All of lore.kernel.org
 help / color / mirror / Atom feed
From: Bjorn Andersson <bjorn.andersson@linaro.org>
To: Stanimir Varbanov <svarbanov@mm-sol.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Bjorn Helgaas <bhelgaas@google.com>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>,
	linux-pci@vger.kernel.org, linux-arm-msm@vger.kernel.org,
	linux-kernel@vger.kernel.org
Subject: [PATCH] PCI: qcom: Fix error handling in pm_runtime support
Date: Fri, 25 May 2018 12:09:34 -0700	[thread overview]
Message-ID: <20180525190934.1042-1-bjorn.andersson@linaro.org> (raw)
In-Reply-To: <20180523104425.6650-1-srinivas.kandagatla@linaro.org>

The driver does not cope with the fact that probe can fail in a number
of cases after enabling pm_runtime on the device, this results in
warnings about "Unbalanced pm_runtime_enable". Further more if probe
fails after invoking host_init the power-domain will be left referenced.

As it's not possible for the error handling in qcom_pcie_host_init() to
handle errors happening after returning from that function the
pm_runtime_get_sync() is moved to probe() as well.

Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
---

I'm sorry for not spotting this last week when we discussed the previous patch.

 drivers/pci/dwc/pcie-qcom.c | 65 ++++++++++++++++++++++++++-----------
 1 file changed, 46 insertions(+), 19 deletions(-)

diff --git a/drivers/pci/dwc/pcie-qcom.c b/drivers/pci/dwc/pcie-qcom.c
index 3f35098b71b1..f2453196278f 100644
--- a/drivers/pci/dwc/pcie-qcom.c
+++ b/drivers/pci/dwc/pcie-qcom.c
@@ -1088,8 +1088,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	struct qcom_pcie *pcie = to_qcom_pcie(pci);
 	int ret;
 
-	pm_runtime_get_sync(pci->dev);
-
 	qcom_ep_reset_assert(pcie);
 
 	ret = pcie->ops->init(pcie);
@@ -1126,7 +1124,6 @@ static int qcom_pcie_host_init(struct pcie_port *pp)
 	phy_power_off(pcie->phy);
 err_deinit:
 	pcie->ops->deinit(pcie);
-	pm_runtime_put_sync(pci->dev);
 
 	return ret;
 }
@@ -1207,7 +1204,6 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	struct qcom_pcie *pcie;
 	int ret;
 
-
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
 		return -ENOMEM;
@@ -1217,6 +1213,7 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 		return -ENOMEM;
 
 	pm_runtime_enable(dev);
+	pm_runtime_get_sync(dev);
 
 	pci->dev = dev;
 	pci->ops = &dw_pcie_ops;
@@ -1227,53 +1224,82 @@ static int qcom_pcie_probe(struct platform_device *pdev)
 	pcie->ops = of_device_get_match_data(dev);
 
 	pcie->reset = devm_gpiod_get_optional(dev, "perst", GPIOD_OUT_LOW);
-	if (IS_ERR(pcie->reset))
-		return PTR_ERR(pcie->reset);
+	if (IS_ERR(pcie->reset)) {
+		ret = PTR_ERR(pcie->reset);
+		goto err_pm_runtime_put;
+	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "parf");
 	pcie->parf = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pcie->parf))
-		return PTR_ERR(pcie->parf);
+	if (IS_ERR(pcie->parf)) {
+		ret = PTR_ERR(pcie->parf);
+		goto err_pm_runtime_put;
+	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
 	pci->dbi_base = devm_pci_remap_cfg_resource(dev, res);
-	if (IS_ERR(pci->dbi_base))
-		return PTR_ERR(pci->dbi_base);
+	if (IS_ERR(pci->dbi_base)) {
+		ret = PTR_ERR(pci->dbi_base);
+		goto err_pm_runtime_put;
+	}
 
 	res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "elbi");
 	pcie->elbi = devm_ioremap_resource(dev, res);
-	if (IS_ERR(pcie->elbi))
-		return PTR_ERR(pcie->elbi);
+	if (IS_ERR(pcie->elbi)) {
+		ret = PTR_ERR(pcie->elbi);
+		goto err_pm_runtime_put;
+	}
 
 	pcie->phy = devm_phy_optional_get(dev, "pciephy");
-	if (IS_ERR(pcie->phy))
-		return PTR_ERR(pcie->phy);
+	if (IS_ERR(pcie->phy)) {
+		ret = PTR_ERR(pcie->phy);
+		goto err_pm_runtime_put;
+	}
 
 	ret = pcie->ops->get_resources(pcie);
 	if (ret)
-		return ret;
+		goto err_pm_runtime_put;
 
 	pp->root_bus_nr = -1;
 	pp->ops = &qcom_pcie_dw_ops;
 
 	if (IS_ENABLED(CONFIG_PCI_MSI)) {
 		pp->msi_irq = platform_get_irq_byname(pdev, "msi");
-		if (pp->msi_irq < 0)
-			return pp->msi_irq;
+		if (pp->msi_irq < 0) {
+			ret = pp->msi_irq;
+			goto err_pm_runtime_put;
+		}
 	}
 
 	ret = phy_init(pcie->phy);
 	if (ret)
-		return ret;
+		goto err_pm_runtime_put;
 
 	platform_set_drvdata(pdev, pcie);
 
 	ret = dw_pcie_host_init(pp);
 	if (ret) {
 		dev_err(dev, "cannot initialize host\n");
-		return ret;
+		goto err_pm_runtime_put;
 	}
 
+	return 0;
+
+err_pm_runtime_put:
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
+	return ret;
+}
+
+static int qcom_pcie_remove(struct platform_device *pdev)
+{
+	struct qcom_pcie *pcie = platform_get_drvdata(pdev);
+	struct device *dev = pcie->pci->dev;
+
+	pm_runtime_put(dev);
+	pm_runtime_disable(dev);
+
 	return 0;
 }
 
@@ -1289,6 +1315,7 @@ static const struct of_device_id qcom_pcie_match[] = {
 
 static struct platform_driver qcom_pcie_driver = {
 	.probe = qcom_pcie_probe,
+	.remove = qcom_pcie_remove,
 	.driver = {
 		.name = "qcom-pcie",
 		.suppress_bind_attrs = true,
-- 
2.17.0

  parent reply	other threads:[~2018-05-25 19:09 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-23 10:44 [PATCH v2] PCI: qcom: add runtime pm support to pcie_port Srinivas Kandagatla
2018-05-23 13:36 ` Vinod
2018-05-23 13:54 ` Stanimir Varbanov
2018-05-23 15:49 ` Lorenzo Pieralisi
2018-05-25 19:09 ` Bjorn Andersson [this message]
2018-06-29  9:56   ` [PATCH] PCI: qcom: Fix error handling in pm_runtime support Lorenzo Pieralisi
2018-06-29 11:22   ` Stanimir Varbanov

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180525190934.1042-1-bjorn.andersson@linaro.org \
    --to=bjorn.andersson@linaro.org \
    --cc=bhelgaas@google.com \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=srinivas.kandagatla@linaro.org \
    --cc=svarbanov@mm-sol.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.