All of lore.kernel.org
 help / color / mirror / Atom feed
From: Kishon Vijay Abraham I <kishon@ti.com>
To: "Benoît Cousson " <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>
Cc: Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, <linux-doc@vger.kernel.org>,
	<kishon@ti.com>, <linux-mmc@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>, Vishal Mahaveer <vishalm@ti.com>
Subject: [PATCH v3 12/15] ARM: dts: dra76-evm: Add wilink8 wlan support
Date: Wed, 25 Apr 2018 18:24:46 +0530	[thread overview]
Message-ID: <20180425125449.19755-13-kishon@ti.com> (raw)
In-Reply-To: <20180425125449.19755-1-kishon@ti.com>

From: Vishal Mahaveer <vishalm@ti.com>

Add support for WLAN using wilink8 module. On dra76-evm, MMC4 is
used for connecting to wilink8 module.

Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra76-evm.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 2deb96405d06..ad154c7b0632 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -42,6 +42,16 @@
 		regulator-boot-on;
 	};
 
+	vio_3v6: fixedregulator-vio_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: fixedregulator-vsys3v3 {
 		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
 		compatible = "regulator-fixed";
@@ -81,6 +91,16 @@
 		vin-supply = <&smps5_reg>;
 	};
 
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 0>;	/* gpio5_8 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt_fixed";
@@ -331,6 +351,17 @@
 	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
 };
 
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&vio_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25";
+	pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
+	pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+};
+
 /* No RTC on this device */
 &rtc {
 	status = "disabled";
-- 
2.17.0

WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: "Benoît Cousson " <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>
Cc: Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	linux-doc@vger.kernel.org, kishon@ti.com,
	linux-mmc@vger.kernel.org, devicetree@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-omap@vger.kernel.org,
	Vishal Mahaveer <vishalm@ti.com>
Subject: [PATCH v3 12/15] ARM: dts: dra76-evm: Add wilink8 wlan support
Date: Wed, 25 Apr 2018 18:24:46 +0530	[thread overview]
Message-ID: <20180425125449.19755-13-kishon@ti.com> (raw)
In-Reply-To: <20180425125449.19755-1-kishon@ti.com>

From: Vishal Mahaveer <vishalm@ti.com>

Add support for WLAN using wilink8 module. On dra76-evm, MMC4 is
used for connecting to wilink8 module.

Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra76-evm.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 2deb96405d06..ad154c7b0632 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -42,6 +42,16 @@
 		regulator-boot-on;
 	};
 
+	vio_3v6: fixedregulator-vio_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: fixedregulator-vsys3v3 {
 		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
 		compatible = "regulator-fixed";
@@ -81,6 +91,16 @@
 		vin-supply = <&smps5_reg>;
 	};
 
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 0>;	/* gpio5_8 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt_fixed";
@@ -331,6 +351,17 @@
 	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
 };
 
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&vio_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25";
+	pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
+	pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+};
+
 /* No RTC on this device */
 &rtc {
 	status = "disabled";
-- 
2.17.0

WARNING: multiple messages have this Message-ID (diff)
From: Kishon Vijay Abraham I <kishon@ti.com>
To: "Benoît Cousson " <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>
Cc: Jonathan Corbet <corbet@lwn.net>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>, <linux-doc@vger.kernel.org>,
	<kishon@ti.com>, <linux-mmc@vger.kernel.org>,
	<devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linux-omap@vger.kernel.org>, Vishal Mahaveer <vishalm@ti.com>
Subject: [PATCH v3 12/15] ARM: dts: dra76-evm: Add wilink8 wlan support
Date: Wed, 25 Apr 2018 18:24:46 +0530	[thread overview]
Message-ID: <20180425125449.19755-13-kishon@ti.com> (raw)
In-Reply-To: <20180425125449.19755-1-kishon@ti.com>

From: Vishal Mahaveer <vishalm@ti.com>

Add support for WLAN using wilink8 module. On dra76-evm, MMC4 is
used for connecting to wilink8 module.

Signed-off-by: Vishal Mahaveer <vishalm@ti.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
---
 arch/arm/boot/dts/dra76-evm.dts | 31 +++++++++++++++++++++++++++++++
 1 file changed, 31 insertions(+)

diff --git a/arch/arm/boot/dts/dra76-evm.dts b/arch/arm/boot/dts/dra76-evm.dts
index 2deb96405d06..ad154c7b0632 100644
--- a/arch/arm/boot/dts/dra76-evm.dts
+++ b/arch/arm/boot/dts/dra76-evm.dts
@@ -42,6 +42,16 @@
 		regulator-boot-on;
 	};
 
