From: Bartosz Golaszewski <brgl@bgdev.pl>
To: Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>, Sekhar Nori <nsekhar@ti.com>,
Kevin Hilman <khilman@kernel.org>,
Russell King <linux@armlinux.org.uk>,
David Lechner <david@lechnology.com>
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-arm-kernel@lists.infradead.org,
Bartosz Golaszewski <bgolaszewski@baylibre.com>
Subject: [PATCH 5/7] ARM: dts: da850: add power-domains properties to device nodes
Date: Wed, 7 Feb 2018 14:45:51 +0100 [thread overview]
Message-ID: <20180207134553.13510-6-brgl@bgdev.pl> (raw)
In-Reply-To: <20180207134553.13510-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Make all devices managed by PSCs use the genpd driver.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ac2eef4e6b7c..a2a1a3b7de3c 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -83,6 +83,7 @@
ti,intc-size = <101>;
reg = <0xfffee000 0x2000>;
clocks = <&psc0 6>;
+ power-domains = <&pwc0>;
};
};
clocks: clocks {
@@ -125,6 +126,7 @@
interrupt-parent = <&intc>;
interrupts = <28>;
clocks = <&psc0 15>;
+ power-domains = <&pwc0>;
status = "disabled";
};
soc@1c00000 {
@@ -400,12 +402,14 @@
clocks = <&psc1 1>, <&usb_refclkin>,
<&pll0_auxclk>;
clock-names = "fck", "usb_refclkin", "auxclk";
+ power-domains = <&pwc1>;
};
ehrpwm_tbclk: ehrpwm_tbclk {
compatible = "ti,da830-tbclksync";
#clock-cells = <0>;
clocks = <&psc1 17>;
clock-names = "fck";
+ power-domains = <&pwc1>;
};
div4p5_clk: div4.5 {
compatible = "ti,da830-div4p5ena";
@@ -439,6 +443,7 @@
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
clocks = <&psc0 0>;
+ power-domains = <&pwc0>;
};
edma0_tptc0: tptc@8000 {
compatible = "ti,edma3-tptc";
@@ -446,6 +451,7 @@
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
clocks = <&psc0 1>;
+ power-domains = <&pwc0>;
};
edma0_tptc1: tptc@8400 {
compatible = "ti,edma3-tptc";
@@ -453,6 +459,7 @@
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
clocks = <&psc0 2>;
+ power-domains = <&pwc0>;
};
edma1: edma@230000 {
compatible = "ti,edma3-tpcc";
@@ -465,6 +472,7 @@
ti,tptcs = <&edma1_tptc0 7>;
clocks = <&psc1 0>;
+ power-domains = <&pwc1>;
};
edma1_tptc0: tptc@238000 {
compatible = "ti,edma3-tptc";
@@ -472,6 +480,7 @@
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
clocks = <&psc1 21>;
+ power-domains = <&pwc1>;
};
serial0: serial@42000 {
compatible = "ti,da830-uart", "ns16550a";
@@ -480,6 +489,7 @@
reg-shift = <2>;
interrupts = <25>;
clocks = <&psc0 9>;
+ power-domains = <&pwc0>;
status = "disabled";
};
serial1: serial@10c000 {
@@ -489,6 +499,7 @@
reg-shift = <2>;
interrupts = <53>;
clocks = <&psc1 12>;
+ power-domains = <&pwc1>;
status = "disabled";
};
serial2: serial@10d000 {
@@ -498,6 +509,7 @@
reg-shift = <2>;
interrupts = <61>;
clocks = <&psc1 13>;
+ power-domains = <&pwc1>;
status = "disabled";
};
rtc0: rtc@23000 {
@@ -523,6 +535,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&psc1 11>;
+ power-domains = <&pwc1>;
status = "disabled";
};
clocksource: timer@20000 {
@@ -545,6 +558,7 @@
dmas = <&edma0 16 0>, <&edma0 17 0>;
dma-names = "rx", "tx";
clocks = <&psc0 5>;
