All of lore.kernel.org
 help / color / mirror / Atom feed
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Shreeya Patel <shreeya.patel23498@gmail.com>,
	Arvind Yadav <arvind.yadav.cs@gmail.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	Krzysztof Halasa <khalasa@piap.pl>, Arnd Bergmann <arnd@arndb.de>,
	linux-arm-kernel@lists.infradead.org,
	linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
	dri-devel@lists.freedesktop.org,
	Andy Shevchenko <andy.shevchenko@gmail.com>,
	Tomi Valkeinen <tomi.valkeinen@ti.com>,
	Janusz Krzysztofik <jmkrzyszt@gmail.com>
Subject: [PATCH v2 2/3 v4] mtd: rawnand: ams-delta: use GPIO lookup table
Date: Wed, 18 Jul 2018 01:14:47 +0200	[thread overview]
Message-ID: <20180717231448.14958-3-jmkrzyszt@gmail.com> (raw)
In-Reply-To: <20180717231448.14958-1-jmkrzyszt@gmail.com>

Now as Amstrad Delta board - the only user of this driver - provides
GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and
use the table to locate required GPIO pins.

Declare static variables for storing GPIO descriptors and replace
gpio_ function calls with their gpiod_ equivalents.

Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changelog:
v2: Fix handling of devm_gpiod_get_optional() return values - thanks to
    Andy Shevchenko
v3: Remove problematic error code conversion, no longer needed if used
    on top of commit d08605a64e67 ("ARM: OMAP1: ams-delta: move late
    devices back to init_machine") already in linux-omap and commit
    8853daf3b4ac ("gpiolib: Defer on non-DT find_chip_by_name()
    failure") already in linux-next - thanks to Boris Brezillon
v4: Fix style issue - thanks to Boris Brezillon

Dependency on commit 8853daf3b4ac ("gpiolib: Defer on non-DT
find_chip_by_name() failure") is not critical for clean build or run, it
only prevents from unexpected future changes to driver initialization
order during device_initall.

 drivers/mtd/nand/raw/ams-delta.c | 126 +++++++++++++++++++++------------------
 1 file changed, 67 insertions(+), 59 deletions(-)

diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 37a3cc21c7bc..2a8872ebd14a 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -20,23 +20,28 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <mach/board-ams-delta.h>
-
 #include <mach/hardware.h>
 
 /*
  * MTD structure for E3 (Delta)
  */
 static struct mtd_info *ams_delta_mtd = NULL;
+static struct gpio_desc *gpiod_rdy;
+static struct gpio_desc *gpiod_nce;
+static struct gpio_desc *gpiod_nre;
+static struct gpio_desc *gpiod_nwp;
+static struct gpio_desc *gpiod_nwe;
+static struct gpio_desc *gpiod_ale;
+static struct gpio_desc *gpiod_cle;
 
 /*
  * Define partitions for flash devices
@@ -70,9 +75,9 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 
 	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
 	writew(byte, this->IO_ADDR_W);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
+	gpiod_set_value(gpiod_nwe, 0);
 	ndelay(40);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
+	gpiod_set_value(gpiod_nwe, 1);
 }
 
 static u_char ams_delta_read_byte(struct mtd_info *mtd)
@@ -81,11 +86,11 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
 	struct nand_chip *this = mtd_to_nand(mtd);
 	void __iomem *io_base = (void __iomem *)nand_get_controller_data(this);
 
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
+	gpiod_set_value(gpiod_nre, 0);
 	ndelay(40);
 	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
 	res = readw(this->IO_ADDR_R);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
+	gpiod_set_value(gpiod_nre, 1);
 
 	return res;
 }
@@ -120,12 +125,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 {
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
-				(ctrl & NAND_NCE) == 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
-				(ctrl & NAND_CLE) != 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
-				(ctrl & NAND_ALE) != 0);
+		gpiod_set_value(gpiod_nce, !(ctrl & NAND_NCE));
+		gpiod_set_value(gpiod_cle, !!(ctrl & NAND_CLE));
+		gpiod_set_value(gpiod_ale, !!(ctrl & NAND_ALE));
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -134,41 +136,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 
 static int ams_delta_nand_ready(struct mtd_info *mtd)
 {
-	return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
+	return gpiod_get_value(gpiod_rdy);
 }
 
-static const struct gpio _mandatory_gpio[] = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NCE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nce",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NRE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nre",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWP,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwp",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwe",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_ALE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_ale",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_CLE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_cle",
-	},
-};
 
