From: Saravanan Sekar <sravanhome@gmail.com> To: afaerber@suse.de, manivannan.sadhasivam@linaro.org, sboyd@kernel.org Cc: mark.rutland@arm.com, devicetree@vger.kernel.org, linux@cubietech.com, sravanhome@gmail.com, support@cubietech.com, catalin.marinas@arm.com, mturquette@baylibre.com, will.deacon@arm.com, linux-kernel@vger.kernel.org, thomas.liau@actions-semi.com, darren@cubietech.com, robh+dt@kernel.org, jeff.chen@actions-semi.com, pn@denx.de, linux-clk@vger.kernel.org, linux-arm-kernel@lists.infradead.org, mp-cs@actions-semi.com Subject: [PATCH v6 2/5] dt-bindings: clock: Add S700 support for Actions Semi Soc's Date: Sun, 15 Jul 2018 22:35:21 +0200 [thread overview] Message-ID: <20180715203524.11948-3-sravanhome@gmail.com> (raw) In-Reply-To: <20180715203524.11948-1-sravanhome@gmail.com> Add clock bindings constants for action S700 Maintain common clock dt-bindings for Actions Semi SoC's S700 and S900. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> --- ...tions,s900-cmu.txt => actions,owl-cmu.txt} | 20 +-- include/dt-bindings/clock/actions,s700-cmu.h | 118 ++++++++++++++++++ 2 files changed, 129 insertions(+), 9 deletions(-) rename Documentation/devicetree/bindings/clock/{actions,s900-cmu.txt => actions,owl-cmu.txt} (68%) create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h diff --git a/Documentation/devicetree/bindings/clock/actions,s900-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt similarity index 68% rename from Documentation/devicetree/bindings/clock/actions,s900-cmu.txt rename to Documentation/devicetree/bindings/clock/actions,owl-cmu.txt index 93e4fb827cd6..d1e60d297387 100644 --- a/Documentation/devicetree/bindings/clock/actions,s900-cmu.txt +++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt @@ -1,12 +1,14 @@ -* Actions S900 Clock Management Unit (CMU) +* Actions Semi Owl Clock Management Unit (CMU) -The Actions S900 clock management unit generates and supplies clock to various -controllers within the SoC. The clock binding described here is applicable to -S900 SoC. +The Actions Semi Owl Clock Management Unit generates and supplies clock +to various controllers within the SoC. The clock binding described here is +applicable to S900 and S700 SoC's. Required Properties: -- compatible: should be "actions,s900-cmu" +- compatible: should be one of the following, + "actions,s900-cmu" + "actions,s700-cmu" - reg: physical base address of the controller and length of memory mapped region. - clocks: Reference to the parent clocks ("hosc", "losc") @@ -15,16 +17,16 @@ Required Properties: Each clock is assigned an identifier, and client nodes can use this identifier to specify the clock which they consume. -All available clocks are defined as preprocessor macros in -dt-bindings/clock/actions,s900-cmu.h header and can be used in device -tree sources. +All available clocks are defined as preprocessor macros in corresponding +dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be +used in device tree sources. External clocks: The hosc clock used as input for the plls is generated outside the SoC. It is expected that it is defined using standard clock bindings as "hosc". -Actions S900 CMU also requires one more clock: +Actions Semi S900 CMU also requires one more clock: - "losc" - internal low frequency oscillator Example: Clock Management Unit node: diff --git a/include/dt-bindings/clock/actions,s700-cmu.h b/include/dt-bindings/clock/actions,s700-cmu.h new file mode 100644 index 000000000000..3e1942996724 --- /dev/null +++ b/include/dt-bindings/clock/actions,s700-cmu.