All of lore.kernel.org
 help / color / mirror / Atom feed
From: Gerd Hoffmann <kraxel@redhat.com>
To: qemu-devel@nongnu.org
Cc: "Daniel P. Berrange" <berrange@redhat.com>,
	Gerd Hoffmann <kraxel@redhat.com>
Subject: [Qemu-devel] [PULL 4/9] ps2: fix scancodes sent for Alt-Print key combination (aka SysRq)
Date: Mon, 23 Oct 2017 11:19:42 +0200	[thread overview]
Message-ID: <20171023091947.20771-5-kraxel@redhat.com> (raw)
In-Reply-To: <20171023091947.20771-1-kraxel@redhat.com>

From: "Daniel P. Berrange" <berrange@redhat.com>

The 'Print' key is special in the AT set 1 / set 2 scancode definitions.

An unmodified 'Print' key is supposed to send

 AT Set 1:  e0 2a e0 37 (Down)  e0 b7 e0 aa (Up)
 AT Set 2:  e0 12 e0 7c (Down)  e0 f0 7c e0 f0 12 (Up)

which QEMU gets right. When pressed in combination with the 'Alt_L' or 'Alt_R'
keys (which signify SysRq), the scancodes are required to follow a different
scheme. With Alt_L, the expected sequences are

 AT set 1:  38, 54 (Down) d4, b8 (Up)
 AT set 2:  11, 84 (Down) f0 84, f0 11 (Up)

And with Alt_R

 AT set 1:  e0 38, 54 (Down) d4, e0 b8 (Up)
 AT set 2:  e0 11, 84 (Down) f0 84, f0 e0 11 (Up)

It is actually slightly more complicated than that, because (according results
of 'showkey -s', keyboards will in fact first release the currently pressed
modifier before sending the sequence above (which effectively re-presses &
then releases the modifier) and finally re-press the original modifier
afterwards. IOW, with Alt_L we need to send

 AT set 1:  b8, 38, 54 (Down) d4, b8, 38 (Up)
 AT set 2:  f0 11, 11, 84 (Down) f0 84, f0 11, 11 (Up)

And with Alt_R

 AT set 1:  e0 b8, e0 38, 54 (Down) d4, e0 b8, e0 38 (Up)
 AT set 2:  e0 f0 11, e0 11, 84 (Down) f0 84, e0 f0 11, e0 11 (Up)

The AT set 3 scancodes have no special handling for Alt-Print.

Rather than fixing the handling of the 'print' key in the ps2 driver to consider
the Alt modifiers, way back, a patch was commited that defined an extra 'sysrq'
key name:

  commit f2289cb6924afc97b2a75d21bfc9217024d11741
  Author: balrog <balrog@c046a42c-6fe2-441c-8c8c-71466251a162>
  Date:   Wed Jun 4 10:14:16 2008 +0000

    Add sysrq to key names known by "sendkey".

    Adding sysrq keycode to the table enabling running sysrq debugging in
    the guest via the monitor sendkey command, like:

    (qemu) sendkey alt-sysrq-t

    Tested on x86-64 target and Linux guest.

    Signed-off-by: Ryan Harper <ryanh@us.ibm.com>

With this patch QEMU would send

 AT set 1:  38, 54 (Down) d4, b8 (Up)
 AT set 2:  11, 84 (Down) f0 84, f0 11 (Up)

but this doesn't match what actual real keyboards send, as it is not releasing
the original modifier & pressing it again afterwards. In addition the original
problem remains, and a new problem was added:

  - The sequence 'alt-print-t' is still broken, acting as if 'print-t' was
    requested
  - The sequence 'sysrq-t' is broken, injecting an undefine scancode sequence
    tot he guest os (bare 0x54)

To deal with this mess we make these changes to the ps2 code, so that we track
the state of modifier keys (Alt, Shift, Ctrl - both left & right). Then we can
vary what scancodes are sent for Q_KEY_CODE_PRINT according to the Alt key
modifier state

Interestingly, it appears that of operating systems I've checked (Linux, FreeBSD
and OpenSolaris), none of them actually bother to validate the full sequences
for a unmodified 'Print' key. They all just ignore the leading "e0 2a" and
trigger based off "e0 37" alone. The latter two byte sequence is what keyboards
send with 'Print' is combined with 'Shift' or 'Ctrl' modifiers.