 /*
  * Main initialization routine
@@ -216,12 +186,17 @@ static int ams_delta_init(struct platform_device *pdev)
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
 	this->cmd_ctrl = ams_delta_hwcontrol;
-	if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
-		this->dev_ready = ams_delta_nand_ready;
-	} else {
-		this->dev_ready = NULL;
-		pr_notice("Couldn't request gpio for Delta NAND ready.\n");
+
+	gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
+	if (IS_ERR(gpiod_rdy)) {
+		err = PTR_ERR(gpiod_rdy);
+		dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
+		goto out_mtd;
 	}
+
+	if (gpiod_rdy)
+		this->dev_ready = ams_delta_nand_ready;
+
 	/* 25 us command delay time */
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
@@ -230,9 +205,47 @@ static int ams_delta_init(struct platform_device *pdev)
 	platform_set_drvdata(pdev, io_base);
 
 	/* Set chip enabled, but  */
-	err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	if (err)
-		goto out_gpio;
+	gpiod_nwp = devm_gpiod_get(&pdev->dev, "nwp", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwp)) {
+		err = PTR_ERR(gpiod_nwp);
+		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nce)) {
+		err = PTR_ERR(gpiod_nce);
+		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nre)) {
+		err = PTR_ERR(gpiod_nre);
+		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwe)) {
+		err = PTR_ERR(gpiod_nwe);
+		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_ale)) {
+		err = PTR_ERR(gpiod_ale);
+		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_cle)) {
+		err = PTR_ERR(gpiod_cle);
+		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
 
 	/* Scan to find existence of the device */
 	err = nand_scan(ams_delta_mtd, 1);
@@ -246,9 +259,6 @@ static int ams_delta_init(struct platform_device *pdev)
 	goto out;
 
  out_mtd:
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-out_gpio:
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 out_free:
 	kfree(this);
@@ -266,8 +276,6 @@ static int ams_delta_cleanup(struct platform_device *pdev)
 	/* Release resources, unregister device */
 	nand_release(ams_delta_mtd);
 
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 
 	/* Free the MTD device structure */
-- 
2.16.4


WARNING: multiple messages have this Message-ID (diff)
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Shreeya Patel <shreeya.patel23498@gmail.com>,
	Arvind Yadav <arvind.yadav.cs@gmail.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	Krzysztof Halasa <khalasa@piap.pl>, Arnd Bergmann <arnd@arndb.de>,
	linux-arm-kernel@lists.infradead.org,
	linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
	dri-devel@lists.freedesktop.org, Andy Shevchenko <andy.shevchen>
Subject: [PATCH v2 2/3 v4] mtd: rawnand: ams-delta: use GPIO lookup table
Date: Tue, 17 Jul 2018 23:14:47 +0000	[thread overview]
Message-ID: <20180717231448.14958-3-jmkrzyszt@gmail.com> (raw)
In-Reply-To: <20180717231448.14958-1-jmkrzyszt@gmail.com>

Now as Amstrad Delta board - the only user of this driver - provides
GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and
use the table to locate required GPIO pins.

Declare static variables for storing GPIO descriptors and replace
gpio_ function calls with their gpiod_ equivalents.

Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changelog:
v2: Fix handling of devm_gpiod_get_optional() return values - thanks to
    Andy Shevchenko
v3: Remove problematic error code conversion, no longer needed if used
    on top of commit d08605a64e67 ("ARM: OMAP1: ams-delta: move late
    devices back to init_machine") already in linux-omap and commit
    8853daf3b4ac ("gpiolib: Defer on non-DT find_chip_by_name()
    failure") already in linux-next - thanks to Boris Brezillon
v4: Fix style issue - thanks to Boris Brezillon

Dependency on commit 8853daf3b4ac ("gpiolib: Defer on non-DT
find_chip_by_name() failure") is not critical for clean build or run, it
only prevents from unexpected future changes to driver initialization
order during device_initall.

 drivers/mtd/nand/raw/ams-delta.c | 126 +++++++++++++++++++++------------------
 1 file changed, 67 insertions(+), 59 deletions(-)

diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 37a3cc21c7bc..2a8872ebd14a 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -20,23 +20,28 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <mach/board-ams-delta.h>
-
 #include <mach/hardware.h>
 
