All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kevin Wolf <kwolf@redhat.com>
To: qemu-block@nongnu.org
Cc: kwolf@redhat.com, qemu-devel@nongnu.org
Subject: [Qemu-devel] [PULL 45/55] qcow2: Prepare expand_zero_clusters_in_l1() for adding L2 slice support
Date: Tue, 13 Feb 2018 18:05:19 +0100	[thread overview]
Message-ID: <20180213170529.10858-46-kwolf@redhat.com> (raw)
In-Reply-To: <20180213170529.10858-1-kwolf@redhat.com>

From: Alberto Garcia <berto@igalia.com>

Adding support for L2 slices to expand_zero_clusters_in_l1() needs
(among other things) an extra loop that iterates over all slices of
each L2 table.

Putting all changes in one patch would make it hard to read because
all semantic changes would be mixed with pure indentation changes.

To make things easier this patch simply creates a new block and
changes the indentation of all lines of code inside it. Thus, all
modifications in this patch are cosmetic. There are no semantic
changes and no variables are renamed yet. The next patch will take
care of that.

Signed-off-by: Alberto Garcia <berto@igalia.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: c2ae9f31ed5b6e591477ad4654448badd1c89d73.1517840877.git.berto@igalia.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
---
 block/qcow2-cluster.c | 187 ++++++++++++++++++++++++++------------------------
 1 file changed, 96 insertions(+), 91 deletions(-)

diff --git a/block/qcow2-cluster.c b/block/qcow2-cluster.c
index 1041dcb6dd..ccb2944eda 100644
--- a/block/qcow2-cluster.c
+++ b/block/qcow2-cluster.c
@@ -1904,118 +1904,123 @@ static int expand_zero_clusters_in_l1(BlockDriverState *bs, uint64_t *l1_table,
             goto fail;
         }
 
-        if (is_active_l1) {
-            /* get active L2 tables from cache */
-            ret = qcow2_cache_get(bs, s->l2_table_cache, l2_offset,
-                    (void **)&l2_table);
-        } else {
-            /* load inactive L2 tables from disk */
-            ret = bdrv_read(bs->file, l2_offset / BDRV_SECTOR_SIZE,
-                            (void *)l2_table, s->cluster_sectors);
-        }
-        if (ret < 0) {
-            goto fail;
-        }
-
-        for (j = 0; j < s->l2_size; j++) {
-            uint64_t l2_entry = be64_to_cpu(l2_table[j]);
-            int64_t offset = l2_entry & L2E_OFFSET_MASK;
-            QCow2ClusterType cluster_type = qcow2_get_cluster_type(l2_entry);
-
-            if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN &&
-                cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) {
-                continue;
+        {
+            if (is_active_l1) {
+                /* get active L2 tables from cache */
+                ret = qcow2_cache_get(bs, s->l2_table_cache, l2_offset,
+                                      (void **)&l2_table);
+            } else {
+                /* load inactive L2 tables from disk */
+                ret = bdrv_read(bs->file, l2_offset / BDRV_SECTOR_SIZE,
+                                (void *)l2_table, s->cluster_sectors);
+            }
+            if (ret < 0) {
+                goto fail;
             }
 
-            if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
-                if (!bs->backing) {
-                    /* not backed; therefore we can simply deallocate the
-                     * cluster */
-                    l2_table[j] = 0;
-                    l2_dirty = true;
+            for (j = 0; j < s->l2_size; j++) {
+                uint64_t l2_entry = be64_to_cpu(l2_table[j]);
+                int64_t offset = l2_entry & L2E_OFFSET_MASK;
+                QCow2ClusterType cluster_type =
+                    qcow2_get_cluster_type(l2_entry);
+
+                if (cluster_type != QCOW2_CLUSTER_ZERO_PLAIN &&
+                    cluster_type != QCOW2_CLUSTER_ZERO_ALLOC) {
                     continue;
                 }
 
-                offset = qcow2_alloc_clusters(bs, s->cluster_size);
-                if (offset < 0) {
-                    ret = offset;
-                    goto fail;
-                }
+                if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
+                    if (!bs->backing) {
+                        /* not backed; therefore we can simply deallocate the
+                         * cluster */
+                        l2_table[j] = 0;
+                        l2_dirty = true;
+                        continue;
+                    }
+
+                    offset = qcow2_alloc_clusters(bs, s->cluster_size);
+                    if (offset < 0) {
+                        ret = offset;
+                        goto fail;
+                    }
 
