From: Sebastian Reichel <sebastian.reichel@collabora.co.uk> To: Sebastian Reichel <sre@kernel.org>, Milo Kim <Milo.Kim@ti.com>, Lee Jones <lee.jones@linaro.org>, Daniel Thompson <daniel.thompson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Tony Lindgren <tony@atomide.com> Cc: Jingoo Han <jingoohan1@gmail.com>, Mark Rutland <mark.rutland@arm.com>, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org, linux-omap@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.co.uk> Subject: [PATCHv4 06/10] mfd: ti-lmu: add PWM support Date: Fri, 30 Mar 2018 19:24:10 +0200 [thread overview] Message-ID: <20180330172414.26575-7-sebastian.reichel@collabora.co.uk> (raw) In-Reply-To: <20180330172414.26575-1-sebastian.reichel@collabora.co.uk> This adds support to acquire the optional PWM channel, that can be used by some of the LMU variants. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> --- drivers/mfd/ti-lmu.c | 11 +++++++++++ include/linux/mfd/ti-lmu.h | 3 +++ 2 files changed, 14 insertions(+) diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index ce16c896879b..f43b8acc30e1 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -183,6 +183,17 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) return ret; } + lmu->pwm = devm_pwm_get(dev, "lmu-backlight"); + if (IS_ERR(lmu->pwm)) { + ret = PTR_ERR(lmu->pwm); + if (ret != -EINVAL) { + dev_err(dev, "Failed to get PWM: %d\n", ret); + return ret; + } + + lmu->pwm = NULL; + } + ret = ti_lmu_enable_hw(lmu, id->driver_data); if (ret) return ret; diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 1ef51ed36be5..246ab5145dff 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -17,6 +17,7 @@ #include <linux/notifier.h> #include <linux/regmap.h> #include <linux/gpio/consumer.h> +#include <linux/pwm.h> /* Notifier event */ #define LMU_EVENT_MONITOR_DONE 0x01 @@ -77,12 +78,14 @@ enum lm363x_regulator_id { * @dev: Parent device pointer * @regmap: Used for i2c communcation on accessing registers * @en_gpio: GPIO for HWEN pin [Optional] + * @pwm: PWM for module [Optional] * @notifier: Notifier for reporting hwmon event */ struct ti_lmu { struct device *dev; struct regmap *regmap; struct gpio_desc *en_gpio; + struct pwm_device *pwm; struct blocking_notifier_head notifier; }; #endif -- 2.16.2
WARNING: multiple messages have this Message-ID (diff)
From: Sebastian Reichel <sebastian.reichel@collabora.co.uk> To: Sebastian Reichel <sre@kernel.org>, Milo Kim <Milo.Kim@ti.com>, Lee Jones <lee.jones@linaro.org>, Daniel Thompson <daniel.thompson@linaro.org>, Rob Herring <robh+dt@kernel.org>, Tony Lindgren <tony@atomide.com> Cc: Jingoo Han <jingoohan1@gmail.com>, Mark Rutland <mark.rutland@arm.com>, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org, linux-omap@vger.kernel.org, Sebastian Reichel <sebastian.reichel@collabora.co.uk> Subject: [PATCHv4 06/10] mfd: ti-lmu: add PWM support Date: Fri, 30 Mar 2018 17:24:10 +0000 [thread overview] Message-ID: <20180330172414.26575-7-sebastian.reichel@collabora.co.uk> (raw) In-Reply-To: <20180330172414.26575-1-sebastian.reichel@collabora.co.uk> This adds support to acquire the optional PWM channel, that can be used by some of the LMU variants. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.co.uk> --- drivers/mfd/ti-lmu.c | 11 +++++++++++ include/linux/mfd/ti-lmu.h | 3 +++ 2 files changed, 14 insertions(+) diff --git a/drivers/mfd/ti-lmu.c b/drivers/mfd/ti-lmu.c index ce16c896879b..f43b8acc30e1 100644 --- a/drivers/mfd/ti-lmu.c +++ b/drivers/mfd/ti-lmu.c @@ -183,6 +183,17 @@ static int ti_lmu_probe(struct i2c_client *cl, const struct i2c_device_id *id) return ret; } + lmu->pwm = devm_pwm_get(dev, "lmu-backlight"); + if (IS_ERR(lmu->pwm)) { + ret = PTR_ERR(lmu->pwm); + if (ret != -EINVAL) { + dev_err(dev, "Failed to get PWM: %d\n", ret); + return ret; + } + + lmu->pwm = NULL; + } + ret = ti_lmu_enable_hw(lmu, id->driver_data); if (ret) return ret; diff --git a/include/linux/mfd/ti-lmu.h b/include/linux/mfd/ti-lmu.h index 