All of lore.kernel.org
 help / color / mirror / Atom feed
From: Stafford Horne <shorne@gmail.com>
To: Peter Maydell <peter.maydell@linaro.org>
Cc: QEMU Development <qemu-devel@nongnu.org>,
	Richard Henderson <richard.henderson@linaro.org>,
	Stafford Horne <shorne@gmail.com>,
	Riku Voipio <riku.voipio@iki.fi>,
	Laurent Vivier <laurent@vivier.eu>
Subject: [Qemu-devel] [PULL v2 22/25] linux-user: Implement signals for openrisc
Date: Tue,  3 Jul 2018 00:10:20 +0900	[thread overview]
Message-ID: <20180702151023.24532-23-shorne@gmail.com> (raw)
In-Reply-To: <20180702151023.24532-1-shorne@gmail.com>

From: Richard Henderson <richard.henderson@linaro.org>

All of the existing code was boilerplate from elsewhere,
and would crash the guest upon the first signal.

Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stafford Horne <shorne@gmail.com>

---
v2:
  Add a comment to the new definition of target_pt_regs.
  Install the signal mask into the ucontext.
v3:
  Incorporate feedback from Laurent.
---
 linux-user/openrisc/signal.c         | 217 +++++++++++----------------
 linux-user/openrisc/target_syscall.h |  28 +---
 linux-user/signal.c                  |   2 +-
 target/openrisc/cpu.c                |   1 +
 4 files changed, 94 insertions(+), 154 deletions(-)

diff --git a/linux-user/openrisc/signal.c b/linux-user/openrisc/signal.c
index 8be0b74001..232ad82b98 100644
--- a/linux-user/openrisc/signal.c
+++ b/linux-user/openrisc/signal.c
@@ -21,124 +21,69 @@
 #include "signal-common.h"
 #include "linux-user/trace.h"
 
-struct target_sigcontext {
+typedef struct target_sigcontext {
     struct target_pt_regs regs;
     abi_ulong oldmask;
-    abi_ulong usp;
-};
+} target_sigcontext;
 
-struct target_ucontext {
+typedef struct target_ucontext {
     abi_ulong tuc_flags;
     abi_ulong tuc_link;
     target_stack_t tuc_stack;
-    struct target_sigcontext tuc_mcontext;
+    target_sigcontext tuc_mcontext;
     target_sigset_t tuc_sigmask;   /* mask last for extensibility */
-};
+} target_ucontext;
 
-struct target_rt_sigframe {
-    abi_ulong pinfo;
-    uint64_t puc;
+typedef struct target_rt_sigframe {
     struct target_siginfo info;
-    struct target_sigcontext sc;
-    struct target_ucontext uc;
-    unsigned char retcode[16];  /* trampoline code */
-};
-
-/* This is the asm-generic/ucontext.h version */
-#if 0
-static int restore_sigcontext(CPUOpenRISCState *regs,
-                              struct target_sigcontext *sc)
-{
-    unsigned int err = 0;
-    unsigned long old_usp;
-
-    /* Alwys make any pending restarted system call return -EINTR */
-    current_thread_info()->restart_block.fn = do_no_restart_syscall;
+    target_ucontext uc;
+    uint32_t retcode[4];  /* trampoline code */
+} target_rt_sigframe;
 
-    /* restore the regs from &sc->regs (same as sc, since regs is first)
-     * (sc is already checked for VERIFY_READ since the sigframe was
-     *  checked in sys_sigreturn previously)
-     */
+static void restore_sigcontext(CPUOpenRISCState *env, target_sigcontext *sc)
+{
+    int i;
+    abi_ulong v;
 
-    if (copy_from_user(regs, &sc, sizeof(struct target_pt_regs))) {
-        goto badframe;
+    for (i = 0; i < 32; ++i) {
+        __get_user(v, &sc->regs.gpr[i]);
+        cpu_set_gpr(env, i, v);
     }
+    __get_user(env->pc, &sc->regs.pc);
 
-    /* make sure the U-flag is set so user-mode cannot fool us */
-
-    regs->sr &= ~SR_SM;
-
-    /* restore the old USP as it was before we stacked the sc etc.
-     * (we cannot just pop the sigcontext since we aligned the sp and
-     *  stuff after pushing it)
-     */
-
-    __get_user(old_usp, &sc->usp);
-    phx_signal("old_usp 0x%lx", old_usp);
-
-    __PHX__ REALLY           /* ??? */
-    wrusp(old_usp);
-    regs->gpr[1] = old_usp;
-
-    /* TODO: the other ports use regs->orig_XX to disable syscall checks
-     * after this completes, but we don't use that mechanism. maybe we can
-     * use it now ?
-     */
-
-    return err;
-
-badframe:
-    return 1;
+    /* Make sure the supervisor flag is clear.  */
+    __get_user(v, &sc->regs.sr);
+    cpu_set_sr(env, v & ~SR_SM);
 }
-#endif
 
