From: Beniamino Galvani <b.galvani@gmail.com> To: u-boot@lists.denx.de Subject: [U-Boot] [PATCH 1/4] ARM: dts: update gxbb-clkc.h from Linux 4.14 Date: Sun, 3 Dec 2017 10:17:10 +0100 [thread overview] Message-ID: <20171203091713.22029-2-b.galvani@gmail.com> (raw) In-Reply-To: <20171203091713.22029-1-b.galvani@gmail.com> Update gxbb-clkc.h from Linux 4.14 as it contains new clock ids. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> --- include/dt-bindings/clock/gxbb-clkc.h | 75 +++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index e3e9f7919c..8ba99a5e3f 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * GXBB clock tree IDs */ @@ -5,37 +6,96 @@ #ifndef __GXBB_CLKC_H #define __GXBB_CLKC_H +#define CLKID_SYS_PLL 0 #define CLKID_HDMI_PLL 2 +#define CLKID_FIXED_PLL 3 #define CLKID_FCLK_DIV2 4 #define CLKID_FCLK_DIV3 5 #define CLKID_FCLK_DIV4 6 +#define CLKID_FCLK_DIV5 7 +#define CLKID_FCLK_DIV7 8 #define CLKID_GP0_PLL 9 #define CLKID_CLK81 12 +#define CLKID_MPLL0 13 +#define CLKID_MPLL1 14 #define CLKID_MPLL2 15 +#define CLKID_DDR 16 +#define CLKID_DOS 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 #define CLKID_SPICC 21 #define CLKID_I2C 22 #define CLKID_SAR_ADC 23 +#define CLKID_SMART_CARD 24 #define CLKID_RNG0 25 #define CLKID_UART0 26 +#define CLKID_SDHC 27 +#define CLKID_STREAM 28 +#define CLKID_ASYNC_FIFO 29 +#define CLKID_SDIO 30 +#define CLKID_ABUF 31 +#define CLKID_HIU_IFACE 32 +#define CLKID_ASSIST_MISC 33 #define CLKID_SPI 34 #define CLKID_ETH 36 +#define CLKID_I2S_SPDIF 35 +#define CLKID_DEMUX 37 #define CLKID_AIU_GLUE 38 #define CLKID_IEC958 39 #define CLKID_I2S_OUT 40 +#define CLKID_AMCLK 41 +#define CLKID_AIFIFO2 42 +#define CLKID_MIXER 43 #define CLKID_MIXER_IFACE 44 +#define CLKID_ADC 45 +#define CLKID_BLKMV 46 #define CLKID_AIU 47 #define CLKID_UART1 48 +#define CLKID_G2D 49 #define CLKID_USB0 50 #define CLKID_USB1 51 +#define CLKID_RESET 52 +#define CLKID_NAND 53 +#define CLKID_DOS_PARSER 54 #define CLKID_USB 55 +#define CLKID_VDIN1 56 +#define CLKID_AHB_ARB0 57 +#define CLKID_EFUSE 58 +#define CLKID_BOOT_ROM 59 +#define CLKID_AHB_DATA_BUS 60 +#define CLKID_AHB_CTRL_BUS 61 +#define CLKID_HDMI_INTR_SYNC 62 #define CLKID_HDMI_PCLK 63 #define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_MMC_PCLK 66 +#define CLKID_DVIN 67 #define CLKID_UART2 68 #define CLKID_SANA 69 +#define CLKID_VPU_INTR 70 +#define CLKID_SEC_AHB_AHB3_BRIDGE 71 +#define CLKID_CLK81_A53 72 +#define CLKID_VCLK2_VENCI0 73 +#define