 /*
  * MTD structure for E3 (Delta)
  */
 static struct mtd_info *ams_delta_mtd = NULL;
+static struct gpio_desc *gpiod_rdy;
+static struct gpio_desc *gpiod_nce;
+static struct gpio_desc *gpiod_nre;
+static struct gpio_desc *gpiod_nwp;
+static struct gpio_desc *gpiod_nwe;
+static struct gpio_desc *gpiod_ale;
+static struct gpio_desc *gpiod_cle;
 
 /*
  * Define partitions for flash devices
@@ -70,9 +75,9 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 
 	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
 	writew(byte, this->IO_ADDR_W);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
+	gpiod_set_value(gpiod_nwe, 0);
 	ndelay(40);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
+	gpiod_set_value(gpiod_nwe, 1);
 }
 
 static u_char ams_delta_read_byte(struct mtd_info *mtd)
@@ -81,11 +86,11 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
 	struct nand_chip *this = mtd_to_nand(mtd);
 	void __iomem *io_base = (void __iomem *)nand_get_controller_data(this);
 
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
+	gpiod_set_value(gpiod_nre, 0);
 	ndelay(40);
 	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
 	res = readw(this->IO_ADDR_R);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
+	gpiod_set_value(gpiod_nre, 1);
 
 	return res;
 }
@@ -120,12 +125,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 {
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
-				(ctrl & NAND_NCE) = 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
-				(ctrl & NAND_CLE) != 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
-				(ctrl & NAND_ALE) != 0);
+		gpiod_set_value(gpiod_nce, !(ctrl & NAND_NCE));
+		gpiod_set_value(gpiod_cle, !!(ctrl & NAND_CLE));
+		gpiod_set_value(gpiod_ale, !!(ctrl & NAND_ALE));
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -134,41 +136,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 
 static int ams_delta_nand_ready(struct mtd_info *mtd)
 {
-	return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
+	return gpiod_get_value(gpiod_rdy);
 }
 
-static const struct gpio _mandatory_gpio[] = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NCE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nce",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NRE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nre",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWP,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwp",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwe",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_ALE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_ale",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_CLE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_cle",
-	},
-};
 
 /*
  * Main initialization routine
@@ -216,12 +186,17 @@ static int ams_delta_init(struct platform_device *pdev)
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
 	this->cmd_ctrl = ams_delta_hwcontrol;
-	if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") = 0) {
-		this->dev_ready = ams_delta_nand_ready;
-	} else {
-		this->dev_ready = NULL;
-		pr_notice("Couldn't request gpio for Delta NAND ready.\n");
+
+	gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
+	if (IS_ERR(gpiod_rdy)) {
+		err = PTR_ERR(gpiod_rdy);
+		dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
+		goto out_mtd;
 	}
+
+	if (gpiod_rdy)
+		this->dev_ready = ams_delta_nand_ready;
+
 	/* 25 us command delay time */
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
@@ -230,9 +205,47 @@ static int ams_delta_init(struct platform_device *pdev)
 	platform_set_drvdata(pdev, io_base);
 
 	/* Set chip enabled, but  */
-	err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	if (err)
-		goto out_gpio;
+	gpiod_nwp = devm_gpiod_get(&pdev->dev, "nwp", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwp)) {
+		err = PTR_ERR(gpiod_nwp);
+		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nce)) {
+		err = PTR_ERR(gpiod_nce);
+		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nre)) {
+		err = PTR_ERR(gpiod_nre);
+		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwe)) {
+		err = PTR_ERR(gpiod_nwe);
+		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_ale)) {
+		err = PTR_ERR(gpiod_ale);
+		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_cle)) {
+		err = PTR_ERR(gpiod_cle);
+		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
 
 	/* Scan to find existence of the device */
 	err = nand_scan(ams_delta_mtd, 1);
@@ -246,9 +259,6 @@ static int ams_delta_init(struct platform_device *pdev)
 	goto out;
 
  out_mtd:
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-out_gpio:
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 out_free:
 	kfree(this);
@@ -266,8 +276,6 @@ static int ams_delta_cleanup(struct platform_device *pdev)
 	/* Release resources, unregister device */
 	nand_release(ams_delta_mtd);
 
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 
 	/* Free the MTD device structure */
-- 
2.16.4