 /* Set up a signal frame.  */
 
-static void setup_sigcontext(struct target_sigcontext *sc,
-                             CPUOpenRISCState *regs,
-                             unsigned long mask)
+static void setup_sigcontext(target_sigcontext *sc, CPUOpenRISCState *env)
 {
-    unsigned long usp = cpu_get_gpr(regs, 1);
-
-    /* copy the regs. they are first in sc so we can use sc directly */
+    int i;
 
-    /*copy_to_user(&sc, regs, sizeof(struct target_pt_regs));*/
-
-    /* Set the frametype to CRIS_FRAME_NORMAL for the execution of
-       the signal handler. The frametype will be restored to its previous
-       value in restore_sigcontext. */
-    /*regs->frametype = CRIS_FRAME_NORMAL;*/
-
-    /* then some other stuff */
-    __put_user(mask, &sc->oldmask);
-    __put_user(usp, &sc->usp);
-}
+    for (i = 0; i < 32; ++i) {
+        __put_user(cpu_get_gpr(env, i), &sc->regs.gpr[i]);
+    }
 
-static inline unsigned long align_sigframe(unsigned long sp)
-{
-    return sp & ~3UL;
+    __put_user(env->pc, &sc->regs.pc);
+    __put_user(cpu_get_sr(env), &sc->regs.sr);
 }
 
 static inline abi_ulong get_sigframe(struct target_sigaction *ka,
-                                     CPUOpenRISCState *regs,
+                                     CPUOpenRISCState *env,
                                      size_t frame_size)
 {
-    unsigned long sp = get_sp_from_cpustate(regs);
-    int onsigstack = on_sig_stack(sp);
-
-    /* redzone */
-    sp = target_sigsp(sp, ka);
-
-    sp = align_sigframe(sp - frame_size);
+    target_ulong sp = get_sp_from_cpustate(env);
 
-    /*
-     * If we are on the alternate signal stack and would overflow it, don't.
-     * Return an always-bogus address instead so we will die with SIGSEGV.
+    /* Honor redzone now.  If we swap to signal stack, no need to waste
+     * the 128 bytes by subtracting afterward.
      */
+    sp -= 128;
 
-    if (onsigstack && !likely(on_sig_stack(sp))) {
-        return -1L;
-    }
+    sp = target_sigsp(sp, ka);
+    sp -= frame_size;
+    sp = QEMU_ALIGN_DOWN(sp, 4);
 
     return sp;
 }
@@ -147,11 +92,9 @@ void setup_rt_frame(int sig, struct target_sigaction *ka,
                     target_siginfo_t *info,
                     target_sigset_t *set, CPUOpenRISCState *env)
 {
-    int err = 0;
     abi_ulong frame_addr;
-    unsigned long return_ip;
-    struct target_rt_sigframe *frame;
-    abi_ulong info_addr, uc_addr;
+    target_rt_sigframe *frame;
+    int i;
 
     frame_addr = get_sigframe(ka, env, sizeof(*frame));
     trace_user_setup_rt_frame(env, frame_addr);
@@ -159,47 +102,37 @@ void setup_rt_frame(int sig, struct target_sigaction *ka,
         goto give_sigsegv;
     }
 
-    info_addr = frame_addr + offsetof(struct target_rt_sigframe, info);
-    __put_user(info_addr, &frame->pinfo);
-    uc_addr = frame_addr + offsetof(struct target_rt_sigframe, uc);
-    __put_user(uc_addr, &frame->puc);
-
     if (ka->sa_flags & SA_SIGINFO) {
         tswap_siginfo(&frame->info, info);
     }
 
-    /*err |= __clear_user(&frame->uc, offsetof(ucontext_t, uc_mcontext));*/
     __put_user(0, &frame->uc.tuc_flags);
     __put_user(0, &frame->uc.tuc_link);
-    target_save_altstack(&frame->uc.tuc_stack, env);
-    setup_sigcontext(&frame->sc, env, set->sig[0]);
 
-    /*err |= copy_to_user(frame->uc.tuc_sigmask, set, sizeof(*set));*/
-
-    /* trampoline - the desired return ip is the retcode itself */
-    return_ip = (unsigned long)&frame->retcode;
-    /* This is l.ori r11,r0,__NR_sigreturn, l.sys 1 */
-    __put_user(0xa960, (short *)(frame->retcode + 0));
-    __put_user(TARGET_NR_rt_sigreturn, (short *)(frame->retcode + 2));
-    __put_user(0x20000001, (unsigned long *)(frame->retcode + 4));
-    __put_user(0x15000000, (unsigned long *)(frame->retcode + 8));
-
-    if (err) {
-        goto give_sigsegv;
+    target_save_altstack(&frame->uc.tuc_stack, env);
+    setup_sigcontext(&frame->uc.tuc_mcontext, env);
+    for (i = 0; i < TARGET_NSIG_WORDS; ++i) {
+        __put_user(set->sig[i], &frame->uc.tuc_sigmask.sig[i]);
     }
 