CLKID_VCLK2_VENCI1 74 +#define CLKID_VCLK2_VENCP0 75 +#define CLKID_VCLK2_VENCP1 76 #define CLKID_GCLK_VENCI_INT0 77 +#define CLKID_GCLK_VENCI_INT 78 +#define CLKID_DAC_CLK 79 #define CLKID_AOCLK_GATE 80 #define CLKID_IEC958_GATE 81 +#define CLKID_ENC480P 82 +#define CLKID_RNG1 83 +#define CLKID_GCLK_VENCI_INT1 84 +#define CLKID_VCLK2_VENCLMCC 85 +#define CLKID_VCLK2_VENCL 86 +#define CLKID_VCLK_OTHER 87 +#define CLKID_EDP 88 +#define CLKID_AO_MEDIA_CPU 89 +#define CLKID_AO_AHB_SRAM 90 +#define CLKID_AO_AHB_BUS 91 +#define CLKID_AO_IFACE 92 #define CLKID_AO_I2C 93 #define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_B 95 @@ -50,5 +110,20 @@ #define CLKID_CTS_AMCLK 107 #define CLKID_CTS_MCLK_I958 110 #define CLKID_CTS_I958 113 +#define CLKID_32K_CLK 114 +#define CLKID_SD_EMMC_A_CLK0 119 +#define CLKID_SD_EMMC_B_CLK0 122 +#define CLKID_SD_EMMC_C_CLK0 125 +#define CLKID_VPU_0_SEL 126 +#define CLKID_VPU_0 128 +#define CLKID_VPU_1_SEL 129 +#define CLKID_VPU_1 131 +#define CLKID_VPU 132 +#define CLKID_VAPB_0_SEL 133 +#define CLKID_VAPB_0 135 +#define CLKID_VAPB_1_SEL 136 +#define CLKID_VAPB_1 138 +#define CLKID_VAPB_SEL 139 +#define CLKID_VAPB 140 #endif /* __GXBB_CLKC_H */ -- 2.14.3
WARNING: multiple messages have this Message-ID (diff)
From: b.galvani@gmail.com (Beniamino Galvani) To: linus-amlogic@lists.infradead.org Subject: [PATCH 1/4] ARM: dts: update gxbb-clkc.h from Linux 4.14 Date: Sun, 3 Dec 2017 10:17:10 +0100 [thread overview] Message-ID: <20171203091713.22029-2-b.galvani@gmail.com> (raw) In-Reply-To: <20171203091713.22029-1-b.galvani@gmail.com> Update gxbb-clkc.h from Linux 4.14 as it contains new clock ids. Signed-off-by: Beniamino Galvani <b.galvani@gmail.com> --- include/dt-bindings/clock/gxbb-clkc.h | 75 +++++++++++++++++++++++++++++++++++ 1 file changed, 75 insertions(+) diff --git a/include/dt-bindings/clock/gxbb-clkc.h b/include/dt-bindings/clock/gxbb-clkc.h index e3e9f7919c..8ba99a5e3f 100644 --- a/include/dt-bindings/clock/gxbb-clkc.h +++ b/include/dt-bindings/clock/gxbb-clkc.h @@ -1,3 +1,4 @@ +/* SPDX-License-Identifier: GPL-2.0 */ /* * GXBB clock tree IDs */ @@ -5,37 +6,96 @@ #ifndef __GXBB_CLKC_H #define __GXBB_CLKC_H +#define CLKID_SYS_PLL 0 #define CLKID_HDMI_PLL 2 +#define CLKID_FIXED_PLL 3 #define CLKID_FCLK_DIV2 4 #define CLKID_FCLK_DIV3 5 #define CLKID_FCLK_DIV4 6 +#define CLKID_FCLK_DIV5 7 +#define CLKID_FCLK_DIV7 8 #define CLKID_GP0_PLL 9 #define CLKID_CLK81 12 +#define CLKID_MPLL0 13 +#define CLKID_MPLL1 14 #define CLKID_MPLL2 15 +#define CLKID_DDR 16 +#define CLKID_DOS 17 +#define CLKID_ISA 18 +#define CLKID_PL301 19 +#define CLKID_PERIPHS 20 #define CLKID_SPICC 21 #define CLKID_I2C 22 #define CLKID_SAR_ADC 23 +#define CLKID_SMART_CARD 24 #define CLKID_RNG0 25 #define CLKID_UART0 26 +#define CLKID_SDHC 27 +#define CLKID_STREAM 28 +#define CLKID_ASYNC_FIFO 29 +#define CLKID_SDIO 30 +#define CLKID_ABUF 31 +#define CLKID_HIU_IFACE 32 +#define CLKID_ASSIST_MISC 33 #define CLKID_SPI 34 #define CLKID_ETH 36 +#define CLKID_I2S_SPDIF 35 +#define CLKID_DEMUX 37 #define CLKID_AIU_GLUE 38 #define CLKID_IEC958 39 #define CLKID_I2S_OUT 40 +#define CLKID_AMCLK 41 +#define CLKID_AIFIFO2 42 +#define CLKID_MIXER 43 #define CLKID_MIXER_IFACE 44 +#define CLKID_ADC 45 +#define CLKID_BLKMV 46 #define CLKID_AIU 47 #define CLKID_UART1 48 +#define CLKID_G2D 49 #define CLKID_USB0 50 #define CLKID_USB1 51 +#define CLKID_RESET 52 +#define CLKID_NAND 53 +#define CLKID_DOS_PARSER 54 #define CLKID_USB 55 +#define CLKID_VDIN1 56 +#define CLKID_AHB_ARB0 57 +#define CLKID_EFUSE 58 +#define CLKID_BOOT_ROM 59 +#define CLKID_AHB_DATA_BUS 60 +#define CLKID_AHB_CTRL_BUS 61 +#define CLKID_HDMI_INTR_SYNC 62 #define CLKID_HDMI_PCLK 63 #define CLKID_USB1_DDR_BRIDGE 64 #define CLKID_USB0_DDR_BRIDGE 65 +#define CLKID_MMC_PCLK 66 +#define CLKID_DVIN 67 #define CLKID_UART2 68 #define CLKID_SANA 69 +#define CLKID_VPU_INTR 70 +#define CLKID_SEC_AHB_AHB3_BRIDGE 71 +#define CLKID_CLK81_A53 72 +#define CLKID_VCLK2_VENCI0 73 +#define CLKID_VCLK2_VENCI1 74 +#define CLKID_VCLK2_VENCP0 75 +#define CLKID_VCLK2_VENCP1 76 #define CLKID_GCLK_VENCI_INT0 77 +#define CLKID_GCLK_VENCI_INT 78 +#define CLKID_DAC_CLK 79 #define CLKID_AOCLK_GATE 80 #define CLKID_IEC958_GATE 81 +#define CLKID_ENC480P 82 +#define CLKID_RNG1 83 +#define CLKID_GCLK_VENCI_INT1 84 +#define CLKID_VCLK2_VENCLMCC 85 +#define CLKID_VCLK2_VENCL 86 +#define CLKID_VCLK_OTHER 87 +#define CLKID_EDP 88 +#define CLKID_AO_MEDIA_CPU 89 +#define CLKID_AO_AHB_SRAM 90 +#define CLKID_AO_AHB_BUS 91 +#define CLKID_AO_IFACE 92 #define CLKID_AO_I2C 93 #define CLKID_SD_EMMC_A 94 #define CLKID_SD_EMMC_B 95 @@ -50,5 +110,20 @@ #define CLKID_CTS_AMCLK 107 #define CLKID_CTS_MCLK_I958 110 #define CLKID_CTS_I958 113 +#define CLKID_32K_CLK 114 +#define CLKID_SD_EMMC_A_CLK0 119 +#define CLKID_SD_EMMC_B_CLK0 122 +#define CLKID_SD_EMMC_C_CLK0 125 +#define CLKID_VPU_0_SEL 126 +#define CLKID_VPU_0 128 +#define CLKID_VPU_1_SEL 129 +#define CLKID_VPU_1 131 +#define CLKID_VPU 132 +#define CLKID_VAPB_0_SEL 133 +#define CLKID_VAPB_0 135 +#define CLKID_VAPB_1_SEL 136 +#define CLKID_VAPB_1 138 +#define CLKID_VAPB_SEL 139 +#define CLKID_VAPB 140 #endif /* __GXBB_CLKC_H */ -- 2.14.3