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Device Tree binding constants for Actions Semi S700 Clock Management Unit + * + * Copyright (c) 2014 Actions Semi Inc. + * Author: David Liu <liuwei@actions-semi.com> + * + * Author: Pathiban Nallathambi <pn@denx.de> + * Author: Saravanan Sekar <sravanhome@gmail.com> + */ + +#ifndef __DT_BINDINGS_CLOCK_S700_H +#define __DT_BINDINGS_CLOCK_S700_H + +#define CLK_NONE 0 + +/* pll clocks */ +#define CLK_CORE_PLL 1 +#define CLK_DEV_PLL 2 +#define CLK_DDR_PLL 3 +#define CLK_NAND_PLL 4 +#define CLK_DISPLAY_PLL 5 +#define CLK_TVOUT_PLL 6 +#define CLK_CVBS_PLL 7 +#define CLK_AUDIO_PLL 8 +#define CLK_ETHERNET_PLL 9 + +/* system clock */ +#define CLK_CPU 10 +#define CLK_DEV 11 +#define CLK_AHB 12 +#define CLK_APB 13 +#define CLK_DMAC 14 +#define CLK_NOC0_CLK_MUX 15 +#define CLK_NOC1_CLK_MUX 16 +#define CLK_HP_CLK_MUX 17 +#define CLK_HP_CLK_DIV 18 +#define CLK_NOC1_CLK_DIV 19 +#define CLK_NOC0 20 +#define CLK_NOC1 21 +#define CLK_SENOR_SRC 22 + +/* peripheral device clock */ +#define CLK_GPIO 23 +#define CLK_TIMER 24 +#define CLK_DSI 25 +#define CLK_CSI 26 +#define CLK_SI 27 +#define CLK_DE 28 +#define CLK_HDE 29 +#define CLK_VDE 30 +#define CLK_VCE 31 +#define CLK_NAND 32 +#define CLK_SD0 33 +#define CLK_SD1 34 +#define CLK_SD2 35 + +#define CLK_UART0 36 +#define CLK_UART1 37 +#define CLK_UART2 38 +#define CLK_UART3 39 +#define CLK_UART4 40 +#define CLK_UART5 41 +#define CLK_UART6 42 + +#define CLK_PWM0 43 +#define CLK_PWM1 44 +#define CLK_PWM2 45 +#define CLK_PWM3 46 +#define CLK_PWM4 47 +#define CLK_PWM5 48 +#define CLK_GPU3D 49 + +#define CLK_I2C0 50 +#define CLK_I2C1 51 +#define CLK_I2C2 52 +#define CLK_I2C3 53 + +#define CLK_SPI0 54 +#define CLK_SPI1 55 +#define CLK_SPI2 56 +#define CLK_SPI3 57 + +#define CLK_USB3_480MPLL0 58 +#define CLK_USB3_480MPHY0 59 +#define CLK_USB3_5GPHY 60 +#define CLK_USB3_CCE 61 +#define CLK_USB3_MAC 62 + +#define CLK_LCD 63 +#define CLK_HDMI_AUDIO 64 +#define CLK_I2SRX 65 +#define CLK_I2STX 66 + +#define CLK_SENSOR0 67 +#define CLK_SENSOR1 68 + +#define CLK_HDMI_DEV 69 + +#define CLK_ETHERNET 70 +#define CLK_RMII_REF 71 + +#define CLK_USB2H0_PLLEN 72 +#define CLK_USB2H0_PHY 73 +#define CLK_USB2H0_CCE 74 +#define CLK_USB2H1_PLLEN 75 +#define CLK_USB2H1_PHY 76 +#define CLK_USB2H1_CCE 77 + +#define CLK_TVOUT 78 + +#define CLK_THERMAL_SENSOR 79 + +#define CLK_IRC_SWITCH 80 +#define CLK_PCM1 81 +#define CLK_NR_CLKS (CLK_PCM1 + 1) + +#endif /* __DT_BINDINGS_CLOCK_S700_H */ -- 2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: sravanhome@gmail.com (Saravanan Sekar) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH v6 2/5] dt-bindings: clock: Add S700 support for Actions Semi Soc's Date: Sun, 15 Jul 2018 22:35:21 +0200 [thread overview] Message-ID: <20180715203524.11948-3-sravanhome@gmail.com> (raw) In-Reply-To: <20180715203524.11948-1-sravanhome@gmail.com> Add clock bindings constants for action S700 Maintain common clock dt-bindings for Actions Semi SoC's S700 and S900. Signed-off-by: Parthiban Nallathambi <pn@denx.de> Signed-off-by: Saravanan Sekar <sravanhome@gmail.com> --- ...tions,s900-cmu.txt => actions,owl-cmu.txt} | 20 +-- include/dt-bindings/clock/actions,s700-cmu.h | 118 ++++++++++++++++++ 2 files changed, 129 insertions(+), 9 deletions(-) rename Documentation/devicetree/bindings/clock/{actions,s900-cmu.txt => actions,owl-cmu.txt} (68%) create mode 100644 include/dt-bindings/clock/actions,s700-cmu.h