Signed-off-by: Daniel P. Berrange <berrange@redhat.com>
Message-id: 20171019142848.572-5-berrange@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
---
 hw/input/ps2.c        | 137 ++++++++++++++++++++++++++++++++++++++++++--------
 hw/input/trace-events |   1 +
 2 files changed, 118 insertions(+), 20 deletions(-)

diff --git a/hw/input/ps2.c b/hw/input/ps2.c
index dff3f1e024..1e6f6ae9b6 100644
--- a/hw/input/ps2.c
+++ b/hw/input/ps2.c
@@ -78,6 +78,14 @@
 
 #define PS2_QUEUE_SIZE 16  /* Buffer size required by PS/2 protocol */
 
+/* Bits for 'modifiers' field in PS2KbdState */
+#define MOD_CTRL_L  (1 << 0)
+#define MOD_SHIFT_L (1 << 1)
+#define MOD_ALT_L   (1 << 2)
+#define MOD_CTRL_R  (1 << 3)
+#define MOD_SHIFT_R (1 << 4)
+#define MOD_ALT_R   (1 << 5)
+
 typedef struct {
     /* Keep the data array 256 bytes long, which compatibility
      with older qemu versions. */
@@ -99,6 +107,7 @@ typedef struct {
     int scancode_set; /* 1=XT, 2=AT, 3=PS/2 */
     int ledstate;
     bool need_high_bit;
+    unsigned int modifiers; /* bitmask of MOD_* constants above */
 } PS2KbdState;
 
 typedef struct {
@@ -545,6 +554,26 @@ static uint8_t translate_table[256] = {
     0xf8, 0xf9, 0xfa, 0xfb, 0xfc, 0xfd, 0xfe, 0xff,
 };
 
+static unsigned int ps2_modifier_bit(QKeyCode key)
+{
+    switch (key) {
+    case Q_KEY_CODE_CTRL:
+        return MOD_CTRL_L;
+    case Q_KEY_CODE_CTRL_R:
+        return MOD_CTRL_R;
+    case Q_KEY_CODE_SHIFT:
+        return MOD_SHIFT_L;
+    case Q_KEY_CODE_SHIFT_R:
+        return MOD_SHIFT_R;
+    case Q_KEY_CODE_ALT:
+        return MOD_ALT_L;
+    case Q_KEY_CODE_ALT_R:
+        return MOD_ALT_R;
+    default:
+        return 0;
+    }
+}
+
 static void ps2_reset_queue(PS2State *s)
 {
     PS2Queue *q = &s->queue;
@@ -596,11 +625,20 @@ static void ps2_keyboard_event(DeviceState *dev, QemuConsole *src,
     InputKeyEvent *key = evt->u.key.data;
     int qcode;
     uint16_t keycode;
+    int mod;
 
     qemu_system_wakeup_request(QEMU_WAKEUP_REASON_OTHER);
     assert(evt->type == INPUT_EVENT_KIND_KEY);
     qcode = qemu_input_key_value_to_qcode(key->key);
 
+    mod = ps2_modifier_bit(qcode);
+    trace_ps2_keyboard_event(s, qcode, key->down, mod, s->modifiers);
+    if (key->down) {
+        s->modifiers |= mod;
+    } else {
+        s->modifiers &= ~mod;
+    }
+
     if (s->scancode_set == 1) {
         if (qcode == Q_KEY_CODE_PAUSE) {
             if (key->down) {
@@ -612,16 +650,42 @@ static void ps2_keyboard_event(DeviceState *dev, QemuConsole *src,
                 ps2_put_keycode(s, 0xc5);
             }
         } else if (qcode == Q_KEY_CODE_PRINT) {
-            if (key->down) {
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0x2a);
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0x37);
+            if (s->modifiers & MOD_ALT_L) {
+                if (key->down) {
+                    ps2_put_keycode(s, 0xb8);
+                    ps2_put_keycode(s, 0x38);
+                    ps2_put_keycode(s, 0x54);
+                } else {
+                    ps2_put_keycode(s, 0xd4);
+                    ps2_put_keycode(s, 0xb8);
+                    ps2_put_keycode(s, 0x38);
+                }
+            } else if (s->modifiers & MOD_ALT_R) {
+                if (key->down) {
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xb8);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x38);
+                    ps2_put_keycode(s, 0x54);
+                } else {
+                    ps2_put_keycode(s, 0xd4);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xb8);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x38);
+                }
             } else {
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0xb7);
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0xaa);
+                if (key->down) {
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x2a);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x37);
+                } else {
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xb7);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xaa);
+                }
             }
         } else {
             keycode = qcode_to_keycode_set1[qcode];
@@ -651,18 +715,50 @@ static void ps2_keyboard_event(DeviceState *dev, QemuConsole *src,
                 ps2_put_keycode(s, 0x77);
             }
         } else if (qcode == Q_KEY_CODE_PRINT) {
-            if (key->down) {
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0x12);
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0x7c);
+            if (s->modifiers & MOD_ALT_L) {
+                if (key->down) {
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x11);
+                    ps2_put_keycode(s, 0x11);
+                    ps2_put_keycode(s, 0x84);
+                } else {
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x84);
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x11);
+                    ps2_put_keycode(s, 0x11);
+                }
+            } else if (s->modifiers & MOD_ALT_R) {
+                if (key->down) {
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x11);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x11);
+                    ps2_put_keycode(s, 0x84);
+                } else {
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x84);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x11);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x11);
+                }
             } else {
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0xf0);
-                ps2_put_keycode(s, 0x7c);
-                ps2_put_keycode(s, 0xe0);
-                ps2_put_keycode(s, 0xf0);
-                ps2_put_keycode(s, 0x12);
+                if (key->down) {
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x12);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0x7c);
+                } else {
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x7c);
+                    ps2_put_keycode(s, 0xe0);
+                    ps2_put_keycode(s, 0xf0);
+                    ps2_put_keycode(s, 0x12);
+                }
             }
         } else {
             keycode = qcode_to_keycode_set2[qcode];
@@ -1125,6 +1221,7 @@ static void ps2_kbd_reset(void *opaque)
     s->scan_enabled = 0;
     s->translate = 0;
     s->scancode_set = 2;
+    s->modifiers = 0;
 }
 
