All of lore.kernel.org
 help / color / mirror / Atom feed
From: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
To: ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org
Cc: devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: [PATCH] ARM: dts: keystone-k2g: Add McASP nodes
Date: Mon, 28 Aug 2017 10:19:57 +0300	[thread overview]
Message-ID: <20170828071957.9597-1-peter.ujfalusi@ti.com> (raw)

Add three McASP nodes present on 66AK2G device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi-l0cyMroinI0@public.gmane.org>
---
Hi Santosh,

There is no driver change dependency for McASP to work on 66AK2G, only the nodes
need to be in place.

Regards,
Peter

 arch/arm/boot/dts/keystone-k2g.dtsi | 48 +++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 826b286665e6..5fcd2c6da46d 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -343,5 +343,53 @@
 			clock-names = "fck", "mmchsdb_fck";
 			status = "disabled";
 		};
+
+		mcasp0: mcasp@02340000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02340000 0x2000>,
+			      <0x21804000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma0 24 1>, <&edma0 25 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x4>;
+			clocks = <&k2g_clks 0x4 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcasp1: mcasp@02342000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02342000 0x2000>,
+			      <0x21804400 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma1 48 1>, <&edma1 49 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x5>;
+			clocks = <&k2g_clks 0x5 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcasp2: mcasp@02344000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02344000 0x2000>,
+			      <0x21804800 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma1 50 1>, <&edma1 51 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x6>;
+			clocks = <&k2g_clks 0x6 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
 	};
 };
-- 
2.14.1


Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki


--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

WARNING: multiple messages have this Message-ID (diff)
From: peter.ujfalusi@ti.com (Peter Ujfalusi)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: keystone-k2g: Add McASP nodes
Date: Mon, 28 Aug 2017 10:19:57 +0300	[thread overview]
Message-ID: <20170828071957.9597-1-peter.ujfalusi@ti.com> (raw)

?Add three McASP nodes present on 66AK2G device.

Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com>
---
Hi Santosh,

There is no driver change dependency for McASP to work on 66AK2G, only the nodes
need to be in place.

Regards,
Peter

 arch/arm/boot/dts/keystone-k2g.dtsi | 48 +++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

diff --git a/arch/arm/boot/dts/keystone-k2g.dtsi b/arch/arm/boot/dts/keystone-k2g.dtsi
index 826b286665e6..5fcd2c6da46d 100644
--- a/arch/arm/boot/dts/keystone-k2g.dtsi
+++ b/arch/arm/boot/dts/keystone-k2g.dtsi
@@ -343,5 +343,53 @@
 			clock-names = "fck", "mmchsdb_fck";
 			status = "disabled";
 		};
+
+		mcasp0: mcasp at 02340000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02340000 0x2000>,
+			      <0x21804000 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma0 24 1>, <&edma0 25 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x4>;
+			clocks = <&k2g_clks 0x4 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcasp1: mcasp at 02342000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02342000 0x2000>,
+			      <0x21804400 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma1 48 1>, <&edma1 49 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x5>;
+			clocks = <&k2g_clks 0x5 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
+
+		mcasp2: mcasp at 02344000 {
+			compatible = "ti,am33xx-mcasp-audio";
+			reg = <0x02344000 0x2000>,
+			      <0x21804800 0x1000>;
+			reg-names = "mpu","dat";
+			interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>,
+				     <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+			interrupt-names = "tx", "rx";
+			dmas = <&edma1 50 1>, <&edma1 51 1>;
+			dma-names = "tx", "rx";
+			power-domains = <&k2g_pds 0x6>;
+			clocks = <&k2g_clks 0x6 0>;
+			clock-names = "fck";
+			status = "disabled";
+		};
 	};
 };
-- 
2.14.1


Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki

             reply	other threads:[~2017-08-28  7:19 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-08-28  7:19 Peter Ujfalusi [this message]
2017-08-28  7:19 ` [PATCH] ARM: dts: keystone-k2g: Add McASP nodes Peter Ujfalusi
     [not found] ` <20170828071957.9597-1-peter.ujfalusi-l0cyMroinI0@public.gmane.org>
2017-08-28 15:56   ` Santosh Shilimkar
2017-08-28 15:56     ` Santosh Shilimkar

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170828071957.9597-1-peter.ujfalusi@ti.com \
    --to=peter.ujfalusi-l0cymroini0@public.gmane.org \
    --cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
    --cc=linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org \
    --cc=ssantosh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.