-    /* TODO what is the current->exec_domain stuff and invmap ? */
+    /* This is l.ori r11,r0,__NR_sigreturn; l.sys 1; l.nop; l.nop */
+    __put_user(0xa9600000 | TARGET_NR_rt_sigreturn, frame->retcode + 0);
+    __put_user(0x20000001, frame->retcode + 1);
+    __put_user(0x15000000, frame->retcode + 2);
+    __put_user(0x15000000, frame->retcode + 3);
 
     /* Set up registers for signal handler */
-    env->pc = (unsigned long)ka->_sa_handler; /* what we enter NOW */
-    cpu_set_gpr(env, 9, (unsigned long)return_ip);     /* what we enter LATER */
-    cpu_set_gpr(env, 3, (unsigned long)sig);           /* arg 1: signo */
-    cpu_set_gpr(env, 4, (unsigned long)&frame->info);  /* arg 2: (siginfo_t*) */
-    cpu_set_gpr(env, 5, (unsigned long)&frame->uc);    /* arg 3: ucontext */
-
-    /* actually move the usp to reflect the stacked frame */
-    cpu_set_gpr(env, 1, (unsigned long)frame);
-
+    cpu_set_gpr(env, 9, frame_addr + offsetof(target_rt_sigframe, retcode));
+    cpu_set_gpr(env, 3, sig);
+    cpu_set_gpr(env, 4, frame_addr + offsetof(target_rt_sigframe, info));
+    cpu_set_gpr(env, 5, frame_addr + offsetof(target_rt_sigframe, uc));
+    cpu_set_gpr(env, 1, frame_addr);
+
+    /* For debugging convenience, set ppc to the insn that faulted.  */
+    env->ppc = env->pc;
+    /* When setting the PC for the signal handler, exit delay slot.  */
+    env->pc = ka->_sa_handler;
+    env->dflag = 0;
     return;
 
 give_sigsegv:
@@ -207,16 +140,34 @@ give_sigsegv:
     force_sigsegv(sig);
 }
 
-long do_sigreturn(CPUOpenRISCState *env)
-{
-    trace_user_do_sigreturn(env, 0);
-    fprintf(stderr, "do_sigreturn: not implemented\n");
-    return -TARGET_ENOSYS;
-}
-
 long do_rt_sigreturn(CPUOpenRISCState *env)
 {
+    abi_ulong frame_addr = get_sp_from_cpustate(env);
+    target_rt_sigframe *frame;
+    sigset_t set;
+
     trace_user_do_rt_sigreturn(env, 0);
-    fprintf(stderr, "do_rt_sigreturn: not implemented\n");
-    return -TARGET_ENOSYS;
+    if (!lock_user_struct(VERIFY_READ, frame, frame_addr, 1)) {
+        goto badframe;
+    }
+    if (frame_addr & 3) {
+        goto badframe;
+    }
+
+    target_to_host_sigset(&set, &frame->uc.tuc_sigmask);
+    set_sigmask(&set);
+
+    restore_sigcontext(env, &frame->uc.tuc_mcontext);
+    if (do_sigaltstack(frame_addr + offsetof(target_rt_sigframe, uc.tuc_stack),
+                       0, frame_addr) == -EFAULT) {
+        goto badframe;
+    }
+
+    unlock_user_struct(frame, frame_addr, 0);
+    return cpu_get_gpr(env, 11);
+
+ badframe:
+    unlock_user_struct(frame, frame_addr, 0);
+    force_sig(TARGET_SIGSEGV);
+    return 0;
 }
diff --git a/linux-user/openrisc/target_syscall.h b/linux-user/openrisc/target_syscall.h
index 03104f80af..d586d2a018 100644
--- a/linux-user/openrisc/target_syscall.h
+++ b/linux-user/openrisc/target_syscall.h
@@ -1,27 +1,15 @@
 #ifndef OPENRISC_TARGET_SYSCALL_H
 #define OPENRISC_TARGET_SYSCALL_H
 
+/* Note that in linux/arch/openrisc/include/uapi/asm/ptrace.h,
+ * this is called user_regs_struct.  Given that this is what
+ * is used within struct sigcontext we need this definition.
+ * However, elfload.c wants this name.
+ */
 struct target_pt_regs {
-    union {
-        struct {
-            /* Named registers */
-            uint32_t sr;       /* Stored in place of r0 */
-            target_ulong sp;   /* r1 */
-        };
-        struct {
-            /* Old style */
-            target_ulong offset[2];
-            target_ulong gprs[30];
-        };
-        struct {
-            /* New style */
-            target_ulong gpr[32];
-        };
-    };
-    target_ulong pc;
-    target_ulong orig_gpr11;   /* For restarting system calls */
-    uint32_t syscallno;        /* Syscall number (used by strace) */
-    target_ulong dummy;     /* Cheap alignment fix */
+    abi_ulong gpr[32];
+    abi_ulong pc;
+    abi_ulong sr;
 };
 
