From: Mel Gorman <mgorman@techsingularity.net> To: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-MM <linux-mm@kvack.org>, Linux-FSDevel <linux-fsdevel@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>, Jan Kara <jack@suse.cz>, Andi Kleen <ak@linux.intel.com>, Dave Hansen <dave.hansen@intel.com>, Dave Chinner <david@fromorbit.com>, Mel Gorman <mgorman@techsingularity.net> Subject: [PATCH 4/8] mm: Only drain per-cpu pagevecs once per pagevec usage Date: Wed, 18 Oct 2017 08:59:48 +0100 [thread overview] Message-ID: <20171018075952.10627-5-mgorman@techsingularity.net> (raw) In-Reply-To: <20171018075952.10627-1-mgorman@techsingularity.net> When a pagevec is initialised on the stack, it is generally used multiple times over a range of pages, looking up entries and then releasing them. On each pagevec_release, the per-cpu deferred LRU pagevecs are drained on the grounds the page being released may be on those queues and the pages may be cache hot. In many cases only the first drain is necessary as it's unlikely that the range of pages being walked is racing against LRU addition. Even if there is such a race, the impact is marginal where as constantly redraining the lru pagevecs costs. This patch ensures that pagevec is only drained once in a given lifecycle without increasing the cache footprint of the pagevec structure. Only sparsetruncate tiny is shown here as large files have many exceptional entries and calls pagecache_release less frequently. sparsetruncate (tiny) 4.14.0-rc4 4.14.0-rc4 batchshadow-v1r1 onedrain-v1r1 Min Time 141.00 ( 0.00%) 141.00 ( 0.00%) 1st-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 2nd-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 3rd-qrtle Time 143.00 ( 0.00%) 143.00 ( 0.00%) Max-90% Time 144.00 ( 0.00%) 144.00 ( 0.00%) Max-95% Time 146.00 ( 0.00%) 145.00 ( 0.68%) Max-99% Time 198.00 ( 0.00%) 194.00 ( 2.02%) Max Time 254.00 ( 0.00%) 208.00 ( 18.11%) Amean Time 145.12 ( 0.00%) 144.30 ( 0.56%) Stddev Time 12.74 ( 0.00%) 9.62 ( 24.49%) Coeff Time 8.78 ( 0.00%) 6.67 ( 24.06%) Best99%Amean Time 144.29 ( 0.00%) 143.82 ( 0.32%) Best95%Amean Time 142.68 ( 0.00%) 142.31 ( 0.26%) Best90%Amean Time 142.52 ( 0.00%) 142.19 ( 0.24%) Best75%Amean Time 142.26 ( 0.00%) 141.98 ( 0.20%) Best50%Amean Time 141.90 ( 0.00%) 141.71 ( 0.13%) Best25%Amean Time 141.80 ( 0.00%) 141.43 ( 0.26%) The impact on bonnie is marginal and within the noise because a significant percentage of the file being truncated has been reclaimed and consists of shadow entries which reduce the hotness of the pagevec_release path. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> --- include/linux/pagevec.h | 4 +++- mm/swap.c | 5 ++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/linux/pagevec.h b/include/linux/pagevec.h index 4dcd5506f1ed..4231979be982 100644 --- a/include/linux/pagevec.h +++ b/include/linux/pagevec.h @@ -16,7 +16,8 @@ struct address_space; struct pagevec { unsigned long nr; - unsigned long cold; + bool cold; + bool drained; struct page *pages[PAGEVEC_SIZE]; }; @@ -45,6 +46,7 @@ static inline void pagevec_init(struct pagevec *pvec, int cold) { pvec->nr = 0; pvec->cold = cold; + pvec->drained = false; } static inline void pagevec_reinit(struct pagevec *pvec) diff --git a/mm/swap.c b/mm/swap.c index a77d68f2c1b6..31bd9d8a5db7 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -833,7 +833,10 @@ EXPORT_SYMBOL(release_pages); */ void __pagevec_release(struct pagevec *pvec) { - lru_add_drain(); + if (!pvec->drained) { + lru_add_drain(); + pvec->drained = true; + } release_pages(pvec->pages, pagevec_count(pvec), pvec->cold); pagevec_reinit(pvec); } -- 2.14.0