WARNING: multiple messages have this Message-ID (diff)
From: Janusz Krzysztofik <jmkrzyszt@gmail.com>
To: Tony Lindgren <tony@atomide.com>
Cc: Aaro Koskinen <aaro.koskinen@iki.fi>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Shreeya Patel <shreeya.patel23498@gmail.com>,
	Arvind Yadav <arvind.yadav.cs@gmail.com>,
	Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com>,
	Gregory CLEMENT <gregory.clement@bootlin.com>,
	Krzysztof Halasa <khalasa@piap.pl>, Arnd Bergmann <arnd@arndb.de>,
	linux-arm-kernel@lists.infradead.org,
	linux-mtd@lists.infradead.org, linux-omap@vger.kernel.org,
	linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org,
	dri-devel@lists.freedesktop.org, Andy Shevchenko <andy.shevchen>
Subject: [PATCH v2 2/3 v4] mtd: rawnand: ams-delta: use GPIO lookup table
Date: Wed, 18 Jul 2018 01:14:47 +0200	[thread overview]
Message-ID: <20180717231448.14958-3-jmkrzyszt@gmail.com> (raw)
In-Reply-To: <20180717231448.14958-1-jmkrzyszt@gmail.com>

Now as Amstrad Delta board - the only user of this driver - provides
GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and
use the table to locate required GPIO pins.

Declare static variables for storing GPIO descriptors and replace
gpio_ function calls with their gpiod_ equivalents.

Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changelog:
v2: Fix handling of devm_gpiod_get_optional() return values - thanks to
    Andy Shevchenko
v3: Remove problematic error code conversion, no longer needed if used
    on top of commit d08605a64e67 ("ARM: OMAP1: ams-delta: move late
    devices back to init_machine") already in linux-omap and commit
    8853daf3b4ac ("gpiolib: Defer on non-DT find_chip_by_name()
    failure") already in linux-next - thanks to Boris Brezillon
v4: Fix style issue - thanks to Boris Brezillon

Dependency on commit 8853daf3b4ac ("gpiolib: Defer on non-DT
find_chip_by_name() failure") is not critical for clean build or run, it
only prevents from unexpected future changes to driver initialization
order during device_initall.

 drivers/mtd/nand/raw/ams-delta.c | 126 +++++++++++++++++++++------------------
 1 file changed, 67 insertions(+), 59 deletions(-)

diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 37a3cc21c7bc..2a8872ebd14a 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -20,23 +20,28 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <mach/board-ams-delta.h>
-
 #include <mach/hardware.h>
 
 /*
  * MTD structure for E3 (Delta)
  */
 static struct mtd_info *ams_delta_mtd = NULL;
+static struct gpio_desc *gpiod_rdy;
+static struct gpio_desc *gpiod_nce;
+static struct gpio_desc *gpiod_nre;
+static struct gpio_desc *gpiod_nwp;
+static struct gpio_desc *gpiod_nwe;
+static struct gpio_desc *gpiod_ale;
+static struct gpio_desc *gpiod_cle;
 
 /*
  * Define partitions for flash devices
@@ -70,9 +75,9 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 
 	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
 	writew(byte, this->IO_ADDR_W);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
+	gpiod_set_value(gpiod_nwe, 0);
 	ndelay(40);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
+	gpiod_set_value(gpiod_nwe, 1);
 }
 
 static u_char ams_delta_read_byte(struct mtd_info *mtd)
@@ -81,11 +86,11 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
 	struct nand_chip *this = mtd_to_nand(mtd);
 	void __iomem *io_base = (void __iomem *)nand_get_controller_data(this);
 
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
+	gpiod_set_value(gpiod_nre, 0);
 	ndelay(40);
 	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
 	res = readw(this->IO_ADDR_R);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
+	gpiod_set_value(gpiod_nre, 1);
 
 	return res;
 }
@@ -120,12 +125,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 {
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
-				(ctrl & NAND_NCE) == 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
-				(ctrl & NAND_CLE) != 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
-				(ctrl & NAND_ALE) != 0);
+		gpiod_set_value(gpiod_nce, !(ctrl & NAND_NCE));
+		gpiod_set_value(gpiod_cle, !!(ctrl & NAND_CLE));
+		gpiod_set_value(gpiod_ale, !!(ctrl & NAND_ALE));
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -134,41 +136,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 
 static int ams_delta_nand_ready(struct mtd_info *mtd)
 {
-	return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
+	return gpiod_get_value(gpiod_rdy);
 }
 
-static const struct gpio _mandatory_gpio[] = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NCE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nce",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NRE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nre",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWP,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwp",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwe",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_ALE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_ale",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_CLE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_cle",
-	},
-};
 
