From: Mathieu Malaterre <malat@debian.org>
To: Rob Herring <robh+dt@kernel.org>
Cc: "Mathieu Malaterre" <malat@debian.org>,
"Benoît Cousson" <bcousson@baylibre.com>,
"Tony Lindgren" <tony@atomide.com>,
"Mark Rutland" <mark.rutland@arm.com>,
"Russell King" <linux@armlinux.org.uk>,
linux-omap@vger.kernel.org, devicetree@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 18/25] arm: am3/am4/dra7/omap: dts: Remove leading 0x and 0s from bindings notation
Date: Fri, 15 Dec 2017 13:46:51 +0100 [thread overview]
Message-ID: <20171215124651.30793-1-malat@debian.org> (raw)
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/am33xx.dtsi | 4 ++--
arch/arm/boot/dts/am3517.dtsi | 4 ++--
arch/arm/boot/dts/am4372.dtsi | 4 ++--
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 ++++----
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 8 ++++----
arch/arm/boot/dts/omap3-evm-37xx.dts | 8 ++++----
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 8 ++++----
8 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d37f95025807..6699fcb77509 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -496,7 +496,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <77>;
@@ -991,7 +991,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 00da3f2c4072..76994165fb3a 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -26,7 +26,7 @@
interrupt-names = "mc";
};
- davinci_emac: ethernet@0x5c000000 {
+ davinci_emac: ethernet@5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
@@ -41,7 +41,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
};
- davinci_mdio: ethernet@0x5c030000 {
+ davinci_mdio: ethernet@5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 4714a59fd86d..5aff7f01a513 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -325,7 +325,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -936,7 +936,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 155eb32ee213..fee0547f7302 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -74,19 +74,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ac9216293b7c..f8f5206130d6 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1373,7 +1373,7 @@
ranges;
reg = <0x4a090000 0x20>;
ti,hwmods = "ocp2scp3";
- sata_phy: phy@4A096000 {
+ sata_phy: phy@4a096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index ab6003fe5a43..9dcb18d22cde 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -306,19 +306,19 @@
label = "xloader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "uboot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "uboot environment";
reg = <0x260000 0x40000>;
};
- partition@0x2a0000 {
+ partition@2a0000 {
label = "linux";
reg = <0x2a0000 0x400000>;
};
- partition@0x6a0000 {
+ partition@6a0000 {
label = "rootfs";
reg = <0x6a0000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 5a4ba0aea447..a14303b09ae2 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -90,19 +90,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 7ada1e93e166..cf7a2a72348d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -405,22 +405,22 @@
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "u-boot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "u-boot-environment";
reg = <0x260000 0x20000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "filesystem";
reg = <0x780000 0xf880000>;
};
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
To: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Cc: "Mathieu Malaterre"
<malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>,
"Benoît Cousson"
<bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
"Tony Lindgren" <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
"Mark Rutland" <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
"Russell King" <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH 18/25] arm: am3/am4/dra7/omap: dts: Remove leading 0x and 0s from bindings notation
Date: Fri, 15 Dec 2017 13:46:51 +0100 [thread overview]
Message-ID: <20171215124651.30793-1-malat@debian.org> (raw)
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney-M3mlKVOIwJVv6pq1l3V1OdBPR1lH4CV8@public.gmane.org>
Suggested-by: Rob Herring <robh-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>
Signed-off-by: Mathieu Malaterre <malat-8fiUuRrzOP0dnm+yROfE0A@public.gmane.org>
---
arch/arm/boot/dts/am33xx.dtsi | 4 ++--
arch/arm/boot/dts/am3517.dtsi | 4 ++--
arch/arm/boot/dts/am4372.dtsi | 4 ++--
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 ++++----
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 8 ++++----
arch/arm/boot/dts/omap3-evm-37xx.dts | 8 ++++----
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 8 ++++----
8 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d37f95025807..6699fcb77509 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -496,7 +496,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <77>;
