From: Rui Miguel Silva <rui.silva@linaro.org> To: mchehab@kernel.org, sakari.ailus@linux.intel.com, Steve Longerbeam <slongerbeam@gmail.com>, Philipp Zabel <p.zabel@pengutronix.de>, Rob Herring <robh+dt@kernel.org> Cc: devel@driverdev.osuosl.org, devicetree@vger.kernel.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Ryan Harkin <ryan.harkin@linaro.org>, Rui Miguel Silva <rui.silva@linaro.org>, Fabio Estevam <fabio.estevam@nxp.com>, Shawn Guo <shawnguo@kernel.org>, linux-media@vger.kernel.org Subject: [PATCH v4 10/12] ARM: dts: imx7s-warp: add ov2680 sensor node Date: Thu, 17 May 2018 13:50:31 +0100 [thread overview] Message-ID: <20180517125033.18050-11-rui.silva@linaro.org> (raw) In-Reply-To: <20180517125033.18050-1-rui.silva@linaro.org> Warp7 comes with a Omnivision OV2680 sensor, add the node here to make complete the camera data path for this system. Add the needed regulator to the analog voltage supply, the port and endpoints in mipi_csi node and the pinctrl for the reset gpio. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> --- arch/arm/boot/dts/imx7s-warp.dts | 44 ++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index cb175ee2fc9d..bf04e13afd02 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -91,6 +91,14 @@ regulator-always-on; }; + reg_peri_3p15v: regulator-peri-3p15v { + compatible = "regulator-fixed"; + regulator-name = "peri_3p15v_reg"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -218,6 +226,27 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov2680: camera@36 { + compatible = "ovti,ov2680"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov2680>; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; }; &i2c4 { @@ -352,6 +381,15 @@ #size-cells = <0>; fsl,csis-hs-settle = <3>; + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + port@1 { reg = <1>; @@ -408,6 +446,12 @@ >; }; + pinctrl_ov2680: ov2660grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14 + >; + }; + pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f -- 2.17.0
WARNING: multiple messages have this Message-ID (diff)
From: Rui Miguel Silva <rui.silva@linaro.org> To: mchehab@kernel.org, sakari.ailus@linux.intel.com, Steve Longerbeam <slongerbeam@gmail.com>, Philipp Zabel <p.zabel@pengutronix.de>, Rob Herring <robh+dt@kernel.org> Cc: linux-media@vger.kernel.org, devel@driverdev.osuosl.org, Shawn Guo <shawnguo@kernel.org>, Fabio Estevam <fabio.estevam@nxp.com>, devicetree@vger.kernel.org, Greg Kroah-Hartman <gregkh@linuxfoundation.org>, Ryan Harkin <ryan.harkin@linaro.org>, Rui Miguel Silva <rui.silva@linaro.org> Subject: [PATCH v4 10/12] ARM: dts: imx7s-warp: add ov2680 sensor node Date: Thu, 17 May 2018 13:50:31 +0100 [thread overview] Message-ID: <20180517125033.18050-11-rui.silva@linaro.org> (raw) In-Reply-To: <20180517125033.18050-1-rui.silva@linaro.org> Warp7 comes with a Omnivision OV2680 sensor, add the node here to make complete the camera data path for this system. Add the needed regulator to the analog voltage supply, the port and endpoints in mipi_csi node and the pinctrl for the reset gpio. Signed-off-by: Rui Miguel Silva <rui.silva@linaro.org> --- arch/arm/boot/dts/imx7s-warp.dts | 44 ++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/arch/arm/boot/dts/imx7s-warp.dts b/arch/arm/boot/dts/imx7s-warp.dts index cb175ee2fc9d..bf04e13afd02 100644 --- a/arch/arm/boot/dts/imx7s-warp.dts +++ b/arch/arm/boot/dts/imx7s-warp.dts @@ -91,6 +91,14 @@ regulator-always-on; }; + reg_peri_3p15v: regulator-peri-3p15v { + compatible = "regulator-fixed"; + regulator-name = "peri_3p15v_reg"; + regulator-min-microvolt = <3150000>; + regulator-max-microvolt = <3150000>; + regulator-always-on; + }; + sound { compatible = "simple-audio-card"; simple-audio-card,name = "imx7-sgtl5000"; @@ -218,6 +226,27 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_i2c2>; status = "okay"; + + ov2680: camera@36 { + compatible = "ovti,ov2680"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ov2680>; + reg = <0x36>; + clocks = <&osc>; + clock-names = "xvclk"; + reset-gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; + DOVDD-supply = <&sw2_reg>; + DVDD-supply = <&sw2_reg>; + AVDD-supply = <®_peri_3p15v>; + + port { + ov2680_to_mipi: endpoint { + remote-endpoint = <&mipi_from_sensor>; + clock-lanes = <0>; + data-lanes = <1>; + }; + }; + }; }; &i2c4 { @@ -352,6 +381,15 @@ #size-cells = <0>; fsl,csis-hs-settle = <3>; + port@0 { + reg = <0>; + + mipi_from_sensor: endpoint { + remote-endpoint = <&ov2680_to_mipi>; + data-lanes = <1>; + }; + }; + port@1 { reg = <1>; @@ -408,6 +446,12 @@ >; }; + pinctrl_ov2680: ov2660grp { + fsl,pins = < + MX7D_PAD_LPSR_GPIO1_IO03__GPIO1_IO3 0x14 + >; + }; + pinctrl_sai1: sai1grp { fsl,pins = < MX7D_PAD_SAI1_RX_DATA__SAI1_RX_DATA0 0x1f -- 2.17.0
next prev parent reply other threads:[~2018-05-17 12:50 UTC|newest] Thread overview: 49+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-05-17 12:50 [PATCH v4 00/12] media: staging/imx7: add i.MX7 media driver Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 01/12] media: staging/imx: refactor imx media device probe Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 02/12] media: staging/imx7: add imx7 CSI subdev driver Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 03/12] clk: imx7d: fix mipi dphy div parent Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 18:05 ` Stephen Boyd 2018-05-17 18:05 ` Stephen Boyd 2018-05-17 18:05 ` Stephen Boyd 2018-05-18 8:30 ` Rui Miguel Silva 2018-05-18 8:30 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 04/12] clk: imx7d: reset parent for mipi csi root Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 05/12] media: staging/imx7: add MIPI CSI-2 receiver subdev for i.MX7 Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 06/12] media: dt-bindings: add bindings for i.MX7 media driver Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-18 6:58 ` Sakari Ailus 2018-05-18 6:58 ` Sakari Ailus 2018-05-18 8:27 ` Rui Miguel Silva 2018-05-18 8:27 ` Rui Miguel Silva 2018-05-18 22:13 ` Sakari Ailus 2018-05-18 22:13 ` Sakari Ailus 2018-05-22 13:19 ` Rui Miguel Silva 2018-05-22 13:19 ` Rui Miguel Silva 2018-05-22 14:08 ` Sakari Ailus 2018-05-22 14:08 ` Sakari Ailus 2019-03-10 21:48 ` Laurent Pinchart 2019-03-10 21:48 ` Laurent Pinchart 2019-03-12 14:07 ` Rui Miguel Silva 2019-03-12 14:07 ` Rui Miguel Silva 2019-03-12 15:10 ` Laurent Pinchart 2019-03-12 15:10 ` Laurent Pinchart 2019-03-12 15:37 ` Rui Miguel Silva 2019-03-12 15:37 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 07/12] ARM: dts: imx7s: add mipi phy power domain Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 08/12] ARM: dts: imx7s: add multiplexer controls Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 09/12] ARM: dts: imx7: Add video mux, csi and mipi_csi and connections Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva [this message] 2018-05-17 12:50 ` [PATCH v4 10/12] ARM: dts: imx7s-warp: add ov2680 sensor node Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 11/12] media: imx7.rst: add documentation for i.MX7 media driver Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva 2018-05-17 12:50 ` [PATCH v4 12/12] media: staging/imx: add i.MX7 entries to TODO file Rui Miguel Silva 2018-05-17 12:50 ` Rui Miguel Silva
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180517125033.18050-11-rui.silva@linaro.org \ --to=rui.silva@linaro.org \ --cc=devel@driverdev.osuosl.org \ --cc=devicetree@vger.kernel.org \ --cc=fabio.estevam@nxp.com \ --cc=gregkh@linuxfoundation.org \ --cc=linux-media@vger.kernel.org \ --cc=mchehab@kernel.org \ --cc=p.zabel@pengutronix.de \ --cc=robh+dt@kernel.org \ --cc=ryan.harkin@linaro.org \ --cc=sakari.ailus@linux.intel.com \ --cc=shawnguo@kernel.org \ --cc=slongerbeam@gmail.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.