 /*
  * Main initialization routine
@@ -216,12 +186,17 @@ static int ams_delta_init(struct platform_device *pdev)
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
 	this->cmd_ctrl = ams_delta_hwcontrol;
-	if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
-		this->dev_ready = ams_delta_nand_ready;
-	} else {
-		this->dev_ready = NULL;
-		pr_notice("Couldn't request gpio for Delta NAND ready.\n");
+
+	gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
+	if (IS_ERR(gpiod_rdy)) {
+		err = PTR_ERR(gpiod_rdy);
+		dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
+		goto out_mtd;
 	}
+
+	if (gpiod_rdy)
+		this->dev_ready = ams_delta_nand_ready;
+
 	/* 25 us command delay time */
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
@@ -230,9 +205,47 @@ static int ams_delta_init(struct platform_device *pdev)
 	platform_set_drvdata(pdev, io_base);
 
 	/* Set chip enabled, but  */
-	err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	if (err)
-		goto out_gpio;
+	gpiod_nwp = devm_gpiod_get(&pdev->dev, "nwp", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwp)) {
+		err = PTR_ERR(gpiod_nwp);
+		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nce)) {
+		err = PTR_ERR(gpiod_nce);
+		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nre)) {
+		err = PTR_ERR(gpiod_nre);
+		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwe)) {
+		err = PTR_ERR(gpiod_nwe);
+		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_ale)) {
+		err = PTR_ERR(gpiod_ale);
+		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_cle)) {
+		err = PTR_ERR(gpiod_cle);
+		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
 
 	/* Scan to find existence of the device */
 	err = nand_scan(ams_delta_mtd, 1);
@@ -246,9 +259,6 @@ static int ams_delta_init(struct platform_device *pdev)
 	goto out;
 
  out_mtd:
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-out_gpio:
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 out_free:
 	kfree(this);
@@ -266,8 +276,6 @@ static int ams_delta_cleanup(struct platform_device *pdev)
 	/* Release resources, unregister device */
 	nand_release(ams_delta_mtd);
 
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 
 	/* Free the MTD device structure */
-- 
2.16.4

WARNING: multiple messages have this Message-ID (diff)
From: jmkrzyszt@gmail.com (Janusz Krzysztofik)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v2 2/3 v4] mtd: rawnand: ams-delta: use GPIO lookup table
Date: Wed, 18 Jul 2018 01:14:47 +0200	[thread overview]
Message-ID: <20180717231448.14958-3-jmkrzyszt@gmail.com> (raw)
In-Reply-To: <20180717231448.14958-1-jmkrzyszt@gmail.com>

Now as Amstrad Delta board - the only user of this driver - provides
GPIO lookup tables, switch from GPIO numbers to GPIO descriptors and
use the table to locate required GPIO pins.

Declare static variables for storing GPIO descriptors and replace
gpio_ function calls with their gpiod_ equivalents.

Pin naming used by the driver should be followed while respective GPIO
lookup table is initialized by a board init code.

Signed-off-by: Janusz Krzysztofik <jmkrzyszt@gmail.com>
Acked-by: Boris Brezillon <boris.brezillon@bootlin.com>
---
Changelog:
v2: Fix handling of devm_gpiod_get_optional() return values - thanks to
    Andy Shevchenko
v3: Remove problematic error code conversion, no longer needed if used
    on top of commit d08605a64e67 ("ARM: OMAP1: ams-delta: move late
    devices back to init_machine") already in linux-omap and commit
    8853daf3b4ac ("gpiolib: Defer on non-DT find_chip_by_name()
    failure") already in linux-next - thanks to Boris Brezillon
v4: Fix style issue - thanks to Boris Brezillon

Dependency on commit 8853daf3b4ac ("gpiolib: Defer on non-DT
find_chip_by_name() failure") is not critical for clean build or run, it
only prevents from unexpected future changes to driver initialization
order during device_initall.

 drivers/mtd/nand/raw/ams-delta.c | 126 +++++++++++++++++++++------------------
 1 file changed, 67 insertions(+), 59 deletions(-)

diff --git a/drivers/mtd/nand/raw/ams-delta.c b/drivers/mtd/nand/raw/ams-delta.c
index 37a3cc21c7bc..2a8872ebd14a 100644
--- a/drivers/mtd/nand/raw/ams-delta.c
+++ b/drivers/mtd/nand/raw/ams-delta.c
@@ -20,23 +20,28 @@
 #include <linux/slab.h>
 #include <linux/module.h>
 #include <linux/delay.h>
+#include <linux/gpio/consumer.h>
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/rawnand.h>
 #include <linux/mtd/partitions.h>
-#include <linux/gpio.h>
 #include <linux/platform_data/gpio-omap.h>
 
