All of lore.kernel.org
 help / color / mirror / Atom feed
From: "José Roberto de Souza" <jose.souza@intel.com>
To: intel-gfx@lists.freedesktop.org
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>,
	Rodrigo Vivi <rodrigo.vivi@intel.com>
Subject: [PATCH v2 4/5] drm/i915/psr: Do not override PSR2 sink support
Date: Fri, 16 Mar 2018 16:05:00 -0700	[thread overview]
Message-ID: <20180316230501.974-4-jose.souza@intel.com> (raw)
In-Reply-To: <20180316230501.974-1-jose.souza@intel.com>

Sink can support our PSR2 requirements but userspace can request
a resolution that PSR2 hardware do not support, in this case it
was overwritten the PSR2 sink support.
Adding another flag here, this way if requested resolution changed
to a value that PSR2 hardware can handle, PSR2 can be enabled.

Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
---
 drivers/gpu/drm/i915/i915_debugfs.c |  4 ++--
 drivers/gpu/drm/i915/i915_drv.h     |  3 ++-
 drivers/gpu/drm/i915/intel_psr.c    | 36 ++++++++++++++++++------------------
 3 files changed, 22 insertions(+), 21 deletions(-)

diff --git a/drivers/gpu/drm/i915/i915_debugfs.c b/drivers/gpu/drm/i915/i915_debugfs.c
index 5378863e3238..4366adcad56d 100644
--- a/drivers/gpu/drm/i915/i915_debugfs.c
+++ b/drivers/gpu/drm/i915/i915_debugfs.c
@@ -2571,7 +2571,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 		   yesno(work_busy(&dev_priv->psr.work.work)));
 
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			enabled = I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE;
 		else
 			enabled = I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE;
@@ -2619,7 +2619,7 @@ static int i915_edp_psr_status(struct seq_file *m, void *data)
 
 		seq_printf(m, "Performance_Counter: %u\n", psrperf);
 	}
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		u32 psr2 = I915_READ(EDP_PSR2_STATUS);
 
 		seq_printf(m, "EDP_PSR2_STATUS: %x [%s]\n",
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index d4bc8d18f56c..d4475196f78a 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -601,11 +601,12 @@ struct i915_psr {
 	bool active;
 	struct delayed_work work;
 	unsigned busy_frontbuffer_bits;
-	bool psr2_support;
+	bool sink_psr2_support;
 	bool link_standby;
 	bool colorimetry_support;
 	bool alpm;
 	bool has_hw_tracking;
+	bool psr2_enabled;
 
 	void (*enable_source)(struct intel_dp *,
 			      const struct intel_crtc_state *);
diff --git a/drivers/gpu/drm/i915/intel_psr.c b/drivers/gpu/drm/i915/intel_psr.c
index c5eeb13cbcfd..aa4e03f65386 100644
--- a/drivers/gpu/drm/i915/intel_psr.c
+++ b/drivers/gpu/drm/i915/intel_psr.c
@@ -161,15 +161,15 @@ void intel_psr_init_dpcd(struct intel_dp *intel_dp)
 		 */
 		y_coord_req = intel_dp_get_y_coord_required(intel_dp);
 
-		dev_priv->psr.psr2_support = frame_sync_cap && y_coord_req;
-		if (dev_priv->psr.psr2_support)
+		dev_priv->psr.sink_psr2_support = frame_sync_cap && y_coord_req;
+		if (dev_priv->psr.sink_psr2_support)
 			DRM_DEBUG_KMS("PSR2 supported on sink\n");
 		else
 			DRM_DEBUG_KMS("PSR2 not supported on sink"
 				      "(frame sync: %d Y-coord required: %d)\n",
 				      frame_sync_cap, y_coord_req);
 
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.sink_psr2_support) {
 			dev_priv->psr.colorimetry_support =
 				intel_dp_get_colorimetry_status(intel_dp);
 			dev_priv->psr.alpm =
@@ -210,7 +210,7 @@ static void hsw_psr_setup_vsc(struct intel_dp *intel_dp,
 	struct drm_i915_private *dev_priv = to_i915(intel_dig_port->base.base.dev);
 	struct edp_vsc_psr psr_vsc;
 
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		/* Prepare VSC Header for SU as per EDP 1.4 spec, Table 6.11 */
 		memset(&psr_vsc, 0, sizeof(psr_vsc));
 		psr_vsc.sdp_header.HB0 = 0;
@@ -282,12 +282,12 @@ static void hsw_psr_enable_sink(struct intel_dp *intel_dp)
 	aux_clock_divider = intel_dp->get_aux_clock_divider(intel_dp, 0);
 
 	/* Enable AUX frame sync at sink */
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
 				DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
 				DP_AUX_FRAME_SYNC_ENABLE);
 	/* Enable ALPM at sink for psr2 */
-	if (dev_priv->psr.psr2_support && dev_priv->psr.alpm)
+	if (dev_priv->psr.psr2_enabled && dev_priv->psr.alpm)
 		drm_dp_dpcd_writeb(&intel_dp->aux,
 				DP_RECEIVER_ALPM_CONFIG,
 				DP_ALPM_ENABLE);
@@ -455,7 +455,7 @@ static void hsw_psr_activate(struct intel_dp *intel_dp)
 	 */
 
 	/* psr1 and psr2 are mutually exclusive.*/
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		hsw_activate_psr2(intel_dp);
 	else
 		hsw_activate_psr1(intel_dp);
@@ -475,7 +475,7 @@ static bool intel_psr2_config_valid(struct intel_dp *intel_dp,
 	 * dynamically during PSR enable, and extracted from sink
 	 * caps during eDP detection.
 	 */
-	if (!dev_priv->psr.psr2_support)
+	if (!dev_priv->psr.sink_psr2_support)
 		return false;
 
 	if (INTEL_GEN(dev_priv) >= 10 || IS_GEMINILAKE(dev_priv)) {
@@ -574,7 +574,7 @@ static void intel_psr_activate(struct intel_dp *intel_dp)
 	struct drm_device *dev = intel_dig_port->base.base.dev;
 	struct drm_i915_private *dev_priv = to_i915(dev);
 
-	if (dev_priv->psr.psr2_support)
+	if (dev_priv->psr.psr2_enabled)
 		WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
 	else
 		WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
@@ -595,7 +595,7 @@ static void hsw_psr_enable_source(struct intel_dp *intel_dp,
 
 	psr_aux_io_power_get(intel_dp);
 
-	if (dev_priv->psr.psr2_support) {
+	if (dev_priv->psr.psr2_enabled) {
 		u32 chicken = PSR2_VSC_ENABLE_PROG_HEADER
 			      | PSR2_ADD_VERTICAL_LINE_COUNT;
 		I915_WRITE(CHICKEN_TRANS(cpu_transcoder), chicken);
@@ -648,7 +648,7 @@ void intel_psr_enable(struct intel_dp *intel_dp,
 		goto unlock;
 	}
 
-	dev_priv->psr.psr2_support = crtc_state->has_psr2;
+	dev_priv->psr.psr2_enabled = crtc_state->has_psr2;
 	dev_priv->psr.busy_frontbuffer_bits = 0;
 
 	dev_priv->psr.setup_vsc(intel_dp, crtc_state);
@@ -718,12 +718,12 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
 		i915_reg_t psr_status;
 		u32 psr_status_mask;
 
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			drm_dp_dpcd_writeb(&intel_dp->aux,
 					DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
 					0);
 
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			psr_status = EDP_PSR2_STATUS;
 			psr_status_mask = EDP_PSR2_STATUS_STATE_MASK;
 