diff --git a/Documentation/devicetree/bindings/clock/actions,s900-cmu.txt b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt similarity index 68% rename from Documentation/devicetree/bindings/clock/actions,s900-cmu.txt rename to Documentation/devicetree/bindings/clock/actions,owl-cmu.txt index 93e4fb827cd6..d1e60d297387 100644 --- a/Documentation/devicetree/bindings/clock/actions,s900-cmu.txt +++ b/Documentation/devicetree/bindings/clock/actions,owl-cmu.txt @@ -1,12 +1,14 @@ -* Actions S900 Clock Management Unit (CMU) +* Actions Semi Owl Clock Management Unit (CMU) -The Actions S900 clock management unit generates and supplies clock to various -controllers within the SoC. The clock binding described here is applicable to -S900 SoC. +The Actions Semi Owl Clock Management Unit generates and supplies clock +to various controllers within the SoC. The clock binding described here is +applicable to S900 and S700 SoC's. Required Properties: -- compatible: should be "actions,s900-cmu" +- compatible: should be one of the following, + "actions,s900-cmu" + "actions,s700-cmu" - reg: physical base address of the controller and length of memory mapped region. - clocks: Reference to the parent clocks ("hosc", "losc") @@ -15,16 +17,16 @@ Required Properties: Each clock is assigned an identifier, and client nodes can use this identifier to specify the clock which they consume. -All available clocks are defined as preprocessor macros in -dt-bindings/clock/actions,s900-cmu.h header and can be used in device -tree sources. +All available clocks are defined as preprocessor macros in corresponding +dt-bindings/clock/actions,s900-cmu.h or actions,s700-cmu.h header and can be +used in device tree sources. External clocks: The hosc clock used as input for the plls is generated outside the SoC. It is expected that it is defined using standard clock bindings as "hosc". -Actions S900 CMU also requires one more clock: +Actions Semi S900 CMU also requires one more clock: - "losc" - internal low frequency oscillator Example: Clock Management Unit node: diff --git a/include/dt-bindings/clock/actions,s700-cmu.h b/include/dt-bindings/clock/actions,s700-cmu.h new file mode 100644 index 000000000000..3e1942996724 --- /dev/null +++ b/include/dt-bindings/clock/actions,s700-cmu.h @@ -0,0 +1,118 @@ +/* SPDX-License-Identifier: GPL-2.0 + * + * Device Tree binding constants for Actions Semi S700 Clock Management Unit + * + * Copyright (c) 2014 Actions Semi Inc. + * Author: David Liu <liuwei@actions-semi.com> + * + * Author: Pathiban Nallathambi <pn@denx.de> + * Author: Saravanan Sekar <sravanhome@gmail.com> + */ + +#ifndef __DT_BINDINGS_CLOCK_S700_H +#define __DT_BINDINGS_CLOCK_S700_H + +#define CLK_NONE 0 + +/* pll clocks */ +#define CLK_CORE_PLL 1 +#define CLK_DEV_PLL 2 +#define CLK_DDR_PLL 3 +#define CLK_NAND_PLL 4 +#define CLK_DISPLAY_PLL 5 +#define CLK_TVOUT_PLL 6 +#define CLK_CVBS_PLL 7 +#define CLK_AUDIO_PLL 8 +#define CLK_ETHERNET_PLL 9 + +/* system clock */ +#define CLK_CPU 10 +#define CLK_DEV 11 +#define CLK_AHB 12 +#define CLK_APB 13 +#define CLK_DMAC 14 +#define CLK_NOC0_CLK_MUX 15 +#define CLK_NOC1_CLK_MUX 16 +#define CLK_HP_CLK_MUX 17 +#define CLK_HP_CLK_DIV 18 +#define CLK_NOC1_CLK_DIV 19 +#define CLK_NOC0 20 +#define CLK_NOC1 21 +#define CLK_SENOR_SRC 22 + +/* peripheral device clock */ +#define CLK_GPIO 23 +#define CLK_TIMER 24 +#define CLK_DSI 25 +#define CLK_CSI 26 +#define CLK_SI 27 +#define CLK_DE 28 +#define CLK_HDE 29 +#define CLK_VDE 30 +#define