 #include <asm/io.h>
 #include <asm/sizes.h>
 
-#include <mach/board-ams-delta.h>
-
 #include <mach/hardware.h>
 
 /*
  * MTD structure for E3 (Delta)
  */
 static struct mtd_info *ams_delta_mtd = NULL;
+static struct gpio_desc *gpiod_rdy;
+static struct gpio_desc *gpiod_nce;
+static struct gpio_desc *gpiod_nre;
+static struct gpio_desc *gpiod_nwp;
+static struct gpio_desc *gpiod_nwe;
+static struct gpio_desc *gpiod_ale;
+static struct gpio_desc *gpiod_cle;
 
 /*
  * Define partitions for flash devices
@@ -70,9 +75,9 @@ static void ams_delta_write_byte(struct mtd_info *mtd, u_char byte)
 
 	writew(0, io_base + OMAP_MPUIO_IO_CNTL);
 	writew(byte, this->IO_ADDR_W);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 0);
+	gpiod_set_value(gpiod_nwe, 0);
 	ndelay(40);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NWE, 1);
+	gpiod_set_value(gpiod_nwe, 1);
 }
 
 static u_char ams_delta_read_byte(struct mtd_info *mtd)
@@ -81,11 +86,11 @@ static u_char ams_delta_read_byte(struct mtd_info *mtd)
 	struct nand_chip *this = mtd_to_nand(mtd);
 	void __iomem *io_base = (void __iomem *)nand_get_controller_data(this);
 
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 0);
+	gpiod_set_value(gpiod_nre, 0);
 	ndelay(40);
 	writew(~0, io_base + OMAP_MPUIO_IO_CNTL);
 	res = readw(this->IO_ADDR_R);
-	gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NRE, 1);
+	gpiod_set_value(gpiod_nre, 1);
 
 	return res;
 }
@@ -120,12 +125,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 {
 
 	if (ctrl & NAND_CTRL_CHANGE) {
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_NCE,
-				(ctrl & NAND_NCE) == 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_CLE,
-				(ctrl & NAND_CLE) != 0);
-		gpio_set_value(AMS_DELTA_GPIO_PIN_NAND_ALE,
-				(ctrl & NAND_ALE) != 0);
+		gpiod_set_value(gpiod_nce, !(ctrl & NAND_NCE));
+		gpiod_set_value(gpiod_cle, !!(ctrl & NAND_CLE));
+		gpiod_set_value(gpiod_ale, !!(ctrl & NAND_ALE));
 	}
 
 	if (cmd != NAND_CMD_NONE)
@@ -134,41 +136,9 @@ static void ams_delta_hwcontrol(struct mtd_info *mtd, int cmd,
 
 static int ams_delta_nand_ready(struct mtd_info *mtd)
 {
-	return gpio_get_value(AMS_DELTA_GPIO_PIN_NAND_RB);
+	return gpiod_get_value(gpiod_rdy);
 }
 
-static const struct gpio _mandatory_gpio[] = {
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NCE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nce",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NRE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nre",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWP,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwp",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_NWE,
-		.flags	= GPIOF_OUT_INIT_HIGH,
-		.label	= "nand_nwe",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_ALE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_ale",
-	},
-	{
-		.gpio	= AMS_DELTA_GPIO_PIN_NAND_CLE,
-		.flags	= GPIOF_OUT_INIT_LOW,
-		.label	= "nand_cle",
-	},
-};
 
 /*
  * Main initialization routine
@@ -216,12 +186,17 @@ static int ams_delta_init(struct platform_device *pdev)
 	this->write_buf = ams_delta_write_buf;
 	this->read_buf = ams_delta_read_buf;
 	this->cmd_ctrl = ams_delta_hwcontrol;
-	if (gpio_request(AMS_DELTA_GPIO_PIN_NAND_RB, "nand_rdy") == 0) {
-		this->dev_ready = ams_delta_nand_ready;
-	} else {
-		this->dev_ready = NULL;
-		pr_notice("Couldn't request gpio for Delta NAND ready.\n");
+
+	gpiod_rdy = devm_gpiod_get_optional(&pdev->dev, "rdy", GPIOD_IN);
+	if (IS_ERR(gpiod_rdy)) {
+		err = PTR_ERR(gpiod_rdy);
+		dev_warn(&pdev->dev, "RDY GPIO request failed (%d)\n", err);
+		goto out_mtd;
 	}
+
+	if (gpiod_rdy)
+		this->dev_ready = ams_delta_nand_ready;
+
 	/* 25 us command delay time */
 	this->chip_delay = 30;
 	this->ecc.mode = NAND_ECC_SOFT;
@@ -230,9 +205,47 @@ static int ams_delta_init(struct platform_device *pdev)
 	platform_set_drvdata(pdev, io_base);
 
