All of lore.kernel.org
 help / color / mirror / Atom feed
From: Archit Taneja <architt@codeaurora.org>
To: robdclark@gmail.com
Cc: linux-arm-msm@vger.kernel.org, dri-devel@lists.freedesktop.org
Subject: [PATCH] rnndb: dsi: Add DSI 10nm PLL/PHY registers
Date: Wed, 17 Jan 2018 11:27:15 +0530	[thread overview]
Message-ID: <20180117055715.5874-1-architt@codeaurora.org> (raw)

Signed-off-by: Archit Taneja <architt@codeaurora.org>
---
 rnndb/dsi/dsi.xml | 95 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/rnndb/dsi/dsi.xml b/rnndb/dsi/dsi.xml
index c7052378..fdcc2d3e 100644
--- a/rnndb/dsi/dsi.xml
+++ b/rnndb/dsi/dsi.xml
@@ -814,4 +814,99 @@ xsi:schemaLocation="http://nouveau.freedesktop.org/ rules-ng.xsd">
 	<reg32 offset="0x108" name="PLL_BANDGAP"/>
 </domain>
 
+<domain name="DSI_10nm_PHY_CMN" width="32">
+	<reg32 offset="0x00000" name="REVISION_ID0"/>
+	<reg32 offset="0x00004" name="REVISION_ID1"/>
+	<reg32 offset="0x00008" name="REVISION_ID2"/>
+	<reg32 offset="0x0000c" name="REVISION_ID3"/>
+	<reg32 offset="0x00010" name="CLK_CFG0"/>
+	<reg32 offset="0x00014" name="CLK_CFG1"/>
+	<reg32 offset="0x00018" name="GLBL_CTRL"/>
+	<reg32 offset="0x0001c" name="RBUF_CTRL"/>
+	<reg32 offset="0x00020" name="VREG_CTRL"/>
+	<reg32 offset="0x00024" name="CTRL_0"/>
+	<reg32 offset="0x00028" name="CTRL_1"/>
+	<reg32 offset="0x0002c" name="CTRL_2"/>
+	<reg32 offset="0x00030" name="LANE_CFG0"/>
+	<reg32 offset="0x00034" name="LANE_CFG1"/>
+	<reg32 offset="0x00038" name="PLL_CNTRL"/>
+	<reg32 offset="0x00098" name="LANE_CTRL0"/>
+	<reg32 offset="0x0009c" name="LANE_CTRL1"/>
+	<reg32 offset="0x000a0" name="LANE_CTRL2"/>
+	<reg32 offset="0x000a4" name="LANE_CTRL3"/>
+	<reg32 offset="0x000a8" name="LANE_CTRL4"/>
+	<reg32 offset="0x000ac" name="TIMING_CTRL_0"/>
+	<reg32 offset="0x000b0" name="TIMING_CTRL_1"/>
+	<reg32 offset="0x000b4" name="TIMING_CTRL_2"/>
+	<reg32 offset="0x000b8" name="TIMING_CTRL_3"/>
+	<reg32 offset="0x000bc" name="TIMING_CTRL_4"/>
+	<reg32 offset="0x000c0" name="TIMING_CTRL_5"/>
+	<reg32 offset="0x000c4" name="TIMING_CTRL_6"/>
+	<reg32 offset="0x000c8" name="TIMING_CTRL_7"/>
+	<reg32 offset="0x000cc" name="TIMING_CTRL_8"/>
+	<reg32 offset="0x000d0" name="TIMING_CTRL_9"/>
+	<reg32 offset="0x000d4" name="TIMING_CTRL_10"/>
+	<reg32 offset="0x000d8" name="TIMING_CTRL_11"/>
+	<reg32 offset="0x000ec" name="PHY_STATUS"/>
+	<reg32 offset="0x000f4" name="LANE_STATUS0"/>
+	<reg32 offset="0x000f8" name="LANE_STATUS1"/>
+</domain>
+
+<domain name="DSI_10nm_PHY" width="32">
+	<array offset="0x00000" name="LN" length="5" stride="0x80">
+		<reg32 offset="0x00" name="CFG0"/>
+		<reg32 offset="0x04" name="CFG1"/>
+		<reg32 offset="0x08" name="CFG2"/>
+		<reg32 offset="0x0c" name="CFG3"/>
+		<reg32 offset="0x10" name="TEST_DATAPATH"/>
+		<reg32 offset="0x14" name="PIN_SWAP"/>
