From: "Dr. David Alan Gilbert (git)" <dgilbert@redhat.com>
To: qemu-devel@nongnu.org, quintela@redhat.com, peterx@redhat.com,
groug@kaod.org, ross.lagerwall@citrix.com
Subject: [Qemu-devel] [PULL 03/10] tests/migration: Add source to PC boot block
Date: Wed, 14 Feb 2018 15:39:31 +0000 [thread overview]
Message-ID: <20180214153938.5410-4-dgilbert@redhat.com> (raw)
In-Reply-To: <20180214153938.5410-1-dgilbert@redhat.com>
From: "Dr. David Alan Gilbert" <dgilbert@redhat.com>
The boot block used in the migration test is currently only
shipped as a hex (with the source in the git commit message of ea0c6d62),
change this to actually include the source.
A script is added to rebuild the header but the expectation is that
the generated hex is shipped as well as the .s, so that
there's no requirement to have just the right assembler etc.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <20180213100606.5379-1-dgilbert@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Removed blank line at end of script
---
tests/migration-test.c | 52 ++----------------
tests/migration/rebuild-x86-bootblock.sh | 33 ++++++++++++
tests/migration/x86-a-b-bootblock.h | 51 ++++++++++++++++++
tests/migration/x86-a-b-bootblock.s | 92 ++++++++++++++++++++++++++++++++
4 files changed, 180 insertions(+), 48 deletions(-)
create mode 100755 tests/migration/rebuild-x86-bootblock.sh
create mode 100644 tests/migration/x86-a-b-bootblock.h
create mode 100644 tests/migration/x86-a-b-bootblock.s
diff --git a/tests/migration-test.c b/tests/migration-test.c
index d0abad40f5..97fdb1988e 100644
--- a/tests/migration-test.c
+++ b/tests/migration-test.c
@@ -1,7 +1,7 @@
/*
* QTest testcase for migration
*
- * Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+ * Copyright (c) 2016-2018 Red Hat, Inc. and/or its affiliates
* based on the vhost-user-test.c that is:
* Copyright (c) 2014 Virtual Open Systems Sarl.
*
@@ -78,59 +78,15 @@ static bool ufd_version_check(void)
static const char *tmpfs;
/* A simple PC boot sector that modifies memory (1-100MB) quickly
- * outputing a 'B' every so often if it's still running.
+ * outputting a 'B' every so often if it's still running.
*/
-unsigned char bootsect[] = {
- 0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
- 0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
- 0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
- 0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
- 0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
- 0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
- 0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
- 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
- 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
-};
+#include "tests/migration/x86-a-b-bootblock.h"
static void init_bootfile_x86(const char *bootpath)
{
FILE *bootfile = fopen(bootpath, "wb");
- g_assert_cmpint(fwrite(bootsect, 512, 1, bootfile), ==, 1);
+ g_assert_cmpint(fwrite(x86_bootsect, 512, 1, bootfile), ==, 1);
fclose(bootfile);
}
diff --git a/tests/migration/rebuild-x86-bootblock.sh b/tests/migration/rebuild-x86-bootblock.sh
new file mode 100755
index 0000000000..86cec5d284
--- /dev/null
+++ b/tests/migration/rebuild-x86-bootblock.sh
@@ -0,0 +1,33 @@
+#!/bin/sh
+# Copyright (c) 2016-2018 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: dgilbert@redhat.com
+
+ASMFILE=$PWD/tests/migration/x86-a-b-bootblock.s
+HEADER=$PWD/tests/migration/x86-a-b-bootblock.h
+
+if [ ! -e "$ASMFILE" ]
+then
+ echo "Couldn't find $ASMFILE" >&2
+ exit 1
+fi
+
+ASM_WORK_DIR=$(mktemp -d --tmpdir X86BB.XXXXXX)
+cd "$ASM_WORK_DIR" &&
+as --32 -march=i486 "$ASMFILE" -o x86.o &&
+objcopy -O binary x86.o x86.boot &&
+dd if=x86.boot of=x86.bootsect bs=256 count=2 skip=124 &&
+xxd -i x86.bootsect |
+sed -e 's/.*int.*//' > x86.hex &&
+cat - x86.hex <<HERE > "$HEADER"
+/* This file is automatically generated from
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+HERE
+
+rm x86.hex x86.bootsect x86.boot x86.o
+cd .. && rmdir "$ASM_WORK_DIR"
diff --git a/tests/migration/x86-a-b-bootblock.h b/tests/migration/x86-a-b-bootblock.h
new file mode 100644
index 0000000000..78a151fe2a
--- /dev/null
+++ b/tests/migration/x86-a-b-bootblock.h
@@ -0,0 +1,51 @@
+/* This file is automatically generated from
+ * tests/migration/x86-a-b-bootblock.s, edit that and then run
+ * tests/migration/rebuild-x86-bootblock.sh to update,
+ * and then remember to send both in your patch submission.