-                if (l2_refcount > 1) {
-                    /* For shared L2 tables, set the refcount accordingly (it is
-                     * already 1 and needs to be l2_refcount) */
-                    ret = qcow2_update_cluster_refcount(bs,
-                            offset >> s->cluster_bits,
+                    if (l2_refcount > 1) {
+                        /* For shared L2 tables, set the refcount accordingly
+                         * (it is already 1 and needs to be l2_refcount) */
+                        ret = qcow2_update_cluster_refcount(
+                            bs, offset >> s->cluster_bits,
                             refcount_diff(1, l2_refcount), false,
                             QCOW2_DISCARD_OTHER);
-                    if (ret < 0) {
-                        qcow2_free_clusters(bs, offset, s->cluster_size,
-                                            QCOW2_DISCARD_OTHER);
-                        goto fail;
+                        if (ret < 0) {
+                            qcow2_free_clusters(bs, offset, s->cluster_size,
+                                                QCOW2_DISCARD_OTHER);
+                            goto fail;
+                        }
                     }
                 }
-            }
 
-            if (offset_into_cluster(s, offset)) {
-                qcow2_signal_corruption(bs, true, -1, -1,
-                                        "Cluster allocation offset "
-                                        "%#" PRIx64 " unaligned (L2 offset: %#"
-                                        PRIx64 ", L2 index: %#x)", offset,
-                                        l2_offset, j);
-                if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
-                    qcow2_free_clusters(bs, offset, s->cluster_size,
-                                        QCOW2_DISCARD_ALWAYS);
+                if (offset_into_cluster(s, offset)) {
+                    qcow2_signal_corruption(
+                        bs, true, -1, -1,
+                        "Cluster allocation offset "
+                        "%#" PRIx64 " unaligned (L2 offset: %#"
+                        PRIx64 ", L2 index: %#x)", offset,
+                        l2_offset, j);
+                    if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
+                        qcow2_free_clusters(bs, offset, s->cluster_size,
+                                            QCOW2_DISCARD_ALWAYS);
+                    }
+                    ret = -EIO;
+                    goto fail;
                 }
-                ret = -EIO;
-                goto fail;
-            }
 
-            ret = qcow2_pre_write_overlap_check(bs, 0, offset, s->cluster_size);
-            if (ret < 0) {
-                if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
-                    qcow2_free_clusters(bs, offset, s->cluster_size,
-                                        QCOW2_DISCARD_ALWAYS);
+                ret = qcow2_pre_write_overlap_check(bs, 0, offset,
+                                                    s->cluster_size);
+                if (ret < 0) {
+                    if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
+                        qcow2_free_clusters(bs, offset, s->cluster_size,
+                                            QCOW2_DISCARD_ALWAYS);
+                    }
+                    goto fail;
                 }
-                goto fail;
-            }
 
-            ret = bdrv_pwrite_zeroes(bs->file, offset, s->cluster_size, 0);
-            if (ret < 0) {
-                if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
-                    qcow2_free_clusters(bs, offset, s->cluster_size,
-                                        QCOW2_DISCARD_ALWAYS);
+                ret = bdrv_pwrite_zeroes(bs->file, offset, s->cluster_size, 0);
+                if (ret < 0) {
+                    if (cluster_type == QCOW2_CLUSTER_ZERO_PLAIN) {
+                        qcow2_free_clusters(bs, offset, s->cluster_size,
+                                            QCOW2_DISCARD_ALWAYS);
+                    }
+                    goto fail;
                 }
-                goto fail;
-            }
 
-            if (l2_refcount == 1) {
-                l2_table[j] = cpu_to_be64(offset | QCOW_OFLAG_COPIED);
-            } else {
-                l2_table[j] = cpu_to_be64(offset);
+                if (l2_refcount == 1) {
+                    l2_table[j] = cpu_to_be64(offset | QCOW_OFLAG_COPIED);
+                } else {
+                    l2_table[j] = cpu_to_be64(offset);
+                }
+                l2_dirty = true;
             }
-            l2_dirty = true;
-        }
 
-        if (is_active_l1) {
-            if (l2_dirty) {
-                qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
-                qcow2_cache_depends_on_flush(s->l2_table_cache);
-            }
-            qcow2_cache_put(s->l2_table_cache, (void **) &l2_table);
-        } else {
-            if (l2_dirty) {
-                ret = qcow2_pre_write_overlap_check(bs,
-                        QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2, l2_offset,
-                        s->cluster_size);
-                if (ret < 0) {
-                    goto fail;
+            if (is_active_l1) {
+                if (l2_dirty) {
+                    qcow2_cache_entry_mark_dirty(s->l2_table_cache, l2_table);
+                    qcow2_cache_depends_on_flush(s->l2_table_cache);
                 }
+                qcow2_cache_put(s->l2_table_cache, (void **) &l2_table);
+            } else {
+                if (l2_dirty) {
+                    ret = qcow2_pre_write_overlap_check(
+                        bs, QCOW2_OL_INACTIVE_L2 | QCOW2_OL_ACTIVE_L2,
+                        l2_offset, s->cluster_size);
+                    if (ret < 0) {
+                        goto fail;
+                    }
 
