From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tony Lindgren <tony@atomide.com>, <bcousson@baylibre.com>
Cc: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>, <linux-pci@vger.kernel.org>,
<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
<linux-omap@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>, <nsekhar@ti.com>,
<kishon@ti.com>
Subject: [PATCH 7/7] ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Date: Tue, 19 Dec 2017 15:01:33 +0530 [thread overview]
Message-ID: <20171219093133.16565-8-kishon@ti.com> (raw)
In-Reply-To: <20171219093133.16565-1-kishon@ti.com>
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/configs/multi_v7_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 61509c4b769f..6faecd55ccbd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -116,6 +116,8 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_PCI=y
CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_DRA7XX=y
+CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
@@ -123,6 +125,9 @@ CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
@@ -222,6 +227,7 @@ CONFIG_ATMEL_SSC=m
CONFIG_QCOM_COINCELL=m
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
+CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
--
2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
To: Tony Lindgren <tony-4v6yS6AI5VpBDgjK7y7TUQ@public.gmane.org>,
bcousson-rdvid1DuHRBWk0Htik3J/w@public.gmane.org
Cc: Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
Russell King <linux-I+IVW8TIWO2tmTQ+vhA3Yw@public.gmane.org>,
linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
nsekhar-l0cyMroinI0@public.gmane.org,
kishon-l0cyMroinI0@public.gmane.org
Subject: [PATCH 7/7] ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Date: Tue, 19 Dec 2017 15:01:33 +0530 [thread overview]
Message-ID: <20171219093133.16565-8-kishon@ti.com> (raw)
In-Reply-To: <20171219093133.16565-1-kishon-l0cyMroinI0@public.gmane.org>
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: Kishon Vijay Abraham I <kishon-l0cyMroinI0@public.gmane.org>
---
arch/arm/configs/multi_v7_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 61509c4b769f..6faecd55ccbd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -116,6 +116,8 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_PCI=y
CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_DRA7XX=y
+CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
@@ -123,6 +125,9 @@ CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
@@ -222,6 +227,7 @@ CONFIG_ATMEL_SSC=m
CONFIG_QCOM_COINCELL=m
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
+CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
--
2.11.0
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: Tony Lindgren <tony@atomide.com>, <bcousson@baylibre.com>
Cc: Mark Rutland <mark.rutland@arm.com>,
devicetree@vger.kernel.org, kishon@ti.com,
linux-pci@vger.kernel.org, nsekhar@ti.com,
Russell King <linux@armlinux.org.uk>,
linux-kernel@vger.kernel.org, Rob Herring <robh+dt@kernel.org>,
linux-omap@vger.kernel.org, linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Date: Tue, 19 Dec 2017 15:01:33 +0530 [thread overview]
Message-ID: <20171219093133.16565-8-kishon@ti.com> (raw)
In-Reply-To: <20171219093133.16565-1-kishon@ti.com>
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/configs/multi_v7_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 61509c4b769f..6faecd55ccbd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -116,6 +116,8 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_PCI=y
CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_DRA7XX=y
+CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
@@ -123,6 +125,9 @@ CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
@@ -222,6 +227,7 @@ CONFIG_ATMEL_SSC=m
CONFIG_QCOM_COINCELL=m
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
+CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
--
2.11.0
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: kishon@ti.com (Kishon Vijay Abraham I)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] ARM: multi_v7_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes)
Date: Tue, 19 Dec 2017 15:01:33 +0530 [thread overview]
Message-ID: <20171219093133.16565-8-kishon@ti.com> (raw)
In-Reply-To: <20171219093133.16565-1-kishon@ti.com>
Enable CONFIG_PCI_DRA7XX in order to be able to configure PCIe
controller present in dra7 SoCs in both host mode and device mode.
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
arch/arm/configs/multi_v7_defconfig | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index 61509c4b769f..6faecd55ccbd 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -116,6 +116,8 @@ CONFIG_ARCH_ZYNQ=y
CONFIG_TRUSTED_FOUNDATIONS=y
CONFIG_PCI=y
CONFIG_PCI_HOST_GENERIC=y
+CONFIG_PCI_DRA7XX=y
+CONFIG_PCI_DRA7XX_EP=y
CONFIG_PCI_KEYSTONE=y
CONFIG_PCI_MSI=y
CONFIG_PCI_MVEBU=y
@@ -123,6 +125,9 @@ CONFIG_PCI_TEGRA=y
CONFIG_PCI_RCAR_GEN2=y
CONFIG_PCIE_RCAR=y
CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_ENDPOINT=y
+CONFIG_PCI_ENDPOINT_CONFIGFS=y
+CONFIG_PCI_EPF_TEST=m
CONFIG_SMP=y
CONFIG_NR_CPUS=16
CONFIG_HIGHPTE=y
@@ -222,6 +227,7 @@ CONFIG_ATMEL_SSC=m
CONFIG_QCOM_COINCELL=m
CONFIG_APDS9802ALS=y
CONFIG_ISL29003=y
+CONFIG_PCI_ENDPOINT_TEST=m
CONFIG_EEPROM_AT24=y
CONFIG_BLK_DEV_SD=y
CONFIG_BLK_DEV_SR=y
--
2.11.0
next prev parent reply other threads:[~2017-12-19 9:32 UTC|newest]
Thread overview: 42+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 9:31 [PATCH 0/7] ARM: dts: dra7: Enable x2 lane mode support Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` [PATCH 1/7] ARM: dts: dra7: Add properties to enable PCIe x2 lane mode Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` [PATCH 2/7] ARM: dts: DRA74x: Use PCIe compatible specific to dra74 Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` [PATCH 3/7] ARM: dts: DRA72x: Use PCIe compatible specific to dra72 Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` [PATCH 4/7] ARM: dts: dra76-evm: Enable x2 PCIe lanes Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` [PATCH 5/7] ARM: dts: dra7: Remove deprecated PCI compatible string Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` [PATCH 6/7] ARM: omap2plus_defconfig: Enable CONFIG_PCI_DRA7XX (Host & Device modes) Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I [this message]
2017-12-19 9:31 ` [PATCH 7/7] ARM: multi_v7_defconfig: " Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-19 9:31 ` Kishon Vijay Abraham I
2017-12-21 15:13 ` [PATCH 0/7] ARM: dts: dra7: Enable x2 lane mode support Tony Lindgren
2017-12-21 15:13 ` Tony Lindgren
2017-12-21 15:13 ` Tony Lindgren
2018-03-07 12:08 ` Lorenzo Pieralisi
2018-03-07 12:08 ` Lorenzo Pieralisi
2018-03-07 12:08 ` Lorenzo Pieralisi
2018-03-07 12:27 ` Kishon Vijay Abraham I
2018-03-07 12:27 ` Kishon Vijay Abraham I
2018-03-07 12:27 ` Kishon Vijay Abraham I
2018-03-07 12:27 ` Kishon Vijay Abraham I
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219093133.16565-8-kishon@ti.com \
--to=kishon@ti.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.