+ */
+unsigned char x86_bootsect[] = {
+ 0xfa, 0x0f, 0x01, 0x16, 0x74, 0x7c, 0x66, 0xb8, 0x01, 0x00, 0x00, 0x00,
+ 0x0f, 0x22, 0xc0, 0x66, 0xea, 0x20, 0x7c, 0x00, 0x00, 0x08, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0xe4, 0x92, 0x0c, 0x02,
+ 0xe6, 0x92, 0xb8, 0x10, 0x00, 0x00, 0x00, 0x8e, 0xd8, 0x66, 0xb8, 0x41,
+ 0x00, 0x66, 0xba, 0xf8, 0x03, 0xee, 0xb3, 0x00, 0xb8, 0x00, 0x00, 0x10,
+ 0x00, 0xfe, 0x00, 0x05, 0x00, 0x10, 0x00, 0x00, 0x3d, 0x00, 0x00, 0x40,
+ 0x06, 0x7c, 0xf2, 0xfe, 0xc3, 0x75, 0xe9, 0x66, 0xb8, 0x42, 0x00, 0x66,
+ 0xba, 0xf8, 0x03, 0xee, 0xeb, 0xde, 0x66, 0x90, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0xff, 0xff, 0x00, 0x00, 0x00, 0x9a, 0xcf, 0x00,
+ 0xff, 0xff, 0x00, 0x00, 0x00, 0x92, 0xcf, 0x00, 0x27, 0x00, 0x5c, 0x7c,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x55, 0xaa
+};
+
diff --git a/tests/migration/x86-a-b-bootblock.s b/tests/migration/x86-a-b-bootblock.s
new file mode 100644
index 0000000000..b1642641a7
--- /dev/null
+++ b/tests/migration/x86-a-b-bootblock.s
@@ -0,0 +1,92 @@
+# x86 bootblock used in migration test
+# repeatedly increments the first byte of each page in a 100MB
+# range.
+# Outputs an initial 'A' on serial followed by repeated 'B's
+#
+# run tests/migration/rebuild-x86-bootblock.sh
+# to regenerate the hex, and remember to include both the .h and .s
+# in any patches.
+#
+# Copyright (c) 2016 Red Hat, Inc. and/or its affiliates
+# This work is licensed under the terms of the GNU GPL, version 2 or later.
+# See the COPYING file in the top-level directory.
+#
+# Author: dgilbert@redhat.com
+
+
+.code16
+.org 0x7c00
+ .file "fill.s"
+ .text
+ .globl start
+ .type start, @function
+start: # at 0x7c00 ?
+ cli
+ lgdt gdtdesc
+ mov $1,%eax
+ mov %eax,%cr0 # Protected mode enable
+ data32 ljmp $8,$0x7c20
+
+.org 0x7c20
+.code32
+ # A20 enable - not sure I actually need this
+ inb $0x92,%al
+ or $2,%al
+ outb %al, $0x92
+
+ # set up DS for the whole of RAM (needed on KVM)
+ mov $16,%eax
+ mov %eax,%ds
+
+ mov $65,%ax
+ mov $0x3f8,%dx
+ outb %al,%dx
+
+ # bl keeps a counter so we limit the output speed
+ mov $0, %bl
+mainloop:
+ # Start from 1MB
+ mov $(1024*1024),%eax
+innerloop:
+ incb (%eax)
+ add $4096,%eax
+ cmp $(100*1024*1024),%eax
+ jl innerloop
+
+ inc %bl
+ jnz mainloop
+
+ mov $66,%ax
+ mov $0x3f8,%dx
+ outb %al,%dx
+
+ jmp mainloop
+
+ # GDT magic from old (GPLv2) Grub startup.S
+ .p2align 2 /* force 4-byte alignment */
+gdt:
+ .word 0, 0
+ .byte 0, 0, 0, 0
+
+ /* -- code segment --
+ * base = 0x00000000, limit = 0xFFFFF (4 KiB Granularity), present
+ * type = 32bit code execute/read, DPL = 0
+ */
+ .word 0xFFFF, 0
+ .byte 0, 0x9A, 0xCF, 0
+
+ /* -- data segment --
+ * base = 0x00000000, limit 0xFFFFF (4 KiB Granularity), present
+ * type = 32 bit data read/write, DPL = 0
+ */
+ .word 0xFFFF, 0
+ .byte 0, 0x92, 0xCF, 0
+
+gdtdesc:
+ .word 0x27 /* limit */
+ .long gdt /* addr */
+
+/* I'm a bootable disk */
+.org 0x7dfe
+ .byte 0x55
+ .byte 0xAA
--
2.14.3
next prev parent reply other threads:[~2018-02-14 15:40 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-14 15:39 [Qemu-devel] [PULL 00/10] migration queue Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 01/10] migration/xen: Check return value of qemu_fclose Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 02/10] migration: improve documentation of postcopy-ram Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` Dr. David Alan Gilbert (git) [this message]
2018-02-14 15:39 ` [Qemu-devel] [PULL 04/10] migration: Fix early failure cleanup Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 05/10] tests/migration: Add test for migration to bad destination Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 06/10] migration: better error handling with QEMUFile Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 07/10] migration: reuse mis->userfault_quit_fd Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 08/10] migration: provide postcopy_fault_thread_notify() Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 09/10] migration: allow send_rq to fail Dr. David Alan Gilbert (git)
2018-02-14 15:39 ` [Qemu-devel] [PULL 10/10] migration: pass MigrationState to migrate_init() Dr. David Alan Gilbert (git)
2018-02-15 15:45 ` [Qemu-devel] [PULL 00/10] migration queue Peter Maydell
2018-02-15 20:19 ` Dr. David Alan Gilbert
2018-02-16 6:14 ` Thomas Huth
2018-02-16 14:25 ` Peter Maydell
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180214153938.5410-4-dgilbert@redhat.com \
--to=dgilbert@redhat.com \
--cc=groug@kaod.org \
--cc=peterx@redhat.com \
--cc=qemu-devel@nongnu.org \
--cc=quintela@redhat.com \
--cc=ross.lagerwall@citrix.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.