@@ -991,7 +991,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 00da3f2c4072..76994165fb3a 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -26,7 +26,7 @@
interrupt-names = "mc";
};
- davinci_emac: ethernet@0x5c000000 {
+ davinci_emac: ethernet@5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
@@ -41,7 +41,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
};
- davinci_mdio: ethernet@0x5c030000 {
+ davinci_mdio: ethernet@5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 4714a59fd86d..5aff7f01a513 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -325,7 +325,7 @@
status = "disabled";
};
- mailbox: mailbox@480C8000 {
+ mailbox: mailbox@480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -936,7 +936,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp@4803C000 {
+ mcasp1: mcasp@4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 155eb32ee213..fee0547f7302 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -74,19 +74,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ac9216293b7c..f8f5206130d6 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1373,7 +1373,7 @@
ranges;
reg = <0x4a090000 0x20>;
ti,hwmods = "ocp2scp3";
- sata_phy: phy@4A096000 {
+ sata_phy: phy@4a096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index ab6003fe5a43..9dcb18d22cde 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -306,19 +306,19 @@
label = "xloader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "uboot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "uboot environment";
reg = <0x260000 0x40000>;
};
- partition@0x2a0000 {
+ partition@2a0000 {
label = "linux";
reg = <0x2a0000 0x400000>;
};
- partition@0x6a0000 {
+ partition@6a0000 {
label = "rootfs";
reg = <0x6a0000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 5a4ba0aea447..a14303b09ae2 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -90,19 +90,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition@0x1c0000 {
+ partition@1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "Filesystem";
reg = <0x780000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 7ada1e93e166..cf7a2a72348d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -405,22 +405,22 @@
reg = <0 0x80000>;
};
- partition@0x80000 {
+ partition@80000 {
label = "u-boot";
reg = <0x80000 0x1e0000>;
};
- partition@0x260000 {
+ partition@260000 {
label = "u-boot-environment";
reg = <0x260000 0x20000>;
};
- partition@0x280000 {
+ partition@280000 {
label = "kernel";
reg = <0x280000 0x500000>;
};
- partition@0x780000 {
+ partition@780000 {
label = "filesystem";
reg = <0x780000 0xf880000>;
};
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: malat@debian.org (Mathieu Malaterre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 18/25] arm: am3/am4/dra7/omap: dts: Remove leading 0x and 0s from bindings notation
Date: Fri, 15 Dec 2017 13:46:51 +0100 [thread overview]
Message-ID: <20171215124651.30793-1-malat@debian.org> (raw)
Improve the DTS files by removing all the leading "0x" and zeros to fix the
following dtc warnings:
Warning (unit_address_format): Node /XXX unit name should not have leading "0x"
and
Warning (unit_address_format): Node /XXX unit name should not have leading 0s
Converted using the following command:
find . -type f \( -iname *.dts -o -iname *.dtsi \) -exec sed -i -e "s/@\([0-9a-fA-FxX\.;:#]+\)\s*{/@\L\1 {/g" -e "s/@0x\(.*\) {/@\1 {/g" -e "s/@0+\(.*\) {/@\1 {/g" {} +^C
For simplicity, two sed expressions were used to solve each warnings separately.
To make the regex expression more robust a few other issues were resolved,
namely setting unit-address to lower case, and adding a whitespace before the
the opening curly brace:
https://elinux.org/Device_Tree_Linux#Linux_conventions
This will solve as a side effect warning:
Warning (simple_bus_reg): Node /XXX@<UPPER> simple-bus unit address format error, expected "<lower>"
This is a follow up to commit 4c9847b7375a ("dt-bindings: Remove leading 0x from bindings notation")
Reported-by: David Daney <ddaney@caviumnetworks.com>
Suggested-by: Rob Herring <robh@kernel.org>
Signed-off-by: Mathieu Malaterre <malat@debian.org>
---
arch/arm/boot/dts/am33xx.dtsi | 4 ++--
arch/arm/boot/dts/am3517.dtsi | 4 ++--
arch/arm/boot/dts/am4372.dtsi | 4 ++--
arch/arm/boot/dts/dra62x-j5eco-evm.dts | 8 ++++----
arch/arm/boot/dts/dra7.dtsi | 2 +-
arch/arm/boot/dts/omap3-cm-t3x.dtsi | 8 ++++----
arch/arm/boot/dts/omap3-evm-37xx.dts | 8 ++++----
arch/arm/boot/dts/omap3-lilly-a83x.dtsi | 8 ++++----
8 files changed, 23 insertions(+), 23 deletions(-)
diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi
index d37f95025807..6699fcb77509 100644
--- a/arch/arm/boot/dts/am33xx.dtsi
+++ b/arch/arm/boot/dts/am33xx.dtsi
@@ -496,7 +496,7 @@
status = "disabled";
};
- mailbox: mailbox at 480C8000 {
+ mailbox: mailbox at 480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <77>;
@@ -991,7 +991,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp at 4803C000 {
