All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 11/54] dirty-bitmap: Set iterator start by offset, not sector
Date: Fri,  6 Oct 2017 17:53:39 +0200	[thread overview]
Message-ID: <20171006155422.10135-12-kwolf@redhat.com> (raw)
In-Reply-To: <20171006155422.10135-1-kwolf@redhat.com>

From: Eric Blake <eblake@redhat.com>

All callers to bdrv_dirty_iter_new() passed 0 for their initial
starting point, drop that parameter.

Most callers to bdrv_set_dirty_iter() were scaling a byte offset to
a sector number; the exception qcow2-bitmap will be converted later
to use byte rather than sector iteration.  Move the scaling to occur
internally to dirty bitmap code instead, so that callers now pass
in bytes.

Signed-off-by: Eric Blake <eblake@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
---
 include/block/dirty-bitmap.h | 5 ++---
 block/backup.c               | 5 ++---
 block/dirty-bitmap.c         | 9 ++++-----
 block/mirror.c               | 4 ++--
 block/qcow2-bitmap.c         | 4 ++--
 5 files changed, 12 insertions(+), 15 deletions(-)

diff --git a/include/block/dirty-bitmap.h b/include/block/dirty-bitmap.h
index 5f34a1a3c7..757fc4c5b8 100644
--- a/include/block/dirty-bitmap.h
+++ b/include/block/dirty-bitmap.h
@@ -44,8 +44,7 @@ void bdrv_set_dirty_bitmap(BdrvDirtyBitmap *bitmap,
 void bdrv_reset_dirty_bitmap(BdrvDirtyBitmap *bitmap,
                              int64_t cur_sector, int64_t nr_sectors);
 BdrvDirtyBitmapIter *bdrv_dirty_meta_iter_new(BdrvDirtyBitmap *bitmap);
-BdrvDirtyBitmapIter *bdrv_dirty_iter_new(BdrvDirtyBitmap *bitmap,
-                                         uint64_t first_sector);
+BdrvDirtyBitmapIter *bdrv_dirty_iter_new(BdrvDirtyBitmap *bitmap);
 void bdrv_dirty_iter_free(BdrvDirtyBitmapIter *iter);
 
 uint64_t bdrv_dirty_bitmap_serialization_size(const BdrvDirtyBitmap *bitmap,
@@ -80,7 +79,7 @@ void bdrv_set_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap,
 void bdrv_reset_dirty_bitmap_locked(BdrvDirtyBitmap *bitmap,
                                     int64_t cur_sector, int64_t nr_sectors);
 int64_t bdrv_dirty_iter_next(BdrvDirtyBitmapIter *iter);
-void bdrv_set_dirty_iter(BdrvDirtyBitmapIter *hbi, int64_t sector_num);
+void bdrv_set_dirty_iter(BdrvDirtyBitmapIter *hbi, int64_t offset);
 int64_t bdrv_get_dirty_count(BdrvDirtyBitmap *bitmap);
 int64_t bdrv_get_meta_dirty_count(BdrvDirtyBitmap *bitmap);
 void bdrv_dirty_bitmap_truncate(BlockDriverState *bs, int64_t bytes);
diff --git a/block/backup.c b/block/backup.c
index 517c300a49..ac9c018717 100644
--- a/block/backup.c
+++ b/block/backup.c
@@ -372,7 +372,7 @@ static int coroutine_fn backup_run_incremental(BackupBlockJob *job)
 
     granularity = bdrv_dirty_bitmap_granularity(job->sync_bitmap);
     clusters_per_iter = MAX((granularity / job->cluster_size), 1);
-    dbi = bdrv_dirty_iter_new(job->sync_bitmap, 0);
+    dbi = bdrv_dirty_iter_new(job->sync_bitmap);
 
     /* Find the next dirty sector(s) */
     while ((offset = bdrv_dirty_iter_next(dbi) * BDRV_SECTOR_SIZE) >= 0) {
@@ -403,8 +403,7 @@ static int coroutine_fn backup_run_incremental(BackupBlockJob *job)
         /* If the bitmap granularity is smaller than the backup granularity,
          * we need to advance the iterator pointer to the next cluster. */
         if (granularity < job->cluster_size) {
-            bdrv_set_dirty_iter(dbi,
-                                cluster * job->cluster_size / BDRV_SECTOR_SIZE);
+            bdrv_set_dirty_iter(dbi, cluster * job->cluster_size);
         }
 
         last_cluster = cluster - 1;
diff --git a/block/dirty-bitmap.c b/block/dirty-bitmap.c
index 555c736024..84509476ba 100644
--- a/block/dirty-bitmap.c
+++ b/block/dirty-bitmap.c
@@ -473,11 +473,10 @@ uint32_t bdrv_dirty_bitmap_granularity(const BdrvDirtyBitmap *bitmap)
     return BDRV_SECTOR_SIZE << hbitmap_granularity(bitmap->bitmap);
 }
 
