From: Jacob Chen <jacob-chen@iotwrt.com> To: linux-rockchip@lists.infradead.org Cc: linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, heiko@sntech.de, robh+dt@kernel.org, mchehab@kernel.org, linux-media@vger.kernel.org, laurent.pinchart+renesas@ideasonboard.com, hans.verkuil@cisco.com, s.nawrocki@samsung.com, Jacob Chen <jacob-chen@iotwrt.com>, Yakir Yang <ykk@rock-chips.com> Subject: [PATCH v10 2/4] ARM: dts: rockchip: add RGA device node for RK3288 Date: Tue, 3 Oct 2017 17:28:37 +0800 [thread overview] Message-ID: <20171003092839.26236-3-jacob-chen@iotwrt.com> (raw) In-Reply-To: <20171003092839.26236-1-jacob-chen@iotwrt.com> This patch add the RGA dt config of rk3288 SoC. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> --- arch/arm/boot/dts/rk3288.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index a0a0b08bff74..8c6dfc0abc42 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -972,6 +972,17 @@ status = "disabled"; }; + rga: rga@ff920000 { + compatible = "rockchip,rk3288-rga"; + reg = <0x0 0xff920000 0x0 0x180>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; + clock-names = "aclk", "hclk", "sclk"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>; + reset-names = "core", "axi", "ahb"; + }; + vopb: vop@ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0x0 0xff930000 0x0 0x19c>; -- 2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: jacob-chen@iotwrt.com (Jacob Chen) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v10 2/4] ARM: dts: rockchip: add RGA device node for RK3288 Date: Tue, 3 Oct 2017 17:28:37 +0800 [thread overview] Message-ID: <20171003092839.26236-3-jacob-chen@iotwrt.com> (raw) In-Reply-To: <20171003092839.26236-1-jacob-chen@iotwrt.com> This patch add the RGA dt config of rk3288 SoC. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> Signed-off-by: Yakir Yang <ykk@rock-chips.com> --- arch/arm/boot/dts/rk3288.dtsi | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi index a0a0b08bff74..8c6dfc0abc42 100644 --- a/arch/arm/boot/dts/rk3288.dtsi +++ b/arch/arm/boot/dts/rk3288.dtsi @@ -972,6 +972,17 @@ status = "disabled"; }; + rga: rga at ff920000 { + compatible = "rockchip,rk3288-rga"; + reg = <0x0 0xff920000 0x0 0x180>; + interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru ACLK_RGA>, <&cru HCLK_RGA>, <&cru SCLK_RGA>; + clock-names = "aclk", "hclk", "sclk"; + power-domains = <&power RK3288_PD_VIO>; + resets = <&cru SRST_RGA_CORE>, <&cru SRST_RGA_AXI>, <&cru SRST_RGA_AHB>; + reset-names = "core", "axi", "ahb"; + }; + vopb: vop at ff930000 { compatible = "rockchip,rk3288-vop"; reg = <0x0 0xff930000 0x0 0x19c>; -- 2.14.1
next prev parent reply other threads:[~2017-10-03 9:30 UTC|newest] Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-03 9:28 [PATCH v10 0/4] Add Rockchip RGA V4l2 support Jacob Chen 2017-10-03 9:28 ` Jacob Chen 2017-10-03 9:28 ` Jacob Chen 2017-10-03 9:28 ` [PATCH v10 1/4] rockchip/rga: v4l2 m2m support Jacob Chen 2017-10-03 9:28 ` Jacob Chen 2017-10-03 9:28 ` Jacob Chen [this message] 2017-10-03 9:28 ` [PATCH v10 2/4] ARM: dts: rockchip: add RGA device node for RK3288 Jacob Chen 2017-10-03 9:28 ` [PATCH v10 3/4] arm64: dts: rockchip: add RGA device node for RK3399 Jacob Chen 2017-10-03 9:28 ` Jacob Chen 2017-10-03 9:28 ` Jacob Chen 2017-10-03 9:28 ` [PATCH v10 4/4] dt-bindings: Document the Rockchip RGA bindings Jacob Chen 2017-10-03 9:28 ` Jacob Chen 2017-10-03 9:28 ` Jacob Chen
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20171003092839.26236-3-jacob-chen@iotwrt.com \ --to=jacob-chen@iotwrt.com \ --cc=devicetree@vger.kernel.org \ --cc=hans.verkuil@cisco.com \ --cc=heiko@sntech.de \ --cc=laurent.pinchart+renesas@ideasonboard.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-media@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=mchehab@kernel.org \ --cc=robh+dt@kernel.org \ --cc=s.nawrocki@samsung.com \ --cc=ykk@rock-chips.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.