From: Philippe Cornu <philippe.cornu@st.com>
To: Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
"Russell King" <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
"Archit Taneja" <architt@codeaurora.org>,
Andrzej Hajda <a.hajda@samsung.com>,
"Laurent Pinchart" <Laurent.pinchart@ideasonboard.com>,
David Airlie <airlied@linux.ie>,
Philippe Cornu <philippe.cornu@st.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Benjamin Gaignard <benjamin.gaignard@linaro.org>,
Bhumika Goyal <bhumirks@gmail.com>, <devicetree@vger.kernel.org>,
<linux-arm-kernel@lists.infradead.org>,
<dri-devel@lists.freedesktop.org>, <linux-kernel@vger.kernel.org>
Cc: Yannick Fertre <yannick.fertre@st.com>,
Vincent Abriou <vincent.abriou@st.com>,
Alexandre Torgue <alexandre.torgue@st.com>,
"Maxime Coquelin" <mcoquelin.stm32@gmail.com>,
Gabriel Fernandez <gabriel.fernandez@st.com>,
Ludovic Barre <ludovic.barre@st.com>,
"Fabien Dessenne" <fabien.dessenne@st.com>,
Mickael Reulier <mickael.reulier@st.com>
Subject: [PATCH v2] dt-bindings: display: stm32: add pixel clock mandatory property
Date: Fri, 12 Jan 2018 16:30:34 +0100 [thread overview]
Message-ID: <20180112153034.20353-1-philippe.cornu@st.com> (raw)
Add the DPI/RGB input pixel clock in mandatory properties
because it really offers a better preciseness for timing
computations.
Note: Fix also the DSI panel example where "ref" & "pclk"
clocks were swapped.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
Changes in v2: put new clock in last position (Rob Herring)
Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 029252253ad4..942b7237ae87 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -29,6 +29,7 @@ Mandatory properties specific to STM32 DSI:
- compatible: "st,stm32-dsi".
- clock-names:
- phy pll reference clock string name, must be "ref".
+ - DPI/RGB input pixel clock string name, must be "px_clk".
- resets: see [5].
- reset-names: see [5].
@@ -97,8 +98,9 @@ Example 2: DSI panel
#size-cells = <0>;
compatible = "st,stm32-dsi";
reg = <0x40016c00 0x800>;
- clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
- clock-names = "ref", "pclk";
+ clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>,
+ <&rcc 1 CLK_LCD>;
+ clock-names = "pclk", "ref", "px_clk";
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
reset-names = "apb";
--
2.15.1
WARNING: multiple messages have this Message-ID (diff)
From: Philippe Cornu <philippe.cornu@st.com>
To: Rob Herring <robh+dt@kernel.org>, Arnd Bergmann <arnd@arndb.de>,
Russell King <linux@armlinux.org.uk>,
Mark Rutland <mark.rutland@arm.com>,
Archit Taneja <architt@codeaurora.org>,
Andrzej Hajda <a.hajda@samsung.com>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
David Airlie <airlied@linux.ie>,
Philippe Cornu <philippe.cornu@st.com>,
Philipp Zabel <p.zabel@pengutronix.de>,
Benjamin Gaignard <benjamin.gaignard@linaro.org>,
Bhumika Goyal <bhumirks@gmail.com>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Cc: Alexandre Torgue <alexandre.torgue@st.com>,
Fabien Dessenne <fabien.dessenne@st.com>,
Yannick Fertre <yannick.fertre@st.com>,
Maxime Coquelin <mcoquelin.stm32@gmail.com>,
Mickael Reulier <mickael.reulier@st.com>,
Vincent Abriou <vincent.abriou@st.com>,
Gabriel Fernandez <gabriel.fernandez@st.com>,
Ludovic Barre <ludovic.barre@st.com>
Subject: [PATCH v2] dt-bindings: display: stm32: add pixel clock mandatory property
Date: Fri, 12 Jan 2018 16:30:34 +0100 [thread overview]
Message-ID: <20180112153034.20353-1-philippe.cornu@st.com> (raw)
Add the DPI/RGB input pixel clock in mandatory properties
because it really offers a better preciseness for timing
computations.
