From: Enric Balletbo i Serra <enric.balletbo@collabora.com> To: Lee Jones <lee.jones@linaro.org>, Daniel Thompson <daniel.thompson@linaro.org>, Jingoo Han <jingoohan1@gmail.com>, Rob Herring <robh+dt@kernel.org>, Pavel Machek <pavel@ucw.cz>, Heiko Stuebner <heiko@sntech.de> Cc: Thierry Reding <thierry.reding@gmail.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Richard Purdie <rpurdie@rpsys.net>, Jacek Anaszewski <jacek.anaszewski@gmail.com>, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, groeck@chromium.org, linux-rockchip@lists.infradead.org Subject: [PATCH v5 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie Date: Fri, 1 Dec 2017 13:06:51 +0100 [thread overview] Message-ID: <20171201120651.29633-5-enric.balletbo@collabora.com> (raw) In-Reply-To: <20171201120651.29633-1-enric.balletbo@collabora.com> The minnie devices comes with an AUO B101EAN01 panel which is different from default veyron devices, thus the power on/off timing sequence is slightly different. The datasheet specifies a pwm delay of 200 ms, so update the PMW delay proprieties accordingly. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- Heiko, I'm not able to test this patch in a minnie device because I don't have one, so could you do a quick try, please? Changes since v4: - Rebase on top of mainline. Changes since v3: - Use new -ms names for proprieties. - Fix the delay, should be 200ms instead of 20ms (Pavel) Changes since v2: - Use new names for proprieties. Changes since v1: - Add this new patch as minnie has differents timings arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 544de60..4c5307e6 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -123,6 +123,8 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; power-supply = <&backlight_regulator>; + post-pwm-on-delay-ms = <200>; + pwm-off-delay-ms = <200>; }; &emmc { -- 2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Enric Balletbo i Serra <enric.balletbo@collabora.com> To: Lee Jones <lee.jones@linaro.org>, Daniel Thompson <daniel.thompson@linaro.org>, Jingoo Han <jingoohan1@gmail.com>, Rob Herring <robh+dt@kernel.org>, Pavel Machek <pavel@ucw.cz>, Heiko Stuebner <heiko@sntech.de> Cc: Thierry Reding <thierry.reding@gmail.com>, Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>, Richard Purdie <rpurdie@rpsys.net>, Jacek Anaszewski <jacek.anaszewski@gmail.com>, linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-kernel@vger.kernel.org, groeck@chromium.org, linux-rockchip@lists.infradead.org Subject: [PATCH v5 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie Date: Fri, 01 Dec 2017 12:06:51 +0000 [thread overview] Message-ID: <20171201120651.29633-5-enric.balletbo@collabora.com> (raw) In-Reply-To: <20171201120651.29633-1-enric.balletbo@collabora.com> The minnie devices comes with an AUO B101EAN01 panel which is different from default veyron devices, thus the power on/off timing sequence is slightly different. The datasheet specifies a pwm delay of 200 ms, so update the PMW delay proprieties accordingly. Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com> --- Heiko, I'm not able to test this patch in a minnie device because I don't have one, so could you do a quick try, please? Changes since v4: - Rebase on top of mainline. Changes since v3: - Use new -ms names for proprieties. - Fix the delay, should be 200ms instead of 20ms (Pavel) Changes since v2: - Use new names for proprieties. Changes since v1: - Add this new patch as minnie has differents timings arch/arm/boot/dts/rk3288-veyron-minnie.dts | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/arm/boot/dts/rk3288-veyron-minnie.dts b/arch/arm/boot/dts/rk3288-veyron-minnie.dts index 544de60..4c5307e6 100644 --- a/arch/arm/boot/dts/rk3288-veyron-minnie.dts +++ b/arch/arm/boot/dts/rk3288-veyron-minnie.dts @@ -123,6 +123,8 @@ 240 241 242 243 244 245 246 247 248 249 250 251 252 253 254 255>; power-supply = <&backlight_regulator>; + post-pwm-on-delay-ms = <200>; + pwm-off-delay-ms = <200>; }; &emmc { -- 2.9.3
next prev parent reply other threads:[~2017-12-01 12:07 UTC|newest] Thread overview: 18+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-12-01 12:06 [PATCH v5 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle Enric Balletbo i Serra 2017-12-01 12:06 ` Enric Balletbo i Serra 2017-12-01 12:06 ` [PATCH v5 2/5] dt-bindings: pwm-backlight: add PWM delay proprieties Enric Balletbo i Serra 2017-12-01 12:06 ` Enric Balletbo i Serra 2017-12-01 12:06 ` Enric Balletbo i Serra 2017-12-01 12:06 ` [PATCH v5 3/5] pwm-backlight: add support for PWM delays proprieties Enric Balletbo i Serra 2017-12-01 12:06 ` Enric Balletbo i Serra 2017-12-01 12:06 ` Enric Balletbo i Serra 2017-12-01 12:06 ` [PATCH v5 4/5] ARM: dts: rockchip: set PWM delay backlight settings for Veyron Enric Balletbo i Serra 2017-12-01 12:06 ` Enric Balletbo i Serra 2017-12-01 12:06 ` Enric Balletbo i Serra [this message] 2017-12-01 12:06 ` [PATCH v5 5/5] ARM: dts: rockchip: set PWM delay backlight settings for Minnie Enric Balletbo i Serra 2017-12-15 10:57 ` Pavel Machek 2017-12-15 10:57 ` Pavel Machek 2018-01-30 9:30 ` [PATCH v5 1/5] pwm-backlight: enable/disable the PWM before/after LCD enable toggle Enric Balletbo Serra 2018-01-30 9:30 ` Enric Balletbo Serra 2018-02-01 12:06 ` Lee Jones 2018-02-01 12:06 ` Lee Jones
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20171201120651.29633-5-enric.balletbo@collabora.com \ --to=enric.balletbo@collabora.com \ --cc=b.zolnierkie@samsung.com \ --cc=daniel.thompson@linaro.org \ --cc=groeck@chromium.org \ --cc=heiko@sntech.de \ --cc=jacek.anaszewski@gmail.com \ --cc=jingoohan1@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-fbdev@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-pwm@vger.kernel.org \ --cc=linux-rockchip@lists.infradead.org \ --cc=pavel@ucw.cz \ --cc=robh+dt@kernel.org \ --cc=rpurdie@rpsys.net \ --cc=thierry.reding@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.