 	/* Set chip enabled, but  */
-	err = gpio_request_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	if (err)
-		goto out_gpio;
+	gpiod_nwp = devm_gpiod_get(&pdev->dev, "nwp", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwp)) {
+		err = PTR_ERR(gpiod_nwp);
+		dev_err(&pdev->dev, "NWP GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nce = devm_gpiod_get(&pdev->dev, "nce", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nce)) {
+		err = PTR_ERR(gpiod_nce);
+		dev_err(&pdev->dev, "NCE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nre = devm_gpiod_get(&pdev->dev, "nre", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nre)) {
+		err = PTR_ERR(gpiod_nre);
+		dev_err(&pdev->dev, "NRE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_nwe = devm_gpiod_get(&pdev->dev, "nwe", GPIOD_OUT_HIGH);
+	if (IS_ERR(gpiod_nwe)) {
+		err = PTR_ERR(gpiod_nwe);
+		dev_err(&pdev->dev, "NWE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_ale = devm_gpiod_get(&pdev->dev, "ale", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_ale)) {
+		err = PTR_ERR(gpiod_ale);
+		dev_err(&pdev->dev, "ALE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
+
+	gpiod_cle = devm_gpiod_get(&pdev->dev, "cle", GPIOD_OUT_LOW);
+	if (IS_ERR(gpiod_cle)) {
+		err = PTR_ERR(gpiod_cle);
+		dev_err(&pdev->dev, "CLE GPIO request failed (%d)\n", err);
+		goto out_mtd;
+	}
 
 	/* Scan to find existence of the device */
 	err = nand_scan(ams_delta_mtd, 1);
@@ -246,9 +259,6 @@ static int ams_delta_init(struct platform_device *pdev)
 	goto out;
 
  out_mtd:
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-out_gpio:
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 out_free:
 	kfree(this);
@@ -266,8 +276,6 @@ static int ams_delta_cleanup(struct platform_device *pdev)
 	/* Release resources, unregister device */
 	nand_release(ams_delta_mtd);
 
-	gpio_free_array(_mandatory_gpio, ARRAY_SIZE(_mandatory_gpio));
-	gpio_free(AMS_DELTA_GPIO_PIN_NAND_RB);
 	iounmap(io_base);
 
 	/* Free the MTD device structure */
-- 
2.16.4

  parent reply	other threads:[~2018-07-17 23:15 UTC|newest]

