From: Alexandre Belloni <alexandre.belloni@bootlin.com> To: Daniel Lezcano <daniel.lezcano@linaro.org> Cc: Thomas Gleixner <tglx@linutronix.de>, Nicolas Ferre <nicolas.ferre@microchip.com>, Boris Brezillon <boris.brezillon@bootlin.com>, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, Alexandre Belloni <alexandre.belloni@bootlin.com> Subject: [PATCH v3 3/6] clocksource/drivers: atmel-pit: make option silent Date: Fri, 23 Feb 2018 18:15:55 +0100 [thread overview] Message-ID: <20180223171558.7037-4-alexandre.belloni@bootlin.com> (raw) In-Reply-To: <20180223171558.7037-1-alexandre.belloni@bootlin.com> To conform with the other option, make the ATMEL_PIT option silent so it can be selected from the platform Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- drivers/clocksource/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index d540852c9175..87f326b849cd 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -381,8 +381,11 @@ config ARMV7M_SYSTICK This options enables support for the ARMv7M system timer unit config ATMEL_PIT + bool "Microchip ARM Periodic Interval Timer (PIT)" if COMPILE_TEST select TIMER_OF if OF - def_bool SOC_AT91SAM9 || SOC_SAMA5 + help + This enables build of clocksource and clockevent driver for + the integrated PIT in Microchip ARM SoCs. config ATMEL_ST bool "Atmel ST timer support" if COMPILE_TEST -- 2.16.1
WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@bootlin.com (Alexandre Belloni) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 3/6] clocksource/drivers: atmel-pit: make option silent Date: Fri, 23 Feb 2018 18:15:55 +0100 [thread overview] Message-ID: <20180223171558.7037-4-alexandre.belloni@bootlin.com> (raw) In-Reply-To: <20180223171558.7037-1-alexandre.belloni@bootlin.com> To conform with the other option, make the ATMEL_PIT option silent so it can be selected from the platform Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com> --- drivers/clocksource/Kconfig | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig index d540852c9175..87f326b849cd 100644 --- a/drivers/clocksource/Kconfig +++ b/drivers/clocksource/Kconfig @@ -381,8 +381,11 @@ config ARMV7M_SYSTICK This options enables support for the ARMv7M system timer unit config ATMEL_PIT + bool "Microchip ARM Periodic Interval Timer (PIT)" if COMPILE_TEST select TIMER_OF if OF - def_bool SOC_AT91SAM9 || SOC_SAMA5 + help + This enables build of clocksource and clockevent driver for + the integrated PIT in Microchip ARM SoCs. config ATMEL_ST bool "Atmel ST timer support" if COMPILE_TEST -- 2.16.1
next prev parent reply other threads:[~2018-02-23 17:17 UTC|newest] Thread overview: 46+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-02-23 17:15 [PATCH v3 0/6] clocksource: rework Atmel TCB timer driver Alexandre Belloni 2018-02-23 17:15 ` Alexandre Belloni 2018-02-23 17:15 ` [PATCH v3 1/6] ARM: at91: add TCB registers definitions Alexandre Belloni 2018-02-23 17:15 ` Alexandre Belloni 2018-02-23 17:15 ` [PATCH v3 2/6] clocksource/drivers: Add a new driver for the Atmel ARM TC blocks Alexandre Belloni 2018-02-23 17:15 ` Alexandre Belloni 2018-02-23 17:15 ` Alexandre Belloni [this message] 2018-02-23 17:15 ` [PATCH v3 3/6] clocksource/drivers: atmel-pit: make option silent Alexandre Belloni 2018-02-23 17:15 ` [PATCH v3 4/6] ARM: at91: Implement clocksource selection Alexandre Belloni 2018-02-23 17:15 ` Alexandre Belloni 2018-02-23 17:15 ` [PATCH v3 5/6] ARM: configs: at91: use new TCB timer driver Alexandre Belloni 2018-02-23 17:15 ` Alexandre Belloni 2018-02-23 17:15 ` [PATCH v3 6/6] ARM: configs: at91: unselect PIT Alexandre Belloni 2018-02-23 17:15 ` Alexandre Belloni 2018-03-22 15:33 ` [PATCH v3 0/6] clocksource: rework Atmel TCB timer driver Alexandre Belloni 2018-03-22 15:33 ` Alexandre Belloni 2018-03-27 10:41 ` Alexander Dahl 2018-03-27 10:41 ` Alexander Dahl 2018-03-27 11:30 ` Daniel Lezcano 2018-03-27 11:30 ` Daniel Lezcano 2018-03-28 10:29 ` Alexander Dahl 2018-03-28 10:29 ` Alexander Dahl 2018-03-28 13:03 ` Daniel Lezcano 2018-03-28 13:03 ` Daniel Lezcano 2018-03-28 14:16 ` Alexandre Belloni 2018-03-28 14:16 ` Alexandre Belloni 2018-03-28 14:36 ` Daniel Lezcano 2018-03-28 14:36 ` Daniel Lezcano 2018-03-28 15:31 ` Alexandre Belloni 2018-03-28 15:31 ` Alexandre Belloni 2018-03-28 15:50 ` Alexandre Belloni 2018-03-28 15:50 ` Alexandre Belloni 2018-03-29 8:01 ` Alexander Dahl 2018-03-29 8:01 ` Alexander Dahl 2018-03-29 10:45 ` Alexandre Belloni 2018-03-29 10:45 ` Alexandre Belloni 2018-03-29 11:31 ` Alexander Dahl 2018-03-29 11:31 ` Alexander Dahl 2018-03-29 11:42 ` Alexandre Belloni 2018-03-29 11:42 ` Alexandre Belloni 2018-03-29 12:07 ` Daniel Lezcano 2018-03-29 12:07 ` Daniel Lezcano 2018-03-29 13:02 ` Alexandre Belloni 2018-03-29 13:02 ` Alexandre Belloni 2018-03-29 15:11 ` Alexander Dahl 2018-03-29 15:11 ` Alexander Dahl
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180223171558.7037-4-alexandre.belloni@bootlin.com \ --to=alexandre.belloni@bootlin.com \ --cc=boris.brezillon@bootlin.com \ --cc=daniel.lezcano@linaro.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=nicolas.ferre@microchip.com \ --cc=tglx@linutronix.de \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.