+	vio_3v6: fixedregulator-vio_3v6 {
+		compatible = "regulator-fixed";
+		regulator-name = "vio_3v6";
+		regulator-min-microvolt = <3600000>;
+		regulator-max-microvolt = <3600000>;
+		vin-supply = <&vsys_5v0>;
+		regulator-always-on;
+		regulator-boot-on;
+	};
+
 	vsys_3v3: fixedregulator-vsys3v3 {
 		/* Output of Cntlr A of TPS43351-Q1 on dra76-evm */
 		compatible = "regulator-fixed";
@@ -81,6 +91,16 @@
 		vin-supply = <&smps5_reg>;
 	};
 
+	vmmcwl_fixed: fixedregulator-mmcwl {
+		compatible = "regulator-fixed";
+		regulator-name = "vmmcwl_fixed";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		gpio = <&gpio5 8 0>;	/* gpio5_8 */
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
+
 	vtt_fixed: fixedregulator-vtt {
 		compatible = "regulator-fixed";
 		regulator-name = "vtt_fixed";
@@ -331,6 +351,17 @@
 	pinctrl-3 = <&mmc2_pins_hs200 &mmc2_iodelay_hs200_conf>;
 };
 
+&mmc4 {
+	status = "okay";
+	vmmc-supply = <&vio_3v6>;
+	vqmmc-supply = <&vmmcwl_fixed>;
+	pinctrl-names = "default", "hs", "sdr12", "sdr25";
+	pinctrl-0 = <&mmc4_pins_hs &mmc4_iodelay_default_conf>;
+	pinctrl-1 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-2 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+	pinctrl-3 = <&mmc4_pins_hs &mmc4_iodelay_manual1_conf>;
+};
+
 /* No RTC on this device */
 &rtc {
 	status = "disabled";
-- 
2.17.0

--
To unsubscribe from this list: send the line "unsubscribe linux-doc" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

  parent reply	other threads:[~2018-04-25 12:56 UTC|newest]

Thread overview: 61+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-04-25 12:54 [PATCH v3 00/15] dra7: mmc: Update mmc dt node to use sdhci-omap Kishon Vijay Abraham I
2018-04-25 12:54 ` Kishon Vijay Abraham I
2018-04-25 12:54 ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 01/15] ARM: dts: dra72-evm-common: Remove mmc specific pinmux Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 02/15] ARM: dts: dra71-evm: Add "vqmmc-supply" property for mmc2 Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 03/15] ARM: dts: dra72x-mmc-iodelay: Add a new pinctrl group for clk line without pullup Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 04/15] ARM: dts: dra74x-mmc-iodelay: " Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 13:35   ` Tony Lindgren
2018-04-25 13:35     ` Tony Lindgren
2018-04-27 11:19     ` Kishon Vijay Abraham I
2018-04-27 11:19       ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 05/15] ARM: dts: dra76x-mmc-iodelay: " Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 06/15] ARM: dts: am57xx-idk: Use pinctrl group from dra7xx-mmc-iodelay.dtsi to select pulldown Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 07/15] ARM: dts: dra71-evm: Use pinctrl group from dra72x-mmc-iodelay.dtsi " Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 08/15] ARM: dts: am574x-idk: Add pinmux configuration for MMC Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 09/15] ARM: dts: dra72-evm-common: Add wilink8 wlan support Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 14:49   ` Rob Herring
2018-04-25 14:49     ` Rob Herring
2018-04-25 12:54 ` [PATCH v3 10/15] ARM: dts: dra7-evm: Model EVM_3V6 regulator Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 11/15] ARM: dts: dra7-evm: Add wilink8 wlan support Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 14:47   ` Rob Herring
2018-04-25 14:47     ` Rob Herring
2018-04-27 11:20     ` Kishon Vijay Abraham I
2018-04-27 11:20       ` Kishon Vijay Abraham I
2018-04-25 12:54 ` Kishon Vijay Abraham I [this message]
2018-04-25 12:54   ` [PATCH v3 12/15] ARM: dts: dra76-evm: " Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 13/15] ARM: dts: dra7: Use sdhci-omap programming model Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 14/15] ARM: dts: dra7: Add high speed modes capability to MMC1/MMC2 dt node Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54 ` [PATCH v3 15/15] Documentation: ARM: Add new MMC requirements for DRA7/K2G Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 12:54   ` Kishon Vijay Abraham I
2018-04-25 13:32   ` [PATCH v4 " Kishon Vijay Abraham I
2018-04-25 13:32     ` Kishon Vijay Abraham I
2018-04-25 13:32     ` Kishon Vijay Abraham I

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180425125449.19755-13-kishon@ti.com \
    --to=kishon@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=corbet@lwn.net \
    --cc=devicetree@vger.kernel.org \
    --cc=linux-doc@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mmc@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    --cc=vishalm@ti.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.