+ power-domains = <&pwc0>;
status = "disabled";
};
vpif: video@217000 {
@@ -552,6 +566,7 @@
reg = <0x217000 0x1000>;
interrupts = <92>;
clocks = <&psc1 9>;
+ power-domains = <&pwc1>;
status = "disabled";
/* VPIF capture port */
@@ -575,6 +590,7 @@
dmas = <&edma1 28 0>, <&edma1 29 0>;
dma-names = "rx", "tx";
clocks = <&psc1 18>;
+ power-domains = <&pwc1>;
status = "disabled";
};
ehrpwm0: pwm@300000 {
@@ -585,6 +601,7 @@
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
clock-names = "fck", "tbclk";
status = "disabled";
+ power-domains = <&pwc1>;
};
ehrpwm1: pwm@302000 {
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
@@ -592,6 +609,7 @@
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+ power-domains = <&pwc1>;
clock-names = "fck", "tbclk";
status = "disabled";
};
@@ -601,6 +619,7 @@
#pwm-cells = <3>;
reg = <0x306000 0x80>;
clocks = <&psc1 20>;
+ power-domains = <&pwc1>;
clock-names = "fck";
status = "disabled";
};
@@ -610,6 +629,7 @@
#pwm-cells = <3>;
reg = <0x307000 0x80>;
clocks = <&psc1 20>;
+ power-domains = <&pwc1>;
clock-names = "fck";
status = "disabled";
};
@@ -619,6 +639,7 @@
#pwm-cells = <3>;
reg = <0x308000 0x80>;
clocks = <&psc1 20>;
+ power-domains = <&pwc1>;
clock-names = "fck";
status = "disabled";
};
@@ -633,6 +654,7 @@
dmas = <&edma0 14 0>, <&edma0 15 0>;
dma-names = "rx", "tx";
clocks = <&psc0 4>;
+ power-domains = <&pwc0>;
status = "disabled";
};
spi1: spi@30e000 {
@@ -646,6 +668,7 @@
dmas = <&edma0 18 0>, <&edma0 19 0>;
dma-names = "rx", "tx";
clocks = <&psc1 10>;
+ power-domains = <&pwc1>;
status = "disabled";
};
usb0: usb@200000 {
@@ -658,6 +681,7 @@
phys = <&usb_phy 0>;
phy-names = "usb-phy";
clocks = <&psc1 1>;
+ power-domains = <&pwc1>;
status = "disabled";
#address-cells = <1>;
@@ -682,6 +706,7 @@
#dma-cells = <2>;
#dma-channels = <4>;
clocks = <&psc1 1>;
+ power-domains = <&pwc1>;
status = "okay";
};
};
@@ -690,6 +715,7 @@
reg = <0x218000 0x2000>, <0x22c018 0x4>;
interrupts = <67>;
clocks = <&psc1 8>, <&sata_refclk>;
+ power-domains = <&pwc1>;
clock-names = "fck", "refclk";
status = "disabled";
};
@@ -713,6 +739,7 @@
reg = <0x224000 0x1000>;
clocks = <&psc1 5>;
clock-names = "fck";
+ power-domains = <&pwc1>;
status = "disabled";
};
eth0: ethernet@220000 {
@@ -729,6 +756,7 @@
36
>;
clocks = <&psc1 5>;
+ power-domains = <&pwc1>;
status = "disabled";
};
usb1: usb@225000 {
@@ -738,6 +766,7 @@
phys = <&usb_phy 1>;
phy-names = "usb-phy";
clocks = <&psc1 2>;
+ power-domains = <&pwc1>;
status = "disabled";
};
gpio: gpio@226000 {
@@ -756,6 +785,7 @@
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&psc1 3>;
+ power-domains = <&pwc1>;
clock-names = "gpio";
};
psc1: clock-controller@227000 {
@@ -788,6 +818,7 @@
<&edma0 0 1>;
dma-names = "tx", "rx";
clocks = <&psc1 7>;
+ power-domains = <&pwc1>;
};
lcdc: display@213000 {
@@ -797,6 +828,7 @@
max-pixelclock = <37500>;
clocks = <&psc1 16>;
clock-names = "fck";
+ power-domains = <&pwc1>;
status = "disabled";
};
};
@@ -809,6 +841,7 @@
ranges = <0 0 0x60000000 0x08000000
1 0 0x68000000 0x00008000>;
clocks = <&psc0 3>;
+ power-domains = <&pwc0>;
status = "disabled";
