From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: andrew@lunn.ch, vivien.didelot@savoirfairelinux.com,
Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
bcm-kernel-feedback-list@broadcom.com (maintainer:BROADCOM IPROC
ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Subject: [PATCH] ARM: dts: NSP: Switch to port 8 for CPU port
Date: Tue, 27 Feb 2018 12:45:19 -0800 [thread overview]
Message-ID: <20180227204520.24122-1-f.fainelli@gmail.com> (raw)
Now that we have added support for pre-pended Broadcom tags with commit
11606039604c ("net: dsa: b53: Support prepended Broadcom tags") we can
switch all the Northstar Plus reference boards to use port 8 for the CPU
port. This allows us to prepare room for supporting the Flow Accelerator
2 NAPT offload, and frees up port 5 to be made fully configurable for
the modes that it supports: internal, SGMII, RGMII etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm958622hr.dts | 6 +++---
arch/arm/boot/dts/bcm958623hr.dts | 6 +++---
arch/arm/boot/dts/bcm958625hr.dts | 6 +++---
arch/arm/boot/dts/bcm958625k.dts | 6 +++---
arch/arm/boot/dts/bcm988312hr.dts | 6 +++---
5 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index fd8b8c689ffe..ecd05e26c262 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -204,10 +204,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b8bde13de90a..f5e85b301497 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -208,10 +208,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 6a44b8021702..094db4ba8eb3 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -210,10 +210,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2cf2392483b2..3ea5f739e90b 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -245,10 +245,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index bce251a68591..ea9a0806b446 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -216,10 +216,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: linux-arm-kernel@lists.infradead.org
Cc: andrew@lunn.ch, vivien.didelot@savoirfairelinux.com,
Florian Fainelli <f.fainelli@gmail.com>,
Rob Herring <robh+dt@kernel.org>,
Mark Rutland <mark.rutland@arm.com>,
Russell King <linux@armlinux.org.uk>, Ray Jui <rjui@broadcom.com>,
Scott Branden <sbranden@broadcom.com>,
Jon Mason <jonmason@broadcom.com>,
"maintainer:BROADCOM IPROC ARM ARCHITECTURE"
<bcm-kernel-feedback-list@broadcom.com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@vger.kernel.org>,
open list <linux-kernel@vger.kernel.org>
Subject: [PATCH] ARM: dts: NSP: Switch to port 8 for CPU port
Date: Tue, 27 Feb 2018 12:45:19 -0800 [thread overview]
Message-ID: <20180227204520.24122-1-f.fainelli@gmail.com> (raw)
Now that we have added support for pre-pended Broadcom tags with commit
11606039604c ("net: dsa: b53: Support prepended Broadcom tags") we can
switch all the Northstar Plus reference boards to use port 8 for the CPU
port. This allows us to prepare room for supporting the Flow Accelerator
2 NAPT offload, and frees up port 5 to be made fully configurable for
the modes that it supports: internal, SGMII, RGMII etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm958622hr.dts | 6 +++---
arch/arm/boot/dts/bcm958623hr.dts | 6 +++---
arch/arm/boot/dts/bcm958625hr.dts | 6 +++---
arch/arm/boot/dts/bcm958625k.dts | 6 +++---
arch/arm/boot/dts/bcm988312hr.dts | 6 +++---
5 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index fd8b8c689ffe..ecd05e26c262 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -204,10 +204,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b8bde13de90a..f5e85b301497 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -208,10 +208,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 6a44b8021702..094db4ba8eb3 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -210,10 +210,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2cf2392483b2..3ea5f739e90b 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -245,10 +245,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index bce251a68591..ea9a0806b446 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -216,10 +216,10 @@