-BdrvDirtyBitmapIter *bdrv_dirty_iter_new(BdrvDirtyBitmap *bitmap,
-                                         uint64_t first_sector)
+BdrvDirtyBitmapIter *bdrv_dirty_iter_new(BdrvDirtyBitmap *bitmap)
 {
     BdrvDirtyBitmapIter *iter = g_new(BdrvDirtyBitmapIter, 1);
-    hbitmap_iter_init(&iter->hbi, bitmap->bitmap, first_sector);
+    hbitmap_iter_init(&iter->hbi, bitmap->bitmap, 0);
     iter->bitmap = bitmap;
     bitmap->active_iterators++;
     return iter;
@@ -645,9 +644,9 @@ void bdrv_set_dirty(BlockDriverState *bs, int64_t cur_sector,
 /**
  * Advance a BdrvDirtyBitmapIter to an arbitrary offset.
  */
-void bdrv_set_dirty_iter(BdrvDirtyBitmapIter *iter, int64_t sector_num)
+void bdrv_set_dirty_iter(BdrvDirtyBitmapIter *iter, int64_t offset)
 {
-    hbitmap_iter_init(&iter->hbi, iter->hbi.hb, sector_num);
+    hbitmap_iter_init(&iter->hbi, iter->hbi.hb, offset >> BDRV_SECTOR_BITS);
 }
 
 int64_t bdrv_get_dirty_count(BdrvDirtyBitmap *bitmap)
diff --git a/block/mirror.c b/block/mirror.c
index 6f5cb9f26c..0c705e0b4f 100644
--- a/block/mirror.c
+++ b/block/mirror.c
@@ -373,7 +373,7 @@ static uint64_t coroutine_fn mirror_iteration(MirrorBlockJob *s)
         next_dirty = bdrv_dirty_iter_next(s->dbi) * BDRV_SECTOR_SIZE;
         if (next_dirty > next_offset || next_dirty < 0) {
             /* The bitmap iterator's cache is stale, refresh it */
-            bdrv_set_dirty_iter(s->dbi, next_offset >> BDRV_SECTOR_BITS);
+            bdrv_set_dirty_iter(s->dbi, next_offset);
             next_dirty = bdrv_dirty_iter_next(s->dbi) * BDRV_SECTOR_SIZE;
         }
         assert(next_dirty == next_offset);
@@ -796,7 +796,7 @@ static void coroutine_fn mirror_run(void *opaque)
     }
 
     assert(!s->dbi);
-    s->dbi = bdrv_dirty_iter_new(s->dirty_bitmap, 0);
+    s->dbi = bdrv_dirty_iter_new(s->dirty_bitmap);
     for (;;) {
         uint64_t delay_ns = 0;
         int64_t cnt, delta;
diff --git a/block/qcow2-bitmap.c b/block/qcow2-bitmap.c
index 8324468b16..90756cf561 100644
--- a/block/qcow2-bitmap.c
+++ b/block/qcow2-bitmap.c
@@ -1103,7 +1103,7 @@ static uint64_t *store_bitmap_data(BlockDriverState *bs,
         return NULL;
     }
 
-    dbi = bdrv_dirty_iter_new(bitmap, 0);
+    dbi = bdrv_dirty_iter_new(bitmap);
     buf = g_malloc(s->cluster_size);
     limit = bytes_covered_by_bitmap_cluster(s, bitmap);
     sbc = limit >> BDRV_SECTOR_BITS;
@@ -1153,7 +1153,7 @@ static uint64_t *store_bitmap_data(BlockDriverState *bs,
             break;
         }
 
-        bdrv_set_dirty_iter(dbi, end);
+        bdrv_set_dirty_iter(dbi, end * BDRV_SECTOR_SIZE);
     }
 