};
memctrl: memory-controller@b0000000 {
--
2.16.1
WARNING: multiple messages have this Message-ID (diff)
From: brgl@bgdev.pl (Bartosz Golaszewski)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 5/7] ARM: dts: da850: add power-domains properties to device nodes
Date: Wed, 7 Feb 2018 14:45:51 +0100 [thread overview]
Message-ID: <20180207134553.13510-6-brgl@bgdev.pl> (raw)
In-Reply-To: <20180207134553.13510-1-brgl@bgdev.pl>
From: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Make all devices managed by PSCs use the genpd driver.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
---
arch/arm/boot/dts/da850.dtsi | 33 +++++++++++++++++++++++++++++++++
1 file changed, 33 insertions(+)
diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi
index ac2eef4e6b7c..a2a1a3b7de3c 100644
--- a/arch/arm/boot/dts/da850.dtsi
+++ b/arch/arm/boot/dts/da850.dtsi
@@ -83,6 +83,7 @@
ti,intc-size = <101>;
reg = <0xfffee000 0x2000>;
clocks = <&psc0 6>;
+ power-domains = <&pwc0>;
};
};
clocks: clocks {
@@ -125,6 +126,7 @@
interrupt-parent = <&intc>;
interrupts = <28>;
clocks = <&psc0 15>;
+ power-domains = <&pwc0>;
status = "disabled";
};
soc at 1c00000 {
@@ -400,12 +402,14 @@
clocks = <&psc1 1>, <&usb_refclkin>,
<&pll0_auxclk>;
clock-names = "fck", "usb_refclkin", "auxclk";
+ power-domains = <&pwc1>;
};
ehrpwm_tbclk: ehrpwm_tbclk {
compatible = "ti,da830-tbclksync";
#clock-cells = <0>;
clocks = <&psc1 17>;
clock-names = "fck";
+ power-domains = <&pwc1>;
};
div4p5_clk: div4.5 {
compatible = "ti,da830-div4p5ena";
@@ -439,6 +443,7 @@
ti,tptcs = <&edma0_tptc0 7>, <&edma0_tptc1 0>;
clocks = <&psc0 0>;
+ power-domains = <&pwc0>;
};
edma0_tptc0: tptc at 8000 {
compatible = "ti,edma3-tptc";
@@ -446,6 +451,7 @@
interrupts = <13>;
interrupt-names = "edm3_tcerrint";
clocks = <&psc0 1>;
+ power-domains = <&pwc0>;
};
edma0_tptc1: tptc at 8400 {
compatible = "ti,edma3-tptc";
@@ -453,6 +459,7 @@
interrupts = <32>;
interrupt-names = "edm3_tcerrint";
clocks = <&psc0 2>;
+ power-domains = <&pwc0>;
};
edma1: edma at 230000 {
compatible = "ti,edma3-tpcc";
@@ -465,6 +472,7 @@
ti,tptcs = <&edma1_tptc0 7>;
clocks = <&psc1 0>;
+ power-domains = <&pwc1>;
};
edma1_tptc0: tptc at 238000 {
compatible = "ti,edma3-tptc";
@@ -472,6 +480,7 @@
interrupts = <95>;
interrupt-names = "edm3_tcerrint";
clocks = <&psc1 21>;
+ power-domains = <&pwc1>;
};
serial0: serial at 42000 {
compatible = "ti,da830-uart", "ns16550a";
@@ -480,6 +489,7 @@
reg-shift = <2>;
interrupts = <25>;
clocks = <&psc0 9>;
+ power-domains = <&pwc0>;
status = "disabled";
};
serial1: serial at 10c000 {
@@ -489,6 +499,7 @@
reg-shift = <2>;
interrupts = <53>;
clocks = <&psc1 12>;
+ power-domains = <&pwc1>;
status = "disabled";
};
serial2: serial at 10d000 {
@@ -498,6 +509,7 @@
reg-shift = <2>;
interrupts = <61>;
clocks = <&psc1 13>;
+ power-domains = <&pwc1>;
status = "disabled";
};
rtc0: rtc at 23000 {
@@ -523,6 +535,7 @@
#address-cells = <1>;
#size-cells = <0>;
clocks = <&psc1 11>;
+ power-domains = <&pwc1>;
status = "disabled";
};
clocksource: timer at 20000 {
@@ -545,6 +558,7 @@
dmas = <&edma0 16 0>, <&edma0 17 0>;