reg = <4>;
};
- port@5 {
- ethernet = <&amac0>;
+ port@8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
--
2.14.1
WARNING: multiple messages have this Message-ID (diff)
From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: NSP: Switch to port 8 for CPU port
Date: Tue, 27 Feb 2018 12:45:19 -0800 [thread overview]
Message-ID: <20180227204520.24122-1-f.fainelli@gmail.com> (raw)
Now that we have added support for pre-pended Broadcom tags with commit
11606039604c ("net: dsa: b53: Support prepended Broadcom tags") we can
switch all the Northstar Plus reference boards to use port 8 for the CPU
port. This allows us to prepare room for supporting the Flow Accelerator
2 NAPT offload, and frees up port 5 to be made fully configurable for
the modes that it supports: internal, SGMII, RGMII etc.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
---
arch/arm/boot/dts/bcm958622hr.dts | 6 +++---
arch/arm/boot/dts/bcm958623hr.dts | 6 +++---
arch/arm/boot/dts/bcm958625hr.dts | 6 +++---
arch/arm/boot/dts/bcm958625k.dts | 6 +++---
arch/arm/boot/dts/bcm988312hr.dts | 6 +++---
5 files changed, 15 insertions(+), 15 deletions(-)
diff --git a/arch/arm/boot/dts/bcm958622hr.dts b/arch/arm/boot/dts/bcm958622hr.dts
index fd8b8c689ffe..ecd05e26c262 100644
--- a/arch/arm/boot/dts/bcm958622hr.dts
+++ b/arch/arm/boot/dts/bcm958622hr.dts
@@ -204,10 +204,10 @@
reg = <4>;
};
- port at 5 {
- ethernet = <&amac0>;
+ port at 8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958623hr.dts b/arch/arm/boot/dts/bcm958623hr.dts
index b8bde13de90a..f5e85b301497 100644
--- a/arch/arm/boot/dts/bcm958623hr.dts
+++ b/arch/arm/boot/dts/bcm958623hr.dts
@@ -208,10 +208,10 @@
reg = <4>;
};
- port at 5 {
- ethernet = <&amac0>;
+ port at 8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958625hr.dts b/arch/arm/boot/dts/bcm958625hr.dts
index 6a44b8021702..094db4ba8eb3 100644
--- a/arch/arm/boot/dts/bcm958625hr.dts
+++ b/arch/arm/boot/dts/bcm958625hr.dts
@@ -210,10 +210,10 @@
reg = <4>;
};
- port at 5 {
- ethernet = <&amac0>;
+ port at 8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm958625k.dts b/arch/arm/boot/dts/bcm958625k.dts
index 2cf2392483b2..3ea5f739e90b 100644
--- a/arch/arm/boot/dts/bcm958625k.dts
+++ b/arch/arm/boot/dts/bcm958625k.dts
@@ -245,10 +245,10 @@
reg = <4>;
};
- port at 5 {
- ethernet = <&amac0>;
+ port at 8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
diff --git a/arch/arm/boot/dts/bcm988312hr.dts b/arch/arm/boot/dts/bcm988312hr.dts
index bce251a68591..ea9a0806b446 100644
--- a/arch/arm/boot/dts/bcm988312hr.dts
+++ b/arch/arm/boot/dts/bcm988312hr.dts
@@ -216,10 +216,10 @@
reg = <4>;
};
- port at 5 {
- ethernet = <&amac0>;
+ port at 8 {
+ ethernet = <&amac2>;
label = "cpu";
- reg = <5>;
+ reg = <8>;
fixed-link {
speed = <1000>;
full-duplex;
--
2.14.1
next reply other threads:[~2018-02-27 20:45 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-02-27 20:45 Florian Fainelli [this message]
2018-02-27 20:45 ` [PATCH] ARM: dts: NSP: Switch to port 8 for CPU port Florian Fainelli
2018-02-27 20:45 ` Florian Fainelli
2018-03-12 22:51 ` Florian Fainelli
2018-03-12 22:51 ` Florian Fainelli
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180227204520.24122-1-f.fainelli@gmail.com \
--to=f.fainelli@gmail.com \
--cc=andrew@lunn.ch \
--cc=bcm-kernel-feedback-list@broadcom.com \
--cc=devicetree@vger.kernel.org \
--cc=jonmason@broadcom.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@armlinux.org.uk \
--cc=mark.rutland@arm.com \
--cc=rjui@broadcom.com \
--cc=robh+dt@kernel.org \
--cc=sbranden@broadcom.com \
--cc=vivien.didelot@savoirfairelinux.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.