 static void ps2_mouse_reset(void *opaque)
diff --git a/hw/input/trace-events b/hw/input/trace-events
index d04132d342..88150ef7a6 100644
--- a/hw/input/trace-events
+++ b/hw/input/trace-events
@@ -2,6 +2,7 @@
 
 # hw/input/ps2.c
 ps2_put_keycode(void *opaque, int keycode) "%p keycode 0x%02x"
+ps2_keyboard_event(void *opaque, int qcode, int down, unsigned int modifier, unsigned int modifiers) "%p qcode %d down %d modifier 0x%x modifiers 0x%x"
 ps2_read_data(void *opaque) "%p"
 ps2_set_ledstate(void *s, int ledstate) "%p ledstate %d"
 ps2_reset_keyboard(void *s) "%p"
-- 
2.9.3

  parent reply	other threads:[~2017-10-23  9:19 UTC|newest]

Thread overview: 14+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-10-23  9:19 [Qemu-devel] [PULL 0/9] Input 20171023 patches Gerd Hoffmann
2017-10-23  9:19 ` [Qemu-devel] [PULL 1/9] input: use hex in ps2 keycode trace events Gerd Hoffmann
2017-10-23  9:19 ` [Qemu-devel] [PULL 2/9] ui: fix crash with sendkey and raw key numbers Gerd Hoffmann
2017-10-23  9:19 ` [Qemu-devel] [PULL 3/9] ui: use correct union field for key number Gerd Hoffmann
2017-10-23  9:19 ` Gerd Hoffmann [this message]
2017-10-27  7:29   ` [Qemu-devel] [PULL 4/9] ps2: fix scancodes sent for Alt-Print key combination (aka SysRq) Daniel P. Berrange
2017-11-01  7:58     ` Gerd Hoffmann
2017-11-01 10:00       ` Daniel P. Berrange
2017-10-23  9:19 ` [Qemu-devel] [PULL 5/9] ps2: fix scancodes sent for Shift/Ctrl+Print key combination Gerd Hoffmann
2017-10-23  9:19 ` [Qemu-devel] [PULL 6/9] ps2: fix scancodess sent for Pause key in AT set 1 Gerd Hoffmann
2017-10-23  9:19 ` [Qemu-devel] [PULL 7/9] ps2: fix scancodes sent for Ctrl+Pause key combination Gerd Hoffmann
2017-10-23  9:19 ` [Qemu-devel] [PULL 8/9] ui: normalize the 'sysrq' key into the 'print' key Gerd Hoffmann
2017-10-23  9:19 ` [Qemu-devel] [PULL 9/9] ui: pull in latest keycodemapdb Gerd Hoffmann
2017-10-25 14:23 ` [Qemu-devel] [PULL 0/9] Input 20171023 patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20171023091947.20771-5-kraxel@redhat.com \
    --to=kraxel@redhat.com \
    --cc=berrange@redhat.com \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.