     *bitmap_table_size = tb_size;
-- 
2.13.6

  parent reply	other threads:[~2017-10-06 15:54 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-06 15:53 [Qemu-devel] [PULL 00/54] Block layer patches Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 01/54] block: Typo fix in copy_on_readv() Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 02/54] block: Make bdrv_img_create() size selection easier to read Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 03/54] hbitmap: Rename serialization_granularity to serialization_align Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 04/54] qcow2: Ensure bitmap serialization is aligned Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 05/54] dirty-bitmap: Drop unused functions Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 06/54] dirty-bitmap: Avoid size query failure during truncate Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 07/54] dirty-bitmap: Change bdrv_dirty_bitmap_size() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 08/54] dirty-bitmap: Track bitmap size by bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 09/54] dirty-bitmap: Change bdrv_dirty_bitmap_*serialize*() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 10/54] qcow2: Switch sectors_covered_by_bitmap_cluster() to byte-based Kevin Wolf
2017-10-06 15:53 ` Kevin Wolf [this message]
2017-10-06 15:53 ` [Qemu-devel] [PULL 12/54] dirty-bitmap: Change bdrv_dirty_iter_next() to report byte offset Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 13/54] dirty-bitmap: Change bdrv_get_dirty_count() to report bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 14/54] dirty-bitmap: Change bdrv_get_dirty_locked() to take bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 15/54] dirty-bitmap: Change bdrv_[re]set_dirty_bitmap() to use bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 16/54] mirror: Switch mirror_dirty_init() to byte-based iteration Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 17/54] qcow2: Switch qcow2_measure() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 18/54] qcow2: Switch load_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 19/54] qcow2: Switch store_bitmap_data() " Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 20/54] dirty-bitmap: Switch bdrv_set_dirty() to bytes Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 21/54] dirty-bitmap: Convert internal hbitmap size/granularity Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 22/54] hw/block/onenand: Remove dead code block Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 23/54] qemu-iotests: remove dead code Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 24/54] qemu-iotests: get rid of AWK_PROG Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 25/54] qemu-iotests: move "check" code out of common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 26/54] qemu-iotests: cleanup and fix search for programs Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 27/54] qemu-iotests: limit non-_PROG-suffixed variables to common.rc Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 28/54] qemu-iotests: do not include common.rc in "check" Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 29/54] qemu-iotests: disintegrate more parts of common.config Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 30/54] qemu-iotests: fix uninitialized variable Kevin Wolf
2017-10-06 15:53 ` [Qemu-devel] [PULL 31/54] qemu-iotests: get rid of $iam Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 32/54] qemu-iotests: merge "check" and "common" Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 33/54] block: Introduce BdrvChildRole.update_filename Kevin Wolf
2017-11-03 18:34   ` Peter Maydell
2017-10-06 15:54 ` [Qemu-devel] [PULL 34/54] commit: Support multiple roots above top node Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 35/54] qemu-iotests: Allow QMP pretty printing in common.qemu Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 36/54] qemu-iotests: Test commit block job where top has two parents Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 37/54] commit: Remove overlay_bs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 38/54] qemu-io: Add -C for opening with copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 39/54] block: Uniform handling of 0-length bdrv_get_block_status() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 40/54] iotests: Restore stty settings on completion Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 41/54] block: Add blkdebug hook for copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 42/54] block: Perform copy-on-read in loop Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 43/54] iotests: Add test 197 for covering copy-on-read Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 44/54] block: use 1 MB bounce buffers for crypto instead of 16KB Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 45/54] crypto: expose encryption sector size in APIs Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 46/54] block: fix data type casting for crypto payload offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 47/54] block: convert crypto driver to bdrv_co_preadv|pwritev Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 48/54] block: convert qcrypto_block_encrypt|decrypt to take bytes offset Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 49/54] block: support passthrough of BDRV_REQ_FUA in crypto driver Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 50/54] block/mirror: check backing in bdrv_mirror_top_refresh_filename Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 51/54] iotests: Fix 195 if IMGFMT is part of TEST_DIR Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 52/54] qcow2: fix return error code in qcow2_truncate() Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 53/54] qcow2: truncate the tail of the image file after shrinking the image Kevin Wolf
2017-10-06 15:54 ` [Qemu-devel] [PULL 54/54] block/mirror: check backing in bdrv_mirror_top_flush Kevin Wolf
2017-10-06 18:01 ` [Qemu-devel] [PULL 00/54] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171006155422.10135-12-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.