 #define UNAME_MACHINE "openrisc"
diff --git a/linux-user/signal.c b/linux-user/signal.c
index be2815b45d..602b631b92 100644
--- a/linux-user/signal.c
+++ b/linux-user/signal.c
@@ -236,7 +236,7 @@ int do_sigprocmask(int how, const sigset_t *set, sigset_t *oldset)
     return 0;
 }
 
-#if !defined(TARGET_OPENRISC) && !defined(TARGET_NIOS2)
+#if !defined(TARGET_NIOS2)
 /* Just set the guest's signal mask to the specified value; the
  * caller is assumed to have called block_signals() already.
  */
diff --git a/target/openrisc/cpu.c b/target/openrisc/cpu.c
index e01ce9ed1c..fb7cb5c507 100644
--- a/target/openrisc/cpu.c
+++ b/target/openrisc/cpu.c
@@ -27,6 +27,7 @@ static void openrisc_cpu_set_pc(CPUState *cs, vaddr value)
     OpenRISCCPU *cpu = OPENRISC_CPU(cs);
 
     cpu->env.pc = value;
+    cpu->env.dflag = 0;
 }
 
 static bool openrisc_cpu_has_work(CPUState *cs)
-- 
2.17.0

  parent reply	other threads:[~2018-07-02 15:11 UTC|newest]

Thread overview: 35+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-02 15:09 [Qemu-devel] [PULL v2 00/25] OpenRISC updates for 3.0 Stafford Horne
2018-07-02 15:09 ` [Qemu-devel] [PULL v2 01/25] target/openrisc: Fix mtspr shadow gprs Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 02/25] target/openrisc: Add print_insn_or1k Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 03/25] target/openrisc: Log interrupts Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 04/25] target/openrisc: Remove DISAS_JUMP & DISAS_TB_JUMP Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 05/25] target/openrisc: Use exit_tb instead of CPU_INTERRUPT_EXITTB Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 06/25] target/openrisc: Fix singlestep_enabled Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 07/25] target/openrisc: Link more translation blocks Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 08/25] target/openrisc: Split out is_user Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 09/25] target/openrisc: Exit the TB after l.mtspr Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 10/25] target/openrisc: Form the spr index from tcg Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 11/25] target/openrisc: Merge tlb allocation into CPUOpenRISCState Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 12/25] target/openrisc: Remove indirect function calls for mmu Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 13/25] target/openrisc: Merge mmu_helper.c into mmu.c Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 14/25] target/openrisc: Reduce tlb to a single dimension Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 15/25] target/openrisc: Fix tlb flushing in mtspr Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 16/25] target/openrisc: Fix cpu_mmu_index Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 17/25] target/openrisc: Use identical sizes for ITLB and DTLB Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 18/25] target/openrisc: Stub out handle_mmu_fault for softmmu Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 19/25] target/openrisc: Increase the TLB size Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 20/25] target/openrisc: Reorg tlb lookup Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 21/25] target/openrisc: Add support in scripts/qemu-binfmt-conf.sh Stafford Horne
2018-07-02 15:10 ` Stafford Horne [this message]
2018-07-03 22:34   ` [Qemu-devel] [PULL v2 22/25] linux-user: Implement signals for openrisc Philippe Mathieu-Daudé
2018-07-03 23:51     ` Stafford Horne
2018-07-04 20:54       ` Richard Henderson
2018-07-06 22:22         ` Eric Blake
2018-07-06 23:02           ` Stafford Horne
2018-07-07  8:10             ` Laurent Vivier
2018-07-07  7:04       ` Alex Bennée
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 23/25] linux-user: Fix struct sigaltstack " Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 24/25] target/openrisc: Fix delay slot exception flag to match spec Stafford Horne
2018-07-02 15:10 ` [Qemu-devel] [PULL v2 25/25] target/openrisc: Fix writes to interrupt mask register Stafford Horne
2018-07-02 15:36 ` [Qemu-devel] [PULL v2 00/25] OpenRISC updates for 3.0 Peter Maydell
2018-07-03 13:53   ` Stafford Horne

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180702151023.24532-23-shorne@gmail.com \
    --to=shorne@gmail.com \
    --cc=laurent@vivier.eu \
    --cc=peter.maydell@linaro.org \
    --cc=qemu-devel@nongnu.org \
    --cc=richard.henderson@linaro.org \
    --cc=riku.voipio@iki.fi \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.