1ef51ed36be5..246ab5145dff 100644 --- a/include/linux/mfd/ti-lmu.h +++ b/include/linux/mfd/ti-lmu.h @@ -17,6 +17,7 @@ #include <linux/notifier.h> #include <linux/regmap.h> #include <linux/gpio/consumer.h> +#include <linux/pwm.h> /* Notifier event */ #define LMU_EVENT_MONITOR_DONE 0x01 @@ -77,12 +78,14 @@ enum lm363x_regulator_id { * @dev: Parent device pointer * @regmap: Used for i2c communcation on accessing registers * @en_gpio: GPIO for HWEN pin [Optional] + * @pwm: PWM for module [Optional] * @notifier: Notifier for reporting hwmon event */ struct ti_lmu { struct device *dev; struct regmap *regmap; struct gpio_desc *en_gpio; + struct pwm_device *pwm; struct blocking_notifier_head notifier; }; #endif -- 2.16.2
next prev parent reply other threads:[~2018-03-30 17:24 UTC|newest] Thread overview: 62+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-03-30 17:24 [PATCHv4 00/10] backlight: Add TI LMU backlight driver Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-03-30 17:24 ` [PATCHv4 01/10] mfd: ti-lmu: constify mfd_cell tables Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-16 14:20 ` Lee Jones 2018-04-16 14:20 ` Lee Jones 2018-03-30 17:24 ` [PATCHv4 02/10] mfd: ti-lmu: switch to gpiod Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-16 14:32 ` Lee Jones 2018-04-16 14:32 ` Lee Jones 2018-03-30 17:24 ` [PATCHv4 03/10] mfd: ti-lmu: use managed resource for everything Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-16 14:38 ` Lee Jones 2018-04-16 14:38 ` Lee Jones 2018-03-30 17:24 ` [PATCHv4 04/10] mfd: ti-lmu: drop of_compatible for backlight driver Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-16 14:40 ` Lee Jones 2018-04-16 14:40 ` Lee Jones 2018-03-30 17:24 ` [PATCHv4 05/10] mfd: ti-lmu: use of_device_get_match_data() helper Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-16 14:41 ` Lee Jones 2018-04-16 14:41 ` Lee Jones 2018-03-30 17:24 ` Sebastian Reichel [this message] 2018-03-30 17:24 ` [PATCHv4 06/10] mfd: ti-lmu: add PWM support Sebastian Reichel 2018-04-03 10:48 ` Pavel Machek 2018-04-03 10:48 ` Pavel Machek 2018-04-04 19:04 ` Dan Murphy 2018-04-04 19:04 ` Dan Murphy 2018-04-04 19:04 ` Dan Murphy 2018-04-09 15:46 ` Sebastian Reichel 2018-04-09 15:46 ` Sebastian Reichel 2018-03-30 17:24 ` [PATCHv4 07/10] mfd: ti-lmu: register one backlight device per channel Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-16 14:42 ` Lee Jones 2018-04-16 14:42 ` Lee Jones 2018-03-30 17:24 ` [PATCHv4 08/10] backlight: add TI LMU backlight driver Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-03 10:49 ` Pavel Machek 2018-04-03 10:49 ` Pavel Machek 2018-04-09 15:54 ` Sebastian Reichel 2018-04-09 15:54 ` Sebastian Reichel 2018-04-10 6:38 ` Pavel Machek 2018-04-10 6:38 ` Pavel Machek 2018-04-04 14:57 ` Daniel Thompson 2018-04-04 14:57 ` Daniel Thompson 2018-04-09 16:14 ` Sebastian Reichel 2018-04-09 16:14 ` Sebastian Reichel 2018-04-04 18:30 ` Dan Murphy 2018-04-04 18:30 ` Dan Murphy 2018-04-04 18:30 ` Dan Murphy 2018-04-09 16:11 ` Sebastian Reichel 2018-04-09 16:11 ` Sebastian Reichel 2018-03-30 17:24 ` [PATCHv4 09/10] dt-bindings: mfd: ti-lmu: update for backlight Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-09 21:06 ` Rob Herring 2018-04-09 21:06 ` Rob Herring 2018-04-09 21:24 ` Sebastian Reichel 2018-04-09 21:24 ` Sebastian Reichel 2018-03-30 17:24 ` [PATCHv4 10/10] ARM: dts: omap4-droid4: update backlight led-controller Sebastian Reichel 2018-03-30 17:24 ` Sebastian Reichel 2018-04-03 10:49 ` Pavel Machek 2018-04-03 10:49 ` Pavel Machek
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180330172414.26575-7-sebastian.reichel@collabora.co.uk \ --to=sebastian.reichel@collabora.co.uk \ --cc=Milo.Kim@ti.com \ --cc=daniel.thompson@linaro.org \ --cc=devicetree@vger.kernel.org \ --cc=jingoohan1@gmail.com \ --cc=lee.jones@linaro.org \ --cc=linux-fbdev@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=robh+dt@kernel.org \ --cc=sre@kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.