next prev parent reply other threads:[~2017-12-03 9:17 UTC|newest] Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top 2017-12-03 9:17 [U-Boot] [PATCH 0/4] Meson clock driver Beniamino Galvani 2017-12-03 9:17 ` Beniamino Galvani 2017-12-03 9:17 ` Beniamino Galvani [this message] 2017-12-03 9:17 ` [PATCH 1/4] ARM: dts: update gxbb-clkc.h from Linux 4.14 Beniamino Galvani 2017-12-06 13:38 ` [U-Boot] " Neil Armstrong 2017-12-06 13:38 ` Neil Armstrong 2017-12-03 9:17 ` [U-Boot] [PATCH 2/4] ARM: meson: add clock measurement function Beniamino Galvani 2017-12-03 9:17 ` Beniamino Galvani 2017-12-06 13:40 ` [U-Boot] " Neil Armstrong 2017-12-06 13:40 ` Neil Armstrong 2017-12-11 14:57 ` [U-Boot] " Simon Glass 2017-12-11 14:57 ` Simon Glass 2017-12-03 9:17 ` [U-Boot] [PATCH 3/4] clk: add Amlogic meson clock driver Beniamino Galvani 2017-12-03 9:17 ` Beniamino Galvani 2017-12-06 13:41 ` [U-Boot] " Neil Armstrong 2017-12-06 13:41 ` Neil Armstrong 2017-12-11 14:57 ` [U-Boot] " Simon Glass 2017-12-11 14:57 ` Simon Glass 2018-03-29 8:42 ` [U-Boot] " Neil Armstrong 2018-03-29 8:42 ` Neil Armstrong 2018-03-29 22:41 ` [U-Boot] " Simon Glass 2018-03-29 22:41 ` Simon Glass 2018-03-30 7:53 ` [U-Boot] " Neil Armstrong 2018-03-30 7:53 ` Neil Armstrong 2018-03-30 8:41 ` [U-Boot] " Simon Glass 2018-03-30 8:41 ` Simon Glass 2018-03-30 14:27 ` [U-Boot] " Andreas Färber 2018-03-30 14:27 ` Andreas Färber 2018-03-31 8:44 ` [U-Boot] " Simon Glass 2018-03-31 8:44 ` Simon Glass 2017-12-03 9:17 ` [U-Boot] [PATCH 4/4] meson: use the " Beniamino Galvani 2017-12-03 9:17 ` Beniamino Galvani 2017-12-06 13:43 ` [U-Boot] " Neil Armstrong 2017-12-06 13:43 ` Neil Armstrong 2017-12-11 14:57 ` [U-Boot] " Simon Glass 2017-12-11 14:57 ` Simon Glass 2017-12-13 2:33 ` [U-Boot] [U-Boot,4/4] " Tom Rini 2017-12-13 2:33 ` Tom Rini 2018-03-28 8:59 ` [U-Boot] [PATCH 0/4] Meson " Neil Armstrong 2018-03-28 8:59 ` Neil Armstrong 2018-03-28 10:52 ` [U-Boot] " Beniamino Galvani 2018-03-28 10:52 ` Beniamino Galvani 2018-03-28 13:44 ` [U-Boot] " Neil Armstrong 2018-03-28 13:44 ` Neil Armstrong
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20171203091713.22029-2-b.galvani@gmail.com \ --to=b.galvani@gmail.com \ --cc=u-boot@lists.denx.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.