From: Enric Balletbo i Serra <enric.balletbo@collabora.com>
To: linux-kernel@vger.kernel.org
Cc: kernel@collabora.com, devicetree@vger.kernel.org,
"Benoît Cousson" <bcousson@baylibre.com>,
"Rob Herring" <robh+dt@kernel.org>,
"Tony Lindgren" <tony@atomide.com>,
"Mark Rutland" <mark.rutland@arm.com>,
linux-omap@vger.kernel.org
Subject: [PATCH 7/8] ARM: dts: am335x-sl50: fix label names for all LEDs.
Date: Wed, 6 Jun 2018 17:54:12 +0200 [thread overview]
Message-ID: <20180606155413.23542-7-enric.balletbo@collabora.com> (raw)
In-Reply-To: <20180606155413.23542-1-enric.balletbo@collabora.com>
Fix the label for all LEDs, we made a mistake setting the label names on
all LEDs, where says green should say red, and viceversa, where says red
should be green.
Signed-off-by: Enric Balletbo i Serra <enric.balletbo@collabora.com>
---
arch/arm/boot/dts/am335x-sl50.dts | 14 ++++++++++----
1 file changed, 10 insertions(+), 4 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-sl50.dts b/arch/arm/boot/dts/am335x-sl50.dts
index 495a4a0be25c..e11a6def36a4 100644
--- a/arch/arm/boot/dts/am335x-sl50.dts
+++ b/arch/arm/boot/dts/am335x-sl50.dts
@@ -33,25 +33,25 @@
pinctrl-0 = <&led_pins>;
led0 {
- label = "sl50:green:usr0";
+ label = "sl50:red:usr0";
gpios = <&gpio1 21 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led1 {
- label = "sl50:red:usr1";
+ label = "sl50:green:usr1";
gpios = <&gpio1 22 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led2 {
- label = "sl50:green:usr2";
+ label = "sl50:red:usr2";
gpios = <&gpio1 23 GPIO_ACTIVE_LOW>;
default-state = "off";
};
led3 {
- label = "sl50:red:usr3";
+ label = "sl50:green:usr3";
gpios = <&gpio1 24 GPIO_ACTIVE_LOW>;
default-state = "off";
};
@@ -430,6 +430,12 @@
/* PDI Bus - Battery system */
AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* nBattReset gpmc_a0.gpio1_16 */
AM33XX_IOPAD(0x83c, PIN_INPUT_PULLUP | MUX_MODE7) /* BattPDIData gpmc_ad15.gpio1_15 */
+ /* FPGA */
+ AM33XX_IOPAD(0x820, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_DONE - gpmc_ad8.gpio0_22 */
+ AM33XX_IOPAD(0x840, PIN_INPUT_PULLUP | MUX_MODE7) /* FPGA_NRST - gpmc_a0.gpio1_16 */
+ AM33XX_IOPAD(0x844, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_RUN - gpmc_a1.gpio1_17 */
+ AM33XX_IOPAD(0x864, PIN_INPUT_PULLUP | MUX_MODE7) /* ENFPGA - gpmc_a9.gpio1_25 */
+ AM33XX_IOPAD(0x868, PIN_INPUT_PULLDOWN | MUX_MODE7) /* FPGA_PROGRAM - gpmc_a10.gpio1_26 */
>;
};
};
--
2.17.1
next prev parent reply other threads:[~2018-06-06 15:54 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-06-06 15:54 [PATCH 1/8] ARM: dts: am335x-sl50: update backlight nodes Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 2/8] ARM: dts: am335x-sl50: use phy-phandle declarations Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 3/8] ARM: dts: am335x-sl50: add a node for the LCD controller Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 4/8] ARM: dts: am335x-sl50: set dr_mode to otg Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 5/8] ARM: dts: am335x-sl50: add support for DS1339 Real Time Clock Enric Balletbo i Serra
2018-06-06 15:54 ` [PATCH 6/8] ARM: dts: am335x-sl50: use audio-graph-card for sound Enric Balletbo i Serra
2018-06-06 15:54 ` Enric Balletbo i Serra [this message]
2018-06-06 15:54 ` [PATCH 8/8] ARM: dts: am335x-sl50: enable tsadc on SL50 board Enric Balletbo i Serra
2018-07-03 7:18 ` [PATCH 1/8] ARM: dts: am335x-sl50: update backlight nodes Tony Lindgren
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180606155413.23542-7-enric.balletbo@collabora.com \
--to=enric.balletbo@collabora.com \
--cc=bcousson@baylibre.com \
--cc=devicetree@vger.kernel.org \
--cc=kernel@collabora.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=tony@atomide.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.