@@ -747,7 +747,7 @@ static void hsw_psr_disable(struct intel_dp *intel_dp,
 
 		dev_priv->psr.active = false;
 	} else {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			WARN_ON(I915_READ(EDP_PSR2_CTL) & EDP_PSR2_ENABLE);
 		else
 			WARN_ON(I915_READ(EDP_PSR_CTL) & EDP_PSR_ENABLE);
@@ -807,7 +807,7 @@ static void intel_psr_work(struct work_struct *work)
 	 * and be ready for re-enable.
 	 */
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			if (intel_wait_for_register(dev_priv,
 						    EDP_PSR2_STATUS,
 						    EDP_PSR2_STATUS_STATE_MASK,
@@ -866,11 +866,11 @@ static void intel_psr_exit(struct drm_i915_private *dev_priv)
 		return;
 
 	if (HAS_DDI(dev_priv)) {
-		if (dev_priv->psr.psr2_support)
+		if (dev_priv->psr.psr2_enabled)
 			drm_dp_dpcd_writeb(&intel_dp->aux,
 					DP_SINK_DEVICE_AUX_FRAME_SYNC_CONF,
 					0);
-		if (dev_priv->psr.psr2_support) {
+		if (dev_priv->psr.psr2_enabled) {
 			val = I915_READ(EDP_PSR2_CTL);
 			WARN_ON(!(val & EDP_PSR2_ENABLE));
 			I915_WRITE(EDP_PSR2_CTL, val & ~EDP_PSR2_ENABLE);
@@ -1039,7 +1039,7 @@ void intel_psr_flush(struct drm_i915_private *dev_priv,
 
 	/* By definition flush = invalidate + flush */
 	if (frontbuffer_bits) {
-		if (dev_priv->psr.psr2_support ||
+		if (dev_priv->psr.psr2_enabled ||
 		    IS_VALLEYVIEW(dev_priv) || IS_CHERRYVIEW(dev_priv)) {
 			intel_psr_exit(dev_priv);
 		} else {
-- 
2.16.2

_______________________________________________
Intel-gfx mailing list
Intel-gfx@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/intel-gfx

  parent reply	other threads:[~2018-03-16 23:08 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-03-16 23:04 [PATCH v2 1/5] drm/i915/psr: Nuke aux_frame_sync José Roberto de Souza
2018-03-16 23:04 ` [PATCH v2 2/5] drm/i915/psr: Tie PSR2 support to Y coordinate requirement in intel_psr_init_dpcd() José Roberto de Souza
2018-03-16 23:25   ` Rodrigo Vivi
2018-03-17  0:25     ` Pandiyan, Dhinakaran
2018-03-17  0:17   ` Pandiyan, Dhinakaran
2018-03-16 23:04 ` [PATCH v2 3/5] drm/i915/psr/cnl: Enable Y-coordinate support in source José Roberto de Souza
2018-03-17  0:29   ` Pandiyan, Dhinakaran
2018-03-16 23:05 ` José Roberto de Souza [this message]
2018-03-16 23:26   ` [PATCH v2 4/5] drm/i915/psr: Do not override PSR2 sink support Rodrigo Vivi
2018-03-16 23:05 ` [PATCH v2 5/5] drm/i915/psr: Simply PSR computed state José Roberto de Souza
2018-03-16 23:30   ` Rodrigo Vivi
2018-03-17  0:38     ` Pandiyan, Dhinakaran
2018-03-17  1:31       ` Souza, Jose
2018-03-16 23:38 ` [PATCH v2 1/5] drm/i915/psr: Nuke aux_frame_sync Pandiyan, Dhinakaran
2018-03-16 23:50 ` ✗ Fi.CI.CHECKPATCH: warning for series starting with [v2,1/5] " Patchwork
2018-03-17  0:05 ` ✗ Fi.CI.BAT: failure " Patchwork

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180316230501.974-4-jose.souza@intel.com \
    --to=jose.souza@intel.com \
    --cc=dhinakaran.pandiyan@intel.com \
    --cc=intel-gfx@lists.freedesktop.org \
    --cc=rodrigo.vivi@intel.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.