All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jerome Brunet <jbrunet@baylibre.com>
To: Kevin Hilman <khilman@baylibre.com>, Carlo Caione <carlo@caione.org>
Cc: Jerome Brunet <jbrunet@baylibre.com>,
	devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v2 1/4] ARM64: dts: meson-axg: clean-up i2c nodes
Date: Thu, 17 May 2018 11:30:57 +0200	[thread overview]
Message-ID: <20180517093100.22225-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20180517093100.22225-1-jbrunet@baylibre.com>

Remove undocumented and unused "clk_i2c" clock name and the second
interrupt from i2c nodes of meson-axg platform. Those seems to have
been copy/pasted from the vendor kernel

Fixes: dc6f858e2690 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 37 +++++++++++-------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 381bd2c707a7..b59f341104d7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -214,50 +214,42 @@
 
 			i2c0: i2c@1f000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1f000 0x0 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			i2c1: i2c@1e000 {
 				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				reg = <0x0 0x1e000 0x0 0x20>;
 				status = "disabled";
-				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
 			};
 
 			i2c2: i2c@1d000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1d000 0x0 0x20>;
-				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			i2c3: i2c@1c000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1c000 0x0 0x20>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			uart_A: serial@24000 {
@@ -1116,13 +1108,12 @@
 
 			i2c_AO: i2c@5000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x05000 0x0 0x20>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			uart_AO: serial@3000 {
-- 
2.14.3

WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 1/4] ARM64: dts: meson-axg: clean-up i2c nodes
Date: Thu, 17 May 2018 11:30:57 +0200	[thread overview]
Message-ID: <20180517093100.22225-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20180517093100.22225-1-jbrunet@baylibre.com>

Remove undocumented and unused "clk_i2c" clock name and the second
interrupt from i2c nodes of meson-axg platform. Those seems to have
been copy/pasted from the vendor kernel

Fixes: dc6f858e2690 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 37 +++++++++++-------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 381bd2c707a7..b59f341104d7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -214,50 +214,42 @@
 
 			i2c0: i2c at 1f000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1f000 0x0 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			i2c1: i2c at 1e000 {
 				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				reg = <0x0 0x1e000 0x0 0x20>;
 				status = "disabled";
-				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
 			};
 
 			i2c2: i2c at 1d000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1d000 0x0 0x20>;
-				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			i2c3: i2c at 1c000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1c000 0x0 0x20>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			uart_A: serial at 24000 {
@@ -1116,13 +1108,12 @@
 
 			i2c_AO: i2c at 5000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x05000 0x0 0x20>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			uart_AO: serial at 3000 {
-- 
2.14.3

WARNING: multiple messages have this Message-ID (diff)
From: jbrunet@baylibre.com (Jerome Brunet)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH v2 1/4] ARM64: dts: meson-axg: clean-up i2c nodes
Date: Thu, 17 May 2018 11:30:57 +0200	[thread overview]
Message-ID: <20180517093100.22225-2-jbrunet@baylibre.com> (raw)
In-Reply-To: <20180517093100.22225-1-jbrunet@baylibre.com>

Remove undocumented and unused "clk_i2c" clock name and the second
interrupt from i2c nodes of meson-axg platform. Those seems to have
been copy/pasted from the vendor kernel

Fixes: dc6f858e2690 ("ARM64: dts: meson-axg: add I2C DT info for Meson-AXG SoC")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
---
 arch/arm64/boot/dts/amlogic/meson-axg.dtsi | 37 +++++++++++-------------------
 1 file changed, 14 insertions(+), 23 deletions(-)

diff --git a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
index 381bd2c707a7..b59f341104d7 100644
--- a/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
+++ b/arch/arm64/boot/dts/amlogic/meson-axg.dtsi
@@ -214,50 +214,42 @@
 
 			i2c0: i2c at 1f000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1f000 0x0 0x20>;
-				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 47 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 21 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			i2c1: i2c at 1e000 {
 				compatible = "amlogic,meson-axg-i2c";
+				reg = <0x0 0x1e000 0x0 0x20>;
+				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				reg = <0x0 0x1e000 0x0 0x20>;
 				status = "disabled";
-				interrupts = <GIC_SPI 214 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 48 IRQ_TYPE_EDGE_RISING>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
 			};
 
 			i2c2: i2c at 1d000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1d000 0x0 0x20>;
-				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 49 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 215 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			i2c3: i2c at 1c000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x1c000 0x0 0x20>;
-				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>,
-					<GIC_SPI 50 IRQ_TYPE_EDGE_RISING>;
+				interrupts = <GIC_SPI 39 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			uart_A: serial at 24000 {
@@ -1116,13 +1108,12 @@
 
 			i2c_AO: i2c at 5000 {
 				compatible = "amlogic,meson-axg-i2c";
-				status = "disabled";
 				reg = <0x0 0x05000 0x0 0x20>;
 				interrupts = <GIC_SPI 195 IRQ_TYPE_EDGE_RISING>;
+				clocks = <&clkc CLKID_I2C>;
 				#address-cells = <1>;
 				#size-cells = <0>;
-				clocks = <&clkc CLKID_I2C>;
-				clock-names = "clk_i2c";
+				status = "disabled";
 			};
 
 			uart_AO: serial at 3000 {
-- 
2.14.3

  reply	other threads:[~2018-05-17  9:31 UTC|newest]

Thread overview: 18+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-17  9:30 [PATCH v2 0/4] ARM64: dts: meson-axg: i2c updates Jerome Brunet
2018-05-17  9:30 ` Jerome Brunet
2018-05-17  9:30 ` Jerome Brunet
2018-05-17  9:30 ` Jerome Brunet [this message]
2018-05-17  9:30   ` [PATCH v2 1/4] ARM64: dts: meson-axg: clean-up i2c nodes Jerome Brunet
2018-05-17  9:30   ` Jerome Brunet
2018-05-17  9:30 ` [PATCH v2 2/4] ARM64: dts: meson-axg: correct i2c AO clock Jerome Brunet
2018-05-17  9:30   ` Jerome Brunet
2018-05-17  9:30   ` Jerome Brunet
2018-05-17  9:30 ` [PATCH v2 3/4] ARM64: dts: meson-axg: add i2c AO pins Jerome Brunet
2018-05-17  9:30   ` Jerome Brunet
2018-05-17  9:30   ` Jerome Brunet
2018-05-17  9:31 ` [PATCH v2 4/4] ARM64: dts: meson-axg: enable i2c AO on the S400 board Jerome Brunet
2018-05-17  9:31   ` Jerome Brunet
2018-05-17  9:31   ` Jerome Brunet
2018-05-23 17:06 ` [PATCH v2 0/4] ARM64: dts: meson-axg: i2c updates Kevin Hilman
2018-05-23 17:06   ` Kevin Hilman
2018-05-23 17:06   ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180517093100.22225-2-jbrunet@baylibre.com \
    --to=jbrunet@baylibre.com \
    --cc=carlo@caione.org \
    --cc=devicetree@vger.kernel.org \
    --cc=khilman@baylibre.com \
    --cc=linux-amlogic@lists.infradead.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.