dma-names = "rx", "tx";
clocks = <&psc0 5>;
+ power-domains = <&pwc0>;
status = "disabled";
};
vpif: video at 217000 {
@@ -552,6 +566,7 @@
reg = <0x217000 0x1000>;
interrupts = <92>;
clocks = <&psc1 9>;
+ power-domains = <&pwc1>;
status = "disabled";
/* VPIF capture port */
@@ -575,6 +590,7 @@
dmas = <&edma1 28 0>, <&edma1 29 0>;
dma-names = "rx", "tx";
clocks = <&psc1 18>;
+ power-domains = <&pwc1>;
status = "disabled";
};
ehrpwm0: pwm at 300000 {
@@ -585,6 +601,7 @@
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
clock-names = "fck", "tbclk";
status = "disabled";
+ power-domains = <&pwc1>;
};
ehrpwm1: pwm at 302000 {
compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm",
@@ -592,6 +609,7 @@
#pwm-cells = <3>;
reg = <0x302000 0x2000>;
clocks = <&psc1 17>, <&ehrpwm_tbclk>;
+ power-domains = <&pwc1>;
clock-names = "fck", "tbclk";
status = "disabled";
};
@@ -601,6 +619,7 @@
#pwm-cells = <3>;
reg = <0x306000 0x80>;
clocks = <&psc1 20>;
+ power-domains = <&pwc1>;
clock-names = "fck";
status = "disabled";
};
@@ -610,6 +629,7 @@
#pwm-cells = <3>;
reg = <0x307000 0x80>;
clocks = <&psc1 20>;
+ power-domains = <&pwc1>;
clock-names = "fck";
status = "disabled";
};
@@ -619,6 +639,7 @@
#pwm-cells = <3>;
reg = <0x308000 0x80>;
clocks = <&psc1 20>;
+ power-domains = <&pwc1>;
clock-names = "fck";
status = "disabled";
};
@@ -633,6 +654,7 @@
dmas = <&edma0 14 0>, <&edma0 15 0>;
dma-names = "rx", "tx";
clocks = <&psc0 4>;
+ power-domains = <&pwc0>;
status = "disabled";
};
spi1: spi at 30e000 {
@@ -646,6 +668,7 @@
dmas = <&edma0 18 0>, <&edma0 19 0>;
dma-names = "rx", "tx";
clocks = <&psc1 10>;
+ power-domains = <&pwc1>;
status = "disabled";
};
usb0: usb at 200000 {
@@ -658,6 +681,7 @@
phys = <&usb_phy 0>;
phy-names = "usb-phy";
clocks = <&psc1 1>;
+ power-domains = <&pwc1>;
status = "disabled";
#address-cells = <1>;
@@ -682,6 +706,7 @@
#dma-cells = <2>;
#dma-channels = <4>;
clocks = <&psc1 1>;
+ power-domains = <&pwc1>;
status = "okay";
};
};
@@ -690,6 +715,7 @@
reg = <0x218000 0x2000>, <0x22c018 0x4>;
interrupts = <67>;
clocks = <&psc1 8>, <&sata_refclk>;
+ power-domains = <&pwc1>;
clock-names = "fck", "refclk";
status = "disabled";
};
@@ -713,6 +739,7 @@
reg = <0x224000 0x1000>;
clocks = <&psc1 5>;
clock-names = "fck";
+ power-domains = <&pwc1>;
status = "disabled";
};
eth0: ethernet at 220000 {
@@ -729,6 +756,7 @@
36
>;
clocks = <&psc1 5>;
+ power-domains = <&pwc1>;
status = "disabled";
};
usb1: usb at 225000 {
@@ -738,6 +766,7 @@
phys = <&usb_phy 1>;
phy-names = "usb-phy";
clocks = <&psc1 2>;
+ power-domains = <&pwc1>;
status = "disabled";
};
gpio: gpio at 226000 {
@@ -756,6 +785,7 @@
interrupt-controller;
#interrupt-cells = <2>;
clocks = <&psc1 3>;
+ power-domains = <&pwc1>;
clock-names = "gpio";
};
psc1: clock-controller at 227000 {
@@ -788,6 +818,7 @@
<&edma0 0 1>;
dma-names = "tx", "rx";
clocks = <&psc1 7>;
+ power-domains = <&pwc1>;
};
lcdc: display at 213000 {
@@ -797,6 +828,7 @@
max-pixelclock = <37500>;
clocks = <&psc1 16>;
clock-names = "fck";
+ power-domains = <&pwc1>;
status = "disabled";
};
};
@@ -809,6 +841,7 @@