WARNING: multiple messages have this Message-ID (diff)
From: Mel Gorman <mgorman@techsingularity.net> To: Andrew Morton <akpm@linux-foundation.org> Cc: Linux-MM <linux-mm@kvack.org>, Linux-FSDevel <linux-fsdevel@vger.kernel.org>, LKML <linux-kernel@vger.kernel.org>, Jan Kara <jack@suse.cz>, Andi Kleen <ak@linux.intel.com>, Dave Hansen <dave.hansen@intel.com>, Dave Chinner <david@fromorbit.com>, Mel Gorman <mgorman@techsingularity.net> Subject: [PATCH 4/8] mm: Only drain per-cpu pagevecs once per pagevec usage Date: Wed, 18 Oct 2017 08:59:48 +0100 [thread overview] Message-ID: <20171018075952.10627-5-mgorman@techsingularity.net> (raw) In-Reply-To: <20171018075952.10627-1-mgorman@techsingularity.net> When a pagevec is initialised on the stack, it is generally used multiple times over a range of pages, looking up entries and then releasing them. On each pagevec_release, the per-cpu deferred LRU pagevecs are drained on the grounds the page being released may be on those queues and the pages may be cache hot. In many cases only the first drain is necessary as it's unlikely that the range of pages being walked is racing against LRU addition. Even if there is such a race, the impact is marginal where as constantly redraining the lru pagevecs costs. This patch ensures that pagevec is only drained once in a given lifecycle without increasing the cache footprint of the pagevec structure. Only sparsetruncate tiny is shown here as large files have many exceptional entries and calls pagecache_release less frequently. sparsetruncate (tiny) 4.14.0-rc4 4.14.0-rc4 batchshadow-v1r1 onedrain-v1r1 Min Time 141.00 ( 0.00%) 141.00 ( 0.00%) 1st-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 2nd-qrtle Time 142.00 ( 0.00%) 142.00 ( 0.00%) 3rd-qrtle Time 143.00 ( 0.00%) 143.00 ( 0.00%) Max-90% Time 144.00 ( 0.00%) 144.00 ( 0.00%) Max-95% Time 146.00 ( 0.00%) 145.00 ( 0.68%) Max-99% Time 198.00 ( 0.00%) 194.00 ( 2.02%) Max Time 254.00 ( 0.00%) 208.00 ( 18.11%) Amean Time 145.12 ( 0.00%) 144.30 ( 0.56%) Stddev Time 12.74 ( 0.00%) 9.62 ( 24.49%) Coeff Time 8.78 ( 0.00%) 6.67 ( 24.06%) Best99%Amean Time 144.29 ( 0.00%) 143.82 ( 0.32%) Best95%Amean Time 142.68 ( 0.00%) 142.31 ( 0.26%) Best90%Amean Time 142.52 ( 0.00%) 142.19 ( 0.24%) Best75%Amean Time 142.26 ( 0.00%) 141.98 ( 0.20%) Best50%Amean Time 141.90 ( 0.00%) 141.71 ( 0.13%) Best25%Amean Time 141.80 ( 0.00%) 141.43 ( 0.26%) The impact on bonnie is marginal and within the noise because a significant percentage of the file being truncated has been reclaimed and consists of shadow entries which reduce the hotness of the pagevec_release path. Signed-off-by: Mel Gorman <mgorman@techsingularity.net> --- include/linux/pagevec.h | 4 +++- mm/swap.c | 5 ++++- 2 files changed, 7 insertions(+), 2 deletions(-) diff --git a/include/linux/pagevec.h b/include/linux/pagevec.h index 4dcd5506f1ed..4231979be982 100644 --- a/include/linux/pagevec.h +++ b/include/linux/pagevec.h @@ -16,7 +16,8 @@ struct address_space; struct pagevec { unsigned long nr; - unsigned long cold; + bool cold; + bool drained; struct page *pages[PAGEVEC_SIZE]; }; @@ -45,6 +46,7 @@ static inline void pagevec_init(struct pagevec *pvec, int cold) { pvec->nr = 0; pvec->cold = cold; + pvec->drained = false; } static inline void pagevec_reinit(struct pagevec *pvec) diff --git a/mm/swap.c b/mm/swap.c index a77d68f2c1b6..31bd9d8a5db7 100644 --- a/mm/swap.c +++ b/mm/swap.c @@ -833,7 +833,10 @@ EXPORT_SYMBOL(release_pages); */ void __pagevec_release(struct pagevec *pvec) { - lru_add_drain(); + if (!pvec->drained) { + lru_add_drain(); + pvec->drained = true; + } release_pages(pvec->pages, pagevec_count(pvec), pvec->cold); pagevec_reinit(pvec); } -- 2.14.0 -- To unsubscribe, send a message with 'unsubscribe linux-mm' in the body to majordomo@kvack.org. For more info on Linux MM, see: http://www.linux-mm.org/ . Don't email: <a href=mailto:"dont@kvack.org"> email@kvack.org </a>
next prev parent reply other threads:[~2017-10-18 8:00 UTC|newest] Thread overview: 47+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-10-18 7:59 [PATCH 0/8] Follow-up for speed up page cache truncation v2 Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-18 7:59 ` [PATCH 1/8] mm, page_alloc: Enable/disable IRQs once when freeing a list of pages Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-18 9:02 ` Vlastimil Babka 2017-10-18 9:02 ` Vlastimil Babka 2017-10-18 10:15 ` Mel Gorman 2017-10-18 10:15 ` Mel Gorman 2017-10-18 7:59 ` [PATCH 2/8] mm, truncate: Do not check mapping for every page being truncated Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-19 8:11 ` Jan Kara 2017-10-19 8:11 ` Jan Kara 2017-10-18 7:59 ` [PATCH 3/8] mm, truncate: Remove all exceptional entries from pagevec under one lock Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-18 7:59 ` Mel Gorman [this message] 2017-10-18 7:59 ` [PATCH 4/8] mm: Only drain per-cpu pagevecs once per pagevec usage Mel Gorman 2017-10-19 9:12 ` Vlastimil Babka 2017-10-19 9:12 ` Vlastimil Babka 2017-10-19 9:33 ` Mel Gorman 2017-10-19 9:33 ` Mel Gorman 2017-10-19 13:21 ` Vlastimil Babka 2017-10-19 13:21 ` Vlastimil Babka 2017-10-18 7:59 ` [PATCH 5/8] mm, pagevec: Remove cold parameter for pagevecs Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-19 9:24 ` Vlastimil Babka 2017-10-19 9:24 ` Vlastimil Babka 2017-10-18 7:59 ` [PATCH 6/8] mm: Remove cold parameter for release_pages Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-19 9:26 ` Vlastimil Babka 2017-10-19 9:26 ` Vlastimil Babka 2017-10-18 7:59 ` [PATCH 7/8] mm, Remove cold parameter from free_hot_cold_page* Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-19 13:12 ` Vlastimil Babka 2017-10-19 13:12 ` Vlastimil Babka 2017-10-19 15:43 ` Mel Gorman 2017-10-19 15:43 ` Mel Gorman 2017-10-18 7:59 ` [PATCH 8/8] mm: Remove __GFP_COLD Mel Gorman 2017-10-18 7:59 ` Mel Gorman 2017-10-19 13:18 ` Vlastimil Babka 2017-10-19 13:18 ` Vlastimil Babka 2017-10-19 13:42 ` Vlastimil Babka 2017-10-19 13:42 ` Vlastimil Babka 2017-10-19 13:42 ` Vlastimil Babka 2017-10-19 14:32 ` Mel Gorman 2017-10-19 14:32 ` Mel Gorman -- strict thread matches above, loose matches on Subject: below -- 2017-10-12 9:30 [PATCH 0/8] Follow-up for speed up page cache truncation Mel Gorman 2017-10-12 9:30 ` [PATCH 4/8] mm: Only drain per-cpu pagevecs once per pagevec usage Mel Gorman 2017-10-12 9:30 ` Mel Gorman
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20171018075952.10627-5-mgorman@techsingularity.net \ --to=mgorman@techsingularity.net \ --cc=ak@linux.intel.com \ --cc=akpm@linux-foundation.org \ --cc=dave.hansen@intel.com \ --cc=david@fromorbit.com \ --cc=jack@suse.cz \ --cc=linux-fsdevel@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-mm@kvack.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.