-                ret = bdrv_write(bs->file, l2_offset / BDRV_SECTOR_SIZE,
-                                 (void *)l2_table, s->cluster_sectors);
-                if (ret < 0) {
-                    goto fail;
+                    ret = bdrv_write(bs->file, l2_offset / BDRV_SECTOR_SIZE,
+                                     (void *)l2_table, s->cluster_sectors);
+                    if (ret < 0) {
+                        goto fail;
+                    }
                 }
             }
         }
-- 
2.13.6

  parent reply	other threads:[~2018-02-13 17:06 UTC|newest]

Thread overview: 58+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-02-13 17:04 [Qemu-devel] [PULL 00/55] Block layer patches Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 01/55] iotests: Fix CID for VMDK afl image Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 02/55] qemu-img.texi: Clean up parameter list Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 03/55] qemu-img: Document --force-share / -U Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 04/55] docs: Document share-rw property more thoroughly Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 05/55] qcow2: Use g_try_realloc() in qcow2_expand_zero_clusters() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 06/55] block: early check for blockers on drive-mirror Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 07/55] iotests: Use virtio-blk in 155 Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 08/55] qemu-io: fix EOF Ctrl-D handling in qemu-io readline code Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 09/55] gluster: Move glfs_close() to create's clean-up Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 10/55] gluster: Pull truncation from qemu_gluster_create Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 11/55] gluster: Query current size in do_truncate() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 12/55] gluster: Add preallocated truncation Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 13/55] sheepdog: Make sd_prealloc() take a BDS Kevin Wolf
2018-05-08 15:33   ` Peter Maydell
2018-02-13 17:04 ` [Qemu-devel] [PULL 14/55] sheepdog: Pass old and new size to sd_prealloc() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 15/55] sheepdog: Allow fully preallocated truncation Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 16/55] block: maintain persistent disabled bitmaps Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 17/55] qcow2: Fix documentation of get_cluster_table() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 18/55] qcow2: Add table size field to Qcow2Cache Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 19/55] qcow2: Remove BDS parameter from qcow2_cache_get_table_addr() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 20/55] qcow2: Remove BDS parameter from qcow2_cache_get_table_idx() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 21/55] qcow2: Remove BDS parameter from qcow2_cache_table_release() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 22/55] qcow2: Remove BDS parameter from qcow2_cache_entry_mark_dirty() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 23/55] qcow2: Remove BDS parameter from qcow2_cache_put() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 24/55] qcow2: Remove BDS parameter from qcow2_cache_destroy() Kevin Wolf
2018-02-13 17:04 ` [Qemu-devel] [PULL 25/55] qcow2: Remove BDS parameter from qcow2_cache_clean_unused() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 26/55] qcow2: Remove BDS parameter from qcow2_cache_discard() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 27/55] qcow2: Remove BDS parameter from qcow2_cache_is_table_offset() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 28/55] qcow2: Add offset_to_l1_index() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 29/55] qcow2: Add l2_slice_size field to BDRVQcow2State Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 30/55] qcow2: Add offset_to_l2_slice_index() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 31/55] qcow2: Update l2_load() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 32/55] qcow2: Prepare l2_allocate() for adding L2 slice support Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 33/55] qcow2: Update l2_allocate() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 34/55] qcow2: Refactor get_cluster_table() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 35/55] qcow2: Update get_cluster_table() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 36/55] qcow2: Update qcow2_get_cluster_offset() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 37/55] qcow2: Update qcow2_alloc_cluster_link_l2() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 38/55] qcow2: Update handle_copied() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 39/55] qcow2: Update handle_alloc() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 40/55] qcow2: Update discard_single_l2() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 41/55] qcow2: Update zero_single_l2() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 42/55] qcow2: Prepare qcow2_update_snapshot_refcount() for adding L2 slice support Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 43/55] qcow2: Update qcow2_update_snapshot_refcount() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 44/55] qcow2: Read refcount before L2 table in expand_zero_clusters_in_l1() Kevin Wolf
2018-02-13 17:05 ` Kevin Wolf [this message]
2018-02-13 17:05 ` [Qemu-devel] [PULL 46/55] qcow2: Update expand_zero_clusters_in_l1() to support L2 slices Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 47/55] qcow2: Update qcow2_truncate() " Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 48/55] qcow2: Rename l2_table in qcow2_alloc_compressed_cluster_offset() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 49/55] qcow2: Rename l2_table in count_contiguous_clusters() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 50/55] qcow2: Rename l2_table in count_contiguous_clusters_unallocated() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 51/55] qcow2: Rename l2_table in count_cow_clusters() Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 52/55] qcow2: Allow configuring the L2 slice size Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 53/55] iotests: Test valid values of l2-cache-entry-size Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 54/55] iotests: Test downgrading an image using a small L2 slice size Kevin Wolf
2018-02-13 17:05 ` [Qemu-devel] [PULL 55/55] iotests: Add l2-cache-entry-size to iotest 137 Kevin Wolf
2018-02-15 10:13 ` [Qemu-devel] [PULL 00/55] Block layer patches Peter Maydell

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180213170529.10858-46-kwolf@redhat.com \
    --to=kwolf@redhat.com \
    --cc=qemu-block@nongnu.org \
    --cc=qemu-devel@nongnu.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.