ranges = <0 0 0x60000000 0x08000000
1 0 0x68000000 0x00008000>;
clocks = <&psc0 3>;
+ power-domains = <&pwc0>;
status = "disabled";
};
memctrl: memory-controller at b0000000 {
--
2.16.1
next prev parent reply other threads:[~2018-02-07 13:46 UTC|newest]
Thread overview: 58+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-07 13:45 [PATCH 0/7] ARM: davinci: add genpd support Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` [PATCH 1/7] dt-bindings: soc: new driver for DaVinci genpd Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 21:47 ` David Lechner
2018-02-07 21:47 ` David Lechner
2018-02-08 8:56 ` Bartosz Golaszewski
2018-02-08 8:56 ` Bartosz Golaszewski
2018-02-08 8:56 ` Bartosz Golaszewski
2018-02-09 0:40 ` Kevin Hilman
2018-02-09 0:40 ` Kevin Hilman
2018-02-09 0:40 ` Kevin Hilman
2018-02-07 13:45 ` [PATCH 2/7] soc: davinci: new genpd driver Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 21:49 ` David Lechner
2018-02-07 21:49 ` David Lechner
2018-02-07 21:49 ` David Lechner
2018-02-08 9:30 ` Sekhar Nori
2018-02-08 9:30 ` Sekhar Nori
2018-02-08 9:30 ` Sekhar Nori
2018-02-08 9:54 ` Bartosz Golaszewski
2018-02-08 9:54 ` Bartosz Golaszewski
2018-02-08 12:56 ` Sekhar Nori
2018-02-08 12:56 ` Sekhar Nori
2018-02-08 12:56 ` Sekhar Nori
2018-02-08 13:27 ` Bartosz Golaszewski
2018-02-08 13:27 ` Bartosz Golaszewski
2018-02-08 13:27 ` Bartosz Golaszewski
2018-02-08 14:43 ` Sekhar Nori
2018-02-08 14:43 ` Sekhar Nori
2018-02-08 14:43 ` Sekhar Nori
2018-02-07 13:45 ` [PATCH 3/7] ARM: davinci: don't setup pm_clk if we're using genpd Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` [PATCH 4/7] ARM: dts: da850: add power controller nodes Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 21:58 ` David Lechner
2018-02-07 21:58 ` David Lechner
2018-02-07 21:58 ` David Lechner
2018-02-07 13:45 ` Bartosz Golaszewski [this message]
2018-02-07 13:45 ` [PATCH 5/7] ARM: dts: da850: add power-domains properties to device nodes Bartosz Golaszewski
2018-02-07 22:21 ` David Lechner
2018-02-07 22:21 ` David Lechner
2018-02-07 13:45 ` [PATCH 6/7] ARM: davinci: select generic power domains for DaVinci in DT mode Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 13:45 ` [PATCH 7/7] ARM: davinci_all_defconfig: select the DaVinci genpd driver " Bartosz Golaszewski
2018-02-07 13:45 ` Bartosz Golaszewski
2018-02-07 22:43 ` [PATCH 0/7] ARM: davinci: add genpd support David Lechner
2018-02-07 22:43 ` David Lechner
2018-02-09 12:42 ` Sekhar Nori
2018-02-09 12:42 ` Sekhar Nori
2018-02-09 12:42 ` Sekhar Nori
2018-02-18 3:41 ` David Lechner
2018-02-18 3:41 ` David Lechner
2018-02-18 3:41 ` David Lechner
2018-02-19 10:49 ` Bartosz Golaszewski
2018-02-19 10:49 ` Bartosz Golaszewski
2018-02-19 10:49 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180207134553.13510-6-brgl@bgdev.pl \
--to=brgl@bgdev.pl \
--cc=bgolaszewski@baylibre.com \
--cc=david@lechnology.com \
--cc=devicetree@vger.kernel.org \
--cc=khilman@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=nsekhar@ti.com \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.