+		<reg32 offset="0x18" name="HSTX_STR_CTRL"/>
+		<reg32 offset="0x1c" name="OFFSET_TOP_CTRL"/>
+		<reg32 offset="0x20" name="OFFSET_BOT_CTRL"/>
+		<reg32 offset="0x24" name="LPTX_STR_CTRL"/>
+		<reg32 offset="0x28" name="LPRX_CTRL"/>
+		<reg32 offset="0x2c" name="TX_DCTRL"/>
+	</array>
+</domain>
+
+<domain name="DSI_10nm_PHY_PLL" width="32">
+	<reg32 offset="0x0000" name="ANALOG_CONTROLS_ONE"/>
+	<reg32 offset="0x0004" name="ANALOG_CONTROLS_TWO"/>
+	<reg32 offset="0x0010" name="ANALOG_CONTROLS_THREE"/>
+	<reg32 offset="0x001c" name="DSM_DIVIDER"/>
+	<reg32 offset="0x0020" name="FEEDBACK_DIVIDER"/>
+	<reg32 offset="0x0024" name="SYSTEM_MUXES"/>
+	<reg32 offset="0x002c" name="CMODE"/>
+	<reg32 offset="0x0030" name="CALIBRATION_SETTINGS"/>
+	<reg32 offset="0x0054" name="BAND_SEL_CAL_SETTINGS_THREE"/>
+	<reg32 offset="0x0064" name="FREQ_DETECT_SETTINGS_ONE"/>
+	<reg32 offset="0x007c" name="PFILT"/>
+	<reg32 offset="0x0080" name="IFILT"/>
+	<reg32 offset="0x0094" name="OUTDIV"/>
+	<reg32 offset="0x00a4" name="CORE_OVERRIDE"/>
+	<reg32 offset="0x00a8" name="CORE_INPUT_OVERRIDE"/>
+	<reg32 offset="0x00b4" name="PLL_DIGITAL_TIMERS_TWO"/>
+	<reg32 offset="0x00cc" name="DECIMAL_DIV_START_1"/>
+	<reg32 offset="0x00d0" name="FRAC_DIV_START_LOW_1"/>
+	<reg32 offset="0x00d4" name="FRAC_DIV_START_MID_1"/>
+	<reg32 offset="0x00d8" name="FRAC_DIV_START_HIGH_1"/>
+	<reg32 offset="0x010c" name="SSC_STEPSIZE_LOW_1"/>
+	<reg32 offset="0x0110" name="SSC_STEPSIZE_HIGH_1"/>
+	<reg32 offset="0x0114" name="SSC_DIV_PER_LOW_1"/>
+	<reg32 offset="0x0118" name="SSC_DIV_PER_HIGH_1"/>
+	<reg32 offset="0x011c" name="SSC_DIV_ADJPER_LOW_1"/>
+	<reg32 offset="0x0120" name="SSC_DIV_ADJPER_HIGH_1"/>
+	<reg32 offset="0x013c" name="SSC_CONTROL"/>
+	<reg32 offset="0x0140" name="PLL_OUTDIV_RATE"/>
+	<reg32 offset="0x0144" name="PLL_LOCKDET_RATE_1"/>
+	<reg32 offset="0x014c" name="PLL_PROP_GAIN_RATE_1"/>
+	<reg32 offset="0x0154" name="PLL_BAND_SET_RATE_1"/>
+	<reg32 offset="0x015c" name="PLL_INT_GAIN_IFILT_BAND_1"/>
+	<reg32 offset="0x0164" name="PLL_FL_INT_GAIN_PFILT_BAND_1"/>
+	<reg32 offset="0x0180" name="PLL_LOCK_OVERRIDE"/>
+	<reg32 offset="0x0184" name="PLL_LOCK_DELAY"/>
+	<reg32 offset="0x018c" name="CLOCK_INVERTERS"/>
+	<reg32 offset="0x01a0" name="COMMON_STATUS_ONE"/>
+</domain>
+
 </database>
-- 
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum,
hosted by The Linux Foundation

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

                 reply	other threads:[~2018-01-17  5:57 UTC|newest]

Thread overview: [no followups] expand[flat|nested]  mbox.gz  Atom feed

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180117055715.5874-1-architt@codeaurora.org \
    --to=architt@codeaurora.org \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=robdclark@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.