CLK_VCE 31 +#define CLK_NAND 32 +#define CLK_SD0 33 +#define CLK_SD1 34 +#define CLK_SD2 35 + +#define CLK_UART0 36 +#define CLK_UART1 37 +#define CLK_UART2 38 +#define CLK_UART3 39 +#define CLK_UART4 40 +#define CLK_UART5 41 +#define CLK_UART6 42 + +#define CLK_PWM0 43 +#define CLK_PWM1 44 +#define CLK_PWM2 45 +#define CLK_PWM3 46 +#define CLK_PWM4 47 +#define CLK_PWM5 48 +#define CLK_GPU3D 49 + +#define CLK_I2C0 50 +#define CLK_I2C1 51 +#define CLK_I2C2 52 +#define CLK_I2C3 53 + +#define CLK_SPI0 54 +#define CLK_SPI1 55 +#define CLK_SPI2 56 +#define CLK_SPI3 57 + +#define CLK_USB3_480MPLL0 58 +#define CLK_USB3_480MPHY0 59 +#define CLK_USB3_5GPHY 60 +#define CLK_USB3_CCE 61 +#define CLK_USB3_MAC 62 + +#define CLK_LCD 63 +#define CLK_HDMI_AUDIO 64 +#define CLK_I2SRX 65 +#define CLK_I2STX 66 + +#define CLK_SENSOR0 67 +#define CLK_SENSOR1 68 + +#define CLK_HDMI_DEV 69 + +#define CLK_ETHERNET 70 +#define CLK_RMII_REF 71 + +#define CLK_USB2H0_PLLEN 72 +#define CLK_USB2H0_PHY 73 +#define CLK_USB2H0_CCE 74 +#define CLK_USB2H1_PLLEN 75 +#define CLK_USB2H1_PHY 76 +#define CLK_USB2H1_CCE 77 + +#define CLK_TVOUT 78 + +#define CLK_THERMAL_SENSOR 79 + +#define CLK_IRC_SWITCH 80 +#define CLK_PCM1 81 +#define CLK_NR_CLKS (CLK_PCM1 + 1) + +#endif /* __DT_BINDINGS_CLOCK_S700_H */ -- 2.18.0
next prev parent reply other threads:[~2018-07-15 20:35 UTC|newest] Thread overview: 25+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-07-15 20:35 [PATCH v6 0/5] Add clock driver for Actions S700 SoC Saravanan Sekar 2018-07-15 20:35 ` Saravanan Sekar 2018-07-15 20:35 ` [PATCH v6 1/5] clk: actions: Add missing REGMAP_MMIO dependency Saravanan Sekar 2018-07-15 20:35 ` Saravanan Sekar 2018-07-15 21:39 ` Andreas Färber 2018-07-15 21:39 ` Andreas Färber 2018-07-15 21:39 ` Andreas Färber 2018-07-17 14:15 ` Manivannan Sadhasivam 2018-07-17 14:15 ` Manivannan Sadhasivam 2018-07-15 20:35 ` Saravanan Sekar [this message] 2018-07-15 20:35 ` [PATCH v6 2/5] dt-bindings: clock: Add S700 support for Actions Semi Soc's Saravanan Sekar 2018-07-16 15:20 ` Rob Herring 2018-07-16 15:20 ` Rob Herring 2018-07-15 20:35 ` [PATCH v6 3/5] clk: actions: Add S700 SoC clock support Saravanan Sekar 2018-07-15 20:35 ` Saravanan Sekar 2018-07-17 14:10 ` Manivannan Sadhasivam 2018-07-17 14:10 ` Manivannan Sadhasivam 2018-07-15 20:35 ` [PATCH v6 4/5] arm64: dts: actions: Add Clock Management Unit for S700 Saravanan Sekar 2018-07-15 20:35 ` Saravanan Sekar 2018-07-17 14:14 ` Manivannan Sadhasivam 2018-07-17 14:14 ` Manivannan Sadhasivam 2018-07-15 20:35 ` [PATCH v6 5/5] arm64: dts: actions: Set UART clock reference from CMU Saravanan Sekar 2018-07-15 20:35 ` Saravanan Sekar 2018-07-17 14:17 ` Manivannan Sadhasivam 2018-07-17 14:17 ` Manivannan Sadhasivam
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180715203524.11948-3-sravanhome@gmail.com \ --to=sravanhome@gmail.com \ --cc=afaerber@suse.de \ --cc=catalin.marinas@arm.com \ --cc=darren@cubietech.com \ --cc=devicetree@vger.kernel.org \ --cc=jeff.chen@actions-semi.com \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-clk@vger.kernel.org \ --cc=linux-kernel@vger.kernel.org \ --cc=linux@cubietech.com \ --cc=manivannan.sadhasivam@linaro.org \ --cc=mark.rutland@arm.com \ --cc=mp-cs@actions-semi.com \ --cc=mturquette@baylibre.com \ --cc=pn@denx.de \ --cc=robh+dt@kernel.org \ --cc=sboyd@kernel.org \ --cc=support@cubietech.com \ --cc=thomas.liau@actions-semi.com \ --cc=will.deacon@arm.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.