Thread overview: 167+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-05-18 21:09 [PATCH 1/6] ARM: OMAP1: ams-delta: add GPIO lookup tables Janusz Krzysztofik
2018-05-18 21:09 ` Janusz Krzysztofik
2018-05-18 21:09 ` Janusz Krzysztofik
2018-05-18 21:09 ` [PATCH 2/6] Input: ams_delta_serio: use GPIO lookup table Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-20 20:17   ` Dmitry Torokhov
2018-05-20 20:17     ` Dmitry Torokhov
2018-05-20 20:17     ` Dmitry Torokhov
2018-05-20 20:17     ` Dmitry Torokhov
2018-05-18 21:09 ` [PATCH 3/6] ASoC: ams_delta: " Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-21 10:05   ` Mark Brown
2018-05-21 10:05     ` Mark Brown
2018-05-21 10:05     ` Mark Brown
2018-05-23 18:52     ` Tony Lindgren
2018-05-23 18:52       ` Tony Lindgren
2018-05-23 18:52       ` Tony Lindgren
2018-05-24 20:35       ` Janusz Krzysztofik
2018-05-24 20:35         ` Janusz Krzysztofik
2018-05-24 20:35         ` Janusz Krzysztofik
2018-05-24 20:35         ` Janusz Krzysztofik
2018-05-18 21:09 ` [PATCH 4/6] fbdev: omapfb: lcd_ams_delta: " Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-25 22:49   ` [Resend] " Janusz Krzysztofik
2018-05-25 22:49     ` Janusz Krzysztofik
2018-07-09 19:16   ` [PATCH v2] video: " Janusz Krzysztofik
2018-07-09 19:16     ` Janusz Krzysztofik
2018-07-17 16:54     ` [PATCH RESEND " Janusz Krzysztofik
2018-07-17 16:54       ` Janusz Krzysztofik
2018-07-17 21:40       ` Janusz Krzysztofik
2018-07-17 21:40         ` Janusz Krzysztofik
2018-05-18 21:09 ` [PATCH 5/6] mtd: rawnand: ams-delta: " Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-18 21:21   ` Andy Shevchenko
2018-05-18 21:21     ` Andy Shevchenko
2018-05-18 21:21     ` Andy Shevchenko
2018-05-18 23:15     ` Janusz Krzysztofik
2018-05-18 23:15       ` Janusz Krzysztofik
2018-05-18 23:15       ` Janusz Krzysztofik
2018-05-18 23:15       ` Janusz Krzysztofik
2018-05-19 18:00       ` Andy Shevchenko
2018-05-19 18:00         ` Andy Shevchenko
2018-05-19 18:00         ` Andy Shevchenko
2018-05-19 18:00         ` Andy Shevchenko
2018-05-19 21:55         ` Janusz Krzysztofik
2018-05-19 21:55           ` Janusz Krzysztofik
2018-05-19 21:55           ` Janusz Krzysztofik
2018-05-19 21:55           ` Janusz Krzysztofik
2018-05-20 14:44           ` Andy Shevchenko
2018-05-20 14:44             ` Andy Shevchenko
2018-05-20 14:44             ` Andy Shevchenko
2018-05-20 14:44             ` Andy Shevchenko
2018-05-20 15:37             ` Janusz Krzysztofik
2018-05-20 15:37               ` Janusz Krzysztofik
2018-05-20 15:37               ` Janusz Krzysztofik
2018-05-20 15:37               ` Janusz Krzysztofik
2018-05-20 16:17               ` Andy Shevchenko
2018-05-20 16:17                 ` Andy Shevchenko
2018-05-20 16:17                 ` Andy Shevchenko
2018-05-20 16:17                 ` Andy Shevchenko
2018-05-20 17:25                 ` Miquel Raynal
2018-05-20 17:25                   ` Miquel Raynal
2018-05-21  6:44                   ` Andy Shevchenko
2018-05-21  6:44                     ` Andy Shevchenko
2018-05-25 22:20             ` [PATCH 5/6 v2] " Janusz Krzysztofik
2018-05-30  9:05               ` Boris Brezillon
2018-05-30 17:43                 ` Janusz Krzysztofik
2018-05-30 17:52                   ` Boris Brezillon
2018-05-30 20:39                     ` Janusz Krzysztofik
2018-06-04  9:55                       ` Boris Brezillon
2018-06-04 16:48                         ` Janusz Krzysztofik
2018-06-04 23:09                           ` Boris Brezillon
2018-06-04 23:30                             ` Boris Brezillon
2018-07-09 19:38               ` [PATCH v3] " Janusz Krzysztofik
2018-07-17 17:05                 ` [PATCH RESEND " Janusz Krzysztofik
2018-07-17 20:31                   ` Boris Brezillon
2018-07-17 19:37                 ` [PATCH " Boris Brezillon
2018-07-17 20:20                   ` Janusz Krzysztofik
2018-07-17 20:22                     ` Boris Brezillon
2018-05-20 19:27           ` [alsa-devel] [PATCH 5/6] " Ladislav Michl
2018-05-20 19:27             ` Ladislav Michl
2018-05-20 19:27             ` Ladislav Michl
2018-05-20 19:27             ` Ladislav Michl
2018-05-20 20:08             ` Dmitry Torokhov
2018-05-20 20:08               ` Dmitry Torokhov
2018-05-20 20:08               ` Dmitry Torokhov
2018-05-20 20:08               ` Dmitry Torokhov
2018-05-21 20:21               ` Janusz Krzysztofik
2018-05-21 20:21                 ` Janusz Krzysztofik
2018-05-21 20:21                 ` Janusz Krzysztofik
2018-05-21 20:21                 ` Janusz Krzysztofik
2018-05-21 20:57                 ` Dmitry Torokhov
2018-05-21 20:57                   ` Dmitry Torokhov
2018-05-21 20:57                   ` Dmitry Torokhov
2018-05-21 20:57                   ` Dmitry Torokhov
2018-05-18 21:09 ` [PATCH 6/6] ARM: OMAP1: ams-delta: make board header file local to mