_cs_inverted);
-
 		return 0;
 	}
 
@@ -1427,7 +1415,8 @@ static void cleanup(struct spi_device *spi)
 	if (!chip)
 		return;
 
-	if (drv_data->ssp_type != CE4100_SSP && gpio_is_valid(chip->gpio_cs))
+	if (drv_data->ssp_type != CE4100_SSP && !drv_data->cs_gpiods &&
+	    gpio_is_valid(chip->gpio_cs))
 		gpio_free(chip->gpio_cs);
 
 	kfree(chip);
@@ -1763,10 +1752,38 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
 	master->num_chipselect = platform_info->num_chipselect;
 
 	count = gpiod_count(&pdev->dev, "cs");
-	if (count > 0)
+	if (count > 0) {
+		int i;
+
 		master->num_chipselect = max_t(int, count,
 			master->num_chipselect);
 
+		drv_data->cs_gpiods = devm_kcalloc(&pdev->dev,
+			master->num_chipselect, sizeof(struct gpio_desc *),
+			GFP_KERNEL);
+		if (!drv_data->cs_gpiods) {
+			status = -ENOMEM;
+			goto out_error_clock_enabled;
+		}
+
+		for (i = 0; i < master->num_chipselect; i++) {
+			struct gpio_desc *gpiod;
+
+			gpiod = devm_gpiod_get_index(dev, "cs", i,
+						     GPIOD_OUT_HIGH);
+			if (IS_ERR(gpiod)) {
+				/* Means use native chip select */
+				if (PTR_ERR(gpiod) == -ENOENT)
+					continue;
+
+				status = (int)PTR_ERR(gpiod);
+				goto out_error_clock_enabled;
+			} else {
+				drv_data->cs_gpiods[i] = gpiod;
+			}
+		}
+	}
+
 	tasklet_init(&drv_data->pump_transfers, pump_transfers,
 		     (unsigned long)drv_data);
 
-- 
2.13.2

--
To unsubscribe from this list: send the line "unsubscribe linux-spi" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

                 reply	other threads:[~2017-07-27 11:37 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170727113708.87214-1-andriy.shevchenko@linux.intel.com \
    --to=andriy.shevchenko-vuqaysv1563yd54fqh9/ca@public.gmane.org \
    --cc=broonie-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    --cc=jan.kiszka-kv7WeFo6aLtBDgjK7y7TUQ@public.gmane.org \
    --cc=linux-spi-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=mika.westerberg-VuQAYsv1563Yd54FQh9/CA@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.