From: Linus Walleij <linus.walleij@linaro.org> To: "Rafael J . Wysocki" <rafael@kernel.org>, Viresh Kumar <viresh.kumar@linaro.org>, Lee Jones <lee.jones@linaro.org> Cc: linux-pm@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Arnd Bergmann <arnd@arndb.de>, Ulf Hansson <ulf.hansson@linaro.org>, Linus Walleij <linus.walleij@linaro.org> Subject: [PATCH 2/3 v3] mfd: db8500-prcmu: Get rid of cpufreq dependency Date: Tue, 22 Aug 2017 15:17:40 +0200 [thread overview] Message-ID: <20170822131741.23473-2-linus.walleij@linaro.org> (raw) In-Reply-To: <20170822131741.23473-1-linus.walleij@linaro.org> The ARMSS clock, also known as the operating point of the CPU, should not cross-depend on cpufreq like this. Move the code to use just frequencies and remove the false frequency (1GHz) and put in the actual frequency provided by the ARMSS clock (998400000 Hz) as part of the process. After this and the related cpufreq patch, the DB8500 will simply use the standard DT cpufreq driver to change the operating points through the common clock framework using the ARMSS clock. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Fixed freq table indentation so both checkpatch and Lee are happy. --- drivers/mfd/db8500-prcmu.c | 62 ++++++++++++++++------------------------------ 1 file changed, 21 insertions(+), 41 deletions(-) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 5c739ac752e8..5970b8def548 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -33,7 +33,6 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/db8500-prcmu.h> #include <linux/regulator/machine.h> -#include <linux/cpufreq.h> #include <linux/platform_data/ux500_wdt.h> #include <linux/platform_data/db8500_thermal.h> #include "dbx500-prcmu-regs.h" @@ -1692,32 +1691,27 @@ static long round_clock_rate(u8 clock, unsigned long rate) return rounded_rate; } -/* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ -static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .driver_data = ARM_EXTCLK,}, - { .frequency = 400000, .driver_data = ARM_50_OPP,}, - { .frequency = 800000, .driver_data = ARM_100_OPP,}, - { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ - { .frequency = CPUFREQ_TABLE_END,}, +static const unsigned long armss_freqs[] = { + 200000000, + 400000000, + 800000000, + 998400000 }; static long round_armss_rate(unsigned long rate) { - struct cpufreq_frequency_table *pos; - long freq = 0; - - /* cpufreq table frequencies is in KHz. */ - rate = rate / 1000; + unsigned long freq = 0; + int i; /* Find the corresponding arm opp from the cpufreq table. */ - cpufreq_for_each_entry(pos, db8500_cpufreq_table) { - freq = pos->frequency; - if (freq == rate) + for (i = 0; i < ARRAY_SIZE(armss_freqs); i++) { + freq = armss_freqs[i]; + if (rate <= freq) break; } /* Return the last valid value, even if a match was not found. */ - return freq * 1000; + return freq; } #define MIN_PLL_VCO_RATE 600000000ULL @@ -1854,21 +1848,23 @@ static void set_clock_rate(u8 clock, unsigned long rate) static int set_armss_rate(unsigned long rate) { - struct cpufreq_frequency_table *pos; - - /* cpufreq table frequencies is in KHz. */ - rate = rate / 1000; + unsigned long freq; + u8 opps[] = { ARM_EXTCLK, ARM_50_OPP, ARM_100_OPP, ARM_MAX_OPP }; + int i; /* Find the corresponding arm opp from the cpufreq table. */ - cpufreq_for_each_entry(pos, db8500_cpufreq_table) - if (pos->frequency == rate) + for (i = 0; i < ARRAY_SIZE(armss_freqs); i++) { + freq = armss_freqs[i]; + if (rate == freq) break; + } - if (pos->frequency != rate) + if (rate != freq) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(pos->driver_data); + pr_debug("SET ARM OPP 0x%02x\n", opps[i]); + return db8500_prcmu_set_arm_opp(opps[i]); } static int set_plldsi_rate(unsigned long rate) @@ -3049,12 +3045,6 @@ static const struct mfd_cell db8500_prcmu_devs[] = { .pdata_size = sizeof(db8500_regulators), }, { - .name = "cpufreq-ux500", - .of_compatible = "stericsson,cpufreq-ux500", - .platform_data = &db8500_cpufreq_table, - .pdata_size = sizeof(db8500_cpufreq_table), - }, - { .name = "cpuidle-dbx500", .of_compatible = "stericsson,cpuidle-dbx500", }, @@ -3067,14 +3057,6 @@ static const struct mfd_cell db8500_prcmu_devs[] = { }, }; -static void db8500_prcmu_update_cpufreq(void) -{ - if (prcmu_has_arm_maxopp()) { - db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; - } -} - static int db8500_prcmu_register_ab8500(struct device *parent) { struct device_node *np; @@ -3160,8 +3142,6 @@ static int db8500_prcmu_probe(struct platform_device *pdev) prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); - db8500_prcmu_update_cpufreq(); - err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs, ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain); if (err) { -- 2.13.5
WARNING: multiple messages have this Message-ID (diff)
From: linus.walleij@linaro.org (Linus Walleij) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 2/3 v3] mfd: db8500-prcmu: Get rid of cpufreq dependency Date: Tue, 22 Aug 2017 15:17:40 +0200 [thread overview] Message-ID: <20170822131741.23473-2-linus.walleij@linaro.org> (raw) In-Reply-To: <20170822131741.23473-1-linus.walleij@linaro.org> The ARMSS clock, also known as the operating point of the CPU, should not cross-depend on cpufreq like this. Move the code to use just frequencies and remove the false frequency (1GHz) and put in the actual frequency provided by the ARMSS clock (998400000 Hz) as part of the process. After this and the related cpufreq patch, the DB8500 will simply use the standard DT cpufreq driver to change the operating points through the common clock framework using the ARMSS clock. Acked-by: Lee Jones <lee.jones@linaro.org> Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- ChangeLog v2->v3: - Fixed freq table indentation so both checkpatch and Lee are happy. --- drivers/mfd/db8500-prcmu.c | 62 ++++++++++++++++------------------------------ 1 file changed, 21 insertions(+), 41 deletions(-) diff --git a/drivers/mfd/db8500-prcmu.c b/drivers/mfd/db8500-prcmu.c index 5c739ac752e8..5970b8def548 100644 --- a/drivers/mfd/db8500-prcmu.c +++ b/drivers/mfd/db8500-prcmu.c @@ -33,7 +33,6 @@ #include <linux/mfd/abx500/ab8500.h> #include <linux/regulator/db8500-prcmu.h> #include <linux/regulator/machine.h> -#include <linux/cpufreq.h> #include <linux/platform_data/ux500_wdt.h> #include <linux/platform_data/db8500_thermal.h> #include "dbx500-prcmu-regs.h" @@ -1692,32 +1691,27 @@ static long round_clock_rate(u8 clock, unsigned long rate) return rounded_rate; } -/* CPU FREQ table, may be changed due to if MAX_OPP is supported. */ -static struct cpufreq_frequency_table db8500_cpufreq_table[] = { - { .frequency = 200000, .driver_data = ARM_EXTCLK,}, - { .frequency = 400000, .driver_data = ARM_50_OPP,}, - { .frequency = 800000, .driver_data = ARM_100_OPP,}, - { .frequency = CPUFREQ_TABLE_END,}, /* To be used for MAX_OPP. */ - { .frequency = CPUFREQ_TABLE_END,}, +static const unsigned long armss_freqs[] = { + 200000000, + 400000000, + 800000000, + 998400000 }; static long round_armss_rate(unsigned long rate) { - struct cpufreq_frequency_table *pos; - long freq = 0; - - /* cpufreq table frequencies is in KHz. */ - rate = rate / 1000; + unsigned long freq = 0; + int i; /* Find the corresponding arm opp from the cpufreq table. */ - cpufreq_for_each_entry(pos, db8500_cpufreq_table) { - freq = pos->frequency; - if (freq == rate) + for (i = 0; i < ARRAY_SIZE(armss_freqs); i++) { + freq = armss_freqs[i]; + if (rate <= freq) break; } /* Return the last valid value, even if a match was not found. */ - return freq * 1000; + return freq; } #define MIN_PLL_VCO_RATE 600000000ULL @@ -1854,21 +1848,23 @@ static void set_clock_rate(u8 clock, unsigned long rate) static int set_armss_rate(unsigned long rate) { - struct cpufreq_frequency_table *pos; - - /* cpufreq table frequencies is in KHz. */ - rate = rate / 1000; + unsigned long freq; + u8 opps[] = { ARM_EXTCLK, ARM_50_OPP, ARM_100_OPP, ARM_MAX_OPP }; + int i; /* Find the corresponding arm opp from the cpufreq table. */ - cpufreq_for_each_entry(pos, db8500_cpufreq_table) - if (pos->frequency == rate) + for (i = 0; i < ARRAY_SIZE(armss_freqs); i++) { + freq = armss_freqs[i]; + if (rate == freq) break; + } - if (pos->frequency != rate) + if (rate != freq) return -EINVAL; /* Set the new arm opp. */ - return db8500_prcmu_set_arm_opp(pos->driver_data); + pr_debug("SET ARM OPP 0x%02x\n", opps[i]); + return db8500_prcmu_set_arm_opp(opps[i]); } static int set_plldsi_rate(unsigned long rate) @@ -3049,12 +3045,6 @@ static const struct mfd_cell db8500_prcmu_devs[] = { .pdata_size = sizeof(db8500_regulators), }, { - .name = "cpufreq-ux500", - .of_compatible = "stericsson,cpufreq-ux500", - .platform_data = &db8500_cpufreq_table, - .pdata_size = sizeof(db8500_cpufreq_table), - }, - { .name = "cpuidle-dbx500", .of_compatible = "stericsson,cpuidle-dbx500", }, @@ -3067,14 +3057,6 @@ static const struct mfd_cell db8500_prcmu_devs[] = { }, }; -static void db8500_prcmu_update_cpufreq(void) -{ - if (prcmu_has_arm_maxopp()) { - db8500_cpufreq_table[3].frequency = 1000000; - db8500_cpufreq_table[3].driver_data = ARM_MAX_OPP; - } -} - static int db8500_prcmu_register_ab8500(struct device *parent) { struct device_node *np; @@ -3160,8 +3142,6 @@ static int db8500_prcmu_probe(struct platform_device *pdev) prcmu_config_esram0_deep_sleep(ESRAM0_DEEP_SLEEP_STATE_RET); - db8500_prcmu_update_cpufreq(); - err = mfd_add_devices(&pdev->dev, 0, common_prcmu_devs, ARRAY_SIZE(common_prcmu_devs), NULL, 0, db8500_irq_domain); if (err) { -- 2.13.5
next prev parent reply other threads:[~2017-08-22 13:17 UTC|newest] Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-08-22 13:17 [PATCH 1/3 v3] cpufreq: enable the DT cpufreq driver on the Ux500 Linus Walleij 2017-08-22 13:17 ` Linus Walleij 2017-08-22 13:17 ` Linus Walleij [this message] 2017-08-22 13:17 ` [PATCH 2/3 v3] mfd: db8500-prcmu: Get rid of cpufreq dependency Linus Walleij 2017-08-22 13:25 ` Rafael J. Wysocki 2017-08-22 13:25 ` Rafael J. Wysocki 2017-08-22 13:44 ` Linus Walleij 2017-08-22 13:44 ` Linus Walleij 2017-08-22 13:43 ` Rafael J. Wysocki 2017-08-22 13:43 ` Rafael J. Wysocki 2017-08-22 13:17 ` [PATCH 3/3 v3] cpufreq: dbx500: Delete obsolete driver Linus Walleij 2017-08-22 13:17 ` Linus Walleij
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20170822131741.23473-2-linus.walleij@linaro.org \ --to=linus.walleij@linaro.org \ --cc=arnd@arndb.de \ --cc=lee.jones@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-pm@vger.kernel.org \ --cc=rafael@kernel.org \ --cc=ulf.hansson@linaro.org \ --cc=viresh.kumar@linaro.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.