+ mcasp1: mcasp at 4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/am3517.dtsi b/arch/arm/boot/dts/am3517.dtsi
index 00da3f2c4072..76994165fb3a 100644
--- a/arch/arm/boot/dts/am3517.dtsi
+++ b/arch/arm/boot/dts/am3517.dtsi
@@ -26,7 +26,7 @@
interrupt-names = "mc";
};
- davinci_emac: ethernet at 0x5c000000 {
+ davinci_emac: ethernet at 5c000000 {
compatible = "ti,am3517-emac";
ti,hwmods = "davinci_emac";
status = "disabled";
@@ -41,7 +41,7 @@
local-mac-address = [ 00 00 00 00 00 00 ];
};
- davinci_mdio: ethernet at 0x5c030000 {
+ davinci_mdio: ethernet at 5c030000 {
compatible = "ti,davinci_mdio";
ti,hwmods = "davinci_mdio";
status = "disabled";
diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi
index 4714a59fd86d..5aff7f01a513 100644
--- a/arch/arm/boot/dts/am4372.dtsi
+++ b/arch/arm/boot/dts/am4372.dtsi
@@ -325,7 +325,7 @@
status = "disabled";
};
- mailbox: mailbox at 480C8000 {
+ mailbox: mailbox at 480c8000 {
compatible = "ti,omap4-mailbox";
reg = <0x480C8000 0x200>;
interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
@@ -936,7 +936,7 @@
dma-names = "tx", "rx";
};
- mcasp1: mcasp at 4803C000 {
+ mcasp1: mcasp at 4803c000 {
compatible = "ti,am33xx-mcasp-audio";
ti,hwmods = "mcasp1";
reg = <0x4803C000 0x2000>,
diff --git a/arch/arm/boot/dts/dra62x-j5eco-evm.dts b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
index 155eb32ee213..fee0547f7302 100644
--- a/arch/arm/boot/dts/dra62x-j5eco-evm.dts
+++ b/arch/arm/boot/dts/dra62x-j5eco-evm.dts
@@ -74,19 +74,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition at 0x80000 {
+ partition at 80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition at 0x1c0000 {
+ partition at 1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition at 0x280000 {
+ partition at 280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition at 0x780000 {
+ partition at 780000 {
label = "Filesystem";
reg = <0x780000 0xf880000>;
};
diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi
index ac9216293b7c..f8f5206130d6 100644
--- a/arch/arm/boot/dts/dra7.dtsi
+++ b/arch/arm/boot/dts/dra7.dtsi
@@ -1373,7 +1373,7 @@
ranges;
reg = <0x4a090000 0x20>;
ti,hwmods = "ocp2scp3";
- sata_phy: phy at 4A096000 {
+ sata_phy: phy at 4a096000 {
compatible = "ti,phy-pipe3-sata";
reg = <0x4A096000 0x80>, /* phy_rx */
<0x4A096400 0x64>, /* phy_tx */
diff --git a/arch/arm/boot/dts/omap3-cm-t3x.dtsi b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
index ab6003fe5a43..9dcb18d22cde 100644
--- a/arch/arm/boot/dts/omap3-cm-t3x.dtsi
+++ b/arch/arm/boot/dts/omap3-cm-t3x.dtsi
@@ -306,19 +306,19 @@
label = "xloader";
reg = <0 0x80000>;
};
- partition at 0x80000 {
+ partition at 80000 {
label = "uboot";
reg = <0x80000 0x1e0000>;
};
- partition at 0x260000 {
+ partition at 260000 {
label = "uboot environment";
reg = <0x260000 0x40000>;
};
- partition at 0x2a0000 {
+ partition at 2a0000 {
label = "linux";
reg = <0x2a0000 0x400000>;
};
- partition at 0x6a0000 {
+ partition at 6a0000 {
label = "rootfs";
reg = <0x6a0000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-evm-37xx.dts b/arch/arm/boot/dts/omap3-evm-37xx.dts
index 5a4ba0aea447..a14303b09ae2 100644
--- a/arch/arm/boot/dts/omap3-evm-37xx.dts
+++ b/arch/arm/boot/dts/omap3-evm-37xx.dts
@@ -90,19 +90,19 @@
label = "X-Loader";
reg = <0 0x80000>;
};
- partition at 0x80000 {
+ partition at 80000 {
label = "U-Boot";
reg = <0x80000 0x1c0000>;
};
- partition at 0x1c0000 {
+ partition at 1c0000 {
label = "Environment";
reg = <0x240000 0x40000>;
};
- partition at 0x280000 {
+ partition at 280000 {
label = "Kernel";
reg = <0x280000 0x500000>;
};
- partition at 0x780000 {
+ partition at 780000 {
label = "Filesystem";
reg = <0x780000 0x1f880000>;
};
diff --git a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
index 7ada1e93e166..cf7a2a72348d 100644
--- a/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
+++ b/arch/arm/boot/dts/omap3-lilly-a83x.dtsi
@@ -405,22 +405,22 @@
reg = <0 0x80000>;
};
- partition at 0x80000 {
+ partition at 80000 {
label = "u-boot";
reg = <0x80000 0x1e0000>;
};
- partition at 0x260000 {
+ partition at 260000 {
label = "u-boot-environment";
reg = <0x260000 0x20000>;
};
- partition at 0x280000 {
+ partition at 280000 {
label = "kernel";
reg = <0x280000 0x500000>;
};
- partition at 0x780000 {
+ partition at 780000 {
label = "filesystem";
reg = <0x780000 0xf880000>;
};
--
2.11.0
next reply other threads:[~2017-12-15 12:50 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-15 12:46 Mathieu Malaterre [this message]
2017-12-15 12:46 ` [PATCH 18/25] arm: am3/am4/dra7/omap: dts: Remove leading 0x and 0s from bindings notation Mathieu Malaterre
2017-12-15 12:46 ` Mathieu Malaterre
2017-12-15 16:39 ` Tony Lindgren
2017-12-15 16:39 ` Tony Lindgren
2017-12-15 16:39 ` Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171215124651.30793-1-malat@debian.org \
--to=malat@debian.org \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.