All of lore.kernel.org
 help / color / mirror / Atom feed
From: Tobias Schramm <tobleminer@gmail.com>
To: ath10k@lists.infradead.org, kvalo@qca.qualcomm.com
Cc: Tobias Schramm <tobleminer@gmail.com>
Subject: [PATCH 2/2] ath10k: Add support for Uiquiti rebranded QCA988X v2
Date: Wed, 24 Jan 2018 20:42:18 +0100	[thread overview]
Message-ID: <20180124194218.11408-3-tobleminer@gmail.com> (raw)
In-Reply-To: <20180124194218.11408-1-tobleminer@gmail.com>

Some modern Ubiquiti devices contain a rebranded QCA988X rev2 with
a custom Ubiquiti vendor and device id. This patch adds support for
those devices, treating them as a QCA988X v2.

Signed-off-by: Tobias Schramm <tobleminer@gmail.com>
---
 drivers/net/wireless/ath/ath10k/core.c | 24 ++++++++++++++++++++++++
 drivers/net/wireless/ath/ath10k/hw.h   |  1 +
 drivers/net/wireless/ath/ath10k/pci.c  |  4 ++++
 3 files changed, 29 insertions(+)

diff --git a/drivers/net/wireless/ath/ath10k/core.c b/drivers/net/wireless/ath/ath10k/core.c
index b29fdbd21ead..9fb38f2c1d6e 100644
--- a/drivers/net/wireless/ath/ath10k/core.c
+++ b/drivers/net/wireless/ath/ath10k/core.c
@@ -52,6 +52,30 @@ MODULE_PARM_DESC(cryptmode, "Crypto mode: 0-hardware, 1-software");
 MODULE_PARM_DESC(rawmode, "Use raw 802.11 frame datapath");
 
 static const struct ath10k_hw_params ath10k_hw_params_list[] = {
+	{
+		.id = QCA988X_HW_2_0_VERSION,
+		.dev_id = QCA988X_2_0_DEVICE_ID_UBNT,
+		.name = "qca988x hw2.0",
+		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
+		.uart_pin = 7,
+		.cc_wraparound_type = ATH10K_HW_CC_WRAP_SHIFTED_ALL,
+		.otp_exe_param = 0,
+		.channel_counters_freq_hz = 88000,
+		.max_probe_resp_desc_thres = 0,
+		.cal_data_len = 2116,
+		.fw = {
+			.dir = QCA988X_HW_2_0_FW_DIR,
+			.board = QCA988X_HW_2_0_BOARD_DATA_FILE,
+			.board_size = QCA988X_BOARD_DATA_SZ,
+			.board_ext_size = QCA988X_BOARD_EXT_DATA_SZ,
+		},
+		.hw_ops = &qca988x_ops,
+		.decap_align_bytes = 4,
+		.spectral_bin_discard = 0,
+		.vht160_mcs_rx_highest = 0,
+		.vht160_mcs_tx_highest = 0,
+		.n_cipher_suites = 8,
+	},
 	{
 		.id = QCA988X_HW_2_0_VERSION,
 		.dev_id = QCA988X_2_0_DEVICE_ID,
diff --git a/drivers/net/wireless/ath/ath10k/hw.h b/drivers/net/wireless/ath/ath10k/hw.h
index 05f26e5858ad..5ae3b56acc19 100644
--- a/drivers/net/wireless/ath/ath10k/hw.h
+++ b/drivers/net/wireless/ath/ath10k/hw.h
@@ -22,6 +22,7 @@
 
 #define ATH10K_FW_DIR			"ath10k"
 
+#define QCA988X_2_0_DEVICE_ID_UBNT   (0x11ac)
 #define QCA988X_2_0_DEVICE_ID   (0x003c)
 #define QCA6164_2_1_DEVICE_ID   (0x0041)
 #define QCA6174_2_1_DEVICE_ID   (0x003e)
diff --git a/drivers/net/wireless/ath/ath10k/pci.c b/drivers/net/wireless/ath/ath10k/pci.c
index ffea348b2190..ccac6740795d 100644
--- a/drivers/net/wireless/ath/ath10k/pci.c
+++ b/drivers/net/wireless/ath/ath10k/pci.c
@@ -52,6 +52,7 @@ MODULE_PARM_DESC(reset_mode, "0: auto, 1: warm only (default: 0)");
 #define ATH10K_PCI_NUM_WARM_RESET_ATTEMPTS 3
 
 static const struct pci_device_id ath10k_pci_id_table[] = {
+	{ PCI_VDEVICE(UBNT, QCA988X_2_0_DEVICE_ID_UBNT) }, /* PCI-E QCA988X V2 (Ubiquiti branded) */
 	{ PCI_VDEVICE(ATHEROS, QCA988X_2_0_DEVICE_ID) }, /* PCI-E QCA988X V2 */
 	{ PCI_VDEVICE(ATHEROS, QCA6164_2_1_DEVICE_ID) }, /* PCI-E QCA6164 V2.1 */
 	{ PCI_VDEVICE(ATHEROS, QCA6174_2_1_DEVICE_ID) }, /* PCI-E QCA6174 V2.1 */
@@ -68,6 +69,7 @@ static const struct ath10k_pci_supp_chip ath10k_pci_supp_chips[] = {
 	 * hacks. ath10k doesn't have them and these devices crash horribly
 	 * because of that.
 	 */
+	{ QCA988X_2_0_DEVICE_ID_UBNT, QCA988X_HW_2_0_CHIP_ID_REV },
 	{ QCA988X_2_0_DEVICE_ID, QCA988X_HW_2_0_CHIP_ID_REV },
 
 	{ QCA6164_2_1_DEVICE_ID, QCA6174_HW_2_1_CHIP_ID_REV },
@@ -1977,6 +1979,7 @@ static int ath10k_pci_get_num_banks(struct ath10k *ar)
 	struct ath10k_pci *ar_pci = ath10k_pci_priv(ar);
 
 	switch (ar_pci->pdev->device) {
+	case QCA988X_2_0_DEVICE_ID_UBNT:
 	case QCA988X_2_0_DEVICE_ID:
 	case QCA99X0_2_0_DEVICE_ID:
 	case QCA9888_2_0_DEVICE_ID:
@@ -3208,6 +3211,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	u32 (*targ_cpu_to_ce_addr)(struct ath10k *ar, u32 addr);
 
 	switch (pci_dev->device) {
+	case QCA988X_2_0_DEVICE_ID_UBNT:
 	case QCA988X_2_0_DEVICE_ID:
 		hw_rev = ATH10K_HW_QCA988X;
 		pci_ps = false;
-- 
2.16.0


_______________________________________________
ath10k mailing list
ath10k@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/ath10k

  parent reply	other threads:[~2018-01-24 19:43 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-01-24 19:42 [PATCH 0/2] ath10: Add support for Ubiquiti-branded QCA988X Tobias Schramm
2018-01-24 19:42 ` [PATCH 1/2] pci: Add vendor id of Ubiquiti Networks Tobias Schramm
2018-01-24 19:42 ` Tobias Schramm [this message]
2018-01-25  5:25 ` [PATCH 0/2] ath10: Add support for Ubiquiti-branded QCA988X Kalle Valo
2018-01-25  9:34   ` Sebastian Gottschall
2018-01-25 10:34     ` Tobias Schramm
2018-01-25 17:59       ` Sebastian Gottschall

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180124194218.11408-3-tobleminer@gmail.com \
    --to=tobleminer@gmail.com \
    --cc=ath10k@lists.infradead.org \
    --cc=kvalo@qca.qualcomm.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.