Note: Fix also the DSI panel example where "ref" & "pclk"
clocks were swapped.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
Changes in v2: put new clock in last position (Rob Herring)
Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 029252253ad4..942b7237ae87 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -29,6 +29,7 @@ Mandatory properties specific to STM32 DSI:
- compatible: "st,stm32-dsi".
- clock-names:
- phy pll reference clock string name, must be "ref".
+ - DPI/RGB input pixel clock string name, must be "px_clk".
- resets: see [5].
- reset-names: see [5].
@@ -97,8 +98,9 @@ Example 2: DSI panel
#size-cells = <0>;
compatible = "st,stm32-dsi";
reg = <0x40016c00 0x800>;
- clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
- clock-names = "ref", "pclk";
+ clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>,
+ <&rcc 1 CLK_LCD>;
+ clock-names = "pclk", "ref", "px_clk";
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
reset-names = "apb";
--
2.15.1
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: philippe.cornu@st.com (Philippe Cornu)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2] dt-bindings: display: stm32: add pixel clock mandatory property
Date: Fri, 12 Jan 2018 16:30:34 +0100 [thread overview]
Message-ID: <20180112153034.20353-1-philippe.cornu@st.com> (raw)
Add the DPI/RGB input pixel clock in mandatory properties
because it really offers a better preciseness for timing
computations.
Note: Fix also the DSI panel example where "ref" & "pclk"
clocks were swapped.
Signed-off-by: Philippe Cornu <philippe.cornu@st.com>
---
Changes in v2: put new clock in last position (Rob Herring)
Documentation/devicetree/bindings/display/st,stm32-ltdc.txt | 6 ++++--
1 file changed, 4 insertions(+), 2 deletions(-)
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
index 029252253ad4..942b7237ae87 100644
--- a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -29,6 +29,7 @@ Mandatory properties specific to STM32 DSI:
- compatible: "st,stm32-dsi".
- clock-names:
- phy pll reference clock string name, must be "ref".
+ - DPI/RGB input pixel clock string name, must be "px_clk".
- resets: see [5].
- reset-names: see [5].
@@ -97,8 +98,9 @@ Example 2: DSI panel
#size-cells = <0>;
compatible = "st,stm32-dsi";
reg = <0x40016c00 0x800>;
- clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>;
- clock-names = "ref", "pclk";
+ clocks = <&rcc 1 CLK_F469_DSI>, <&clk_hse>,
+ <&rcc 1 CLK_LCD>;
+ clock-names = "pclk", "ref", "px_clk";
resets = <&rcc STM32F4_APB2_RESET(DSI)>;
reset-names = "apb";
--
2.15.1
next reply other threads:[~2018-01-12 15:32 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-01-12 15:30 Philippe Cornu [this message]
2018-01-12 15:30 ` [PATCH v2] dt-bindings: display: stm32: add pixel clock mandatory property Philippe Cornu
2018-01-12 15:30 ` Philippe Cornu
2018-01-19 22:43 ` Rob Herring
2018-01-19 22:43 ` Rob Herring
2018-01-19 22:43 ` Rob Herring
2018-01-21 21:15 ` Philippe CORNU
2018-01-21 21:15 ` Philippe CORNU
2018-01-21 21:15 ` Philippe CORNU
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180112153034.20353-1-philippe.cornu@st.com \
--to=philippe.cornu@st.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=a.hajda@samsung.com \
--cc=airlied@linux.ie \
--cc=alexandre.torgue@st.com \
--cc=architt@codeaurora.org \
--cc=arnd@arndb.de \
--cc=benjamin.gaignard@linaro.org \
--cc=bhumirks@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=fabien.dessenne@st.com \
--cc=gabriel.fernandez@st.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=ludovic.barre@st.com \
--cc=mark.rutland@arm.com \
--cc=mcoquelin.stm32@gmail.com \
--cc=mickael.reulier@st.com \
--cc=p.zabel@pengutronix.de \
--cc=robh+dt@kernel.org \
--cc=vincent.abriou@st.com \
--cc=yannick.fertre@st.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.