From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: <tony@atomide.com> Cc: <bcousson@baylibre.com>, <linux-omap@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <j-keerthy@ti.com> Subject: [PATCH 1/4] ARM: dts: am437x-gp-evm: Fixup (again) tps65218 irq type Date: Tue, 8 May 2018 16:20:50 +0300 [thread overview] Message-ID: <20180508132053.5471-2-peter.ujfalusi@ti.com> (raw) In-Reply-To: <20180508132053.5471-1-peter.ujfalusi@ti.com> While the correct IRQ level fixed the WARN_ON(), but prevented the probe of tps65218 as GIC_SPI does not support LEVEL_LOW (?) Use LEVEL_HIGH as it looks to be the accurate one since the INTn of TPS is connected to NMIn of the SoC. Fixes: 5692b911c980 ("ARM: dts: am437x-gp-evm: Correct tps65218 irq type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index d0192e07adc6..60414b1ca404 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -543,7 +543,7 @@ tps65218: tps65218@24 { reg = <0x24>; compatible = "ti,tps65218"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; /* NMIn */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */ interrupt-controller; #interrupt-cells = <2>; -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
WARNING: multiple messages have this Message-ID (diff)
From: Peter Ujfalusi <peter.ujfalusi@ti.com> To: tony@atomide.com Cc: bcousson@baylibre.com, linux-omap@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, j-keerthy@ti.com Subject: [PATCH 1/4] ARM: dts: am437x-gp-evm: Fixup (again) tps65218 irq type Date: Tue, 8 May 2018 16:20:50 +0300 [thread overview] Message-ID: <20180508132053.5471-2-peter.ujfalusi@ti.com> (raw) In-Reply-To: <20180508132053.5471-1-peter.ujfalusi@ti.com> While the correct IRQ level fixed the WARN_ON(), but prevented the probe of tps65218 as GIC_SPI does not support LEVEL_LOW (?) Use LEVEL_HIGH as it looks to be the accurate one since the INTn of TPS is connected to NMIn of the SoC. Fixes: 5692b911c980 ("ARM: dts: am437x-gp-evm: Correct tps65218 irq type") Signed-off-by: Peter Ujfalusi <peter.ujfalusi@ti.com> --- arch/arm/boot/dts/am437x-gp-evm.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index d0192e07adc6..60414b1ca404 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -543,7 +543,7 @@ tps65218: tps65218@24 { reg = <0x24>; compatible = "ti,tps65218"; - interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_LOW>; /* NMIn */ + interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>; /* NMIn */ interrupt-controller; #interrupt-cells = <2>; -- Peter Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
next prev parent reply other threads:[~2018-05-08 13:20 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-08 13:20 [PATCH 0/4] ARM: dts: am437x boards: Correct (again) tps65218 irq type Peter Ujfalusi 2018-05-08 13:20 ` Peter Ujfalusi 2018-05-08 13:20 ` Peter Ujfalusi [this message] 2018-05-08 13:20 ` [PATCH 1/4] ARM: dts: am437x-gp-evm: Fixup " Peter Ujfalusi 2018-05-08 13:20 ` [PATCH 2/4] ARM: dts: am437x-cm-t43: " Peter Ujfalusi 2018-05-08 13:20 ` Peter Ujfalusi 2018-05-08 13:20 ` [PATCH 3/4] ARM: dts: am437x-epos-evm: " Peter Ujfalusi 2018-05-08 13:20 ` Peter Ujfalusi 2018-05-08 13:20 ` [PATCH 4/4] Revert "ARM: dts: am437x-sk-evm: Correct tps65218 irq type" Peter Ujfalusi 2018-05-08 13:20 ` Peter Ujfalusi 2018-05-08 14:16 ` [PATCH 0/4] ARM: dts: am437x boards: Correct (again) tps65218 irq type Tony Lindgren 2018-05-09 4:00 ` Keerthy 2018-05-09 4:00 ` Keerthy 2018-05-15 18:15 ` Tony Lindgren
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180508132053.5471-2-peter.ujfalusi@ti.com \ --to=peter.ujfalusi@ti.com \ --cc=bcousson@baylibre.com \ --cc=devicetree@vger.kernel.org \ --cc=j-keerthy@ti.com \ --cc=linux-kernel@vger.kernel.org \ --cc=linux-omap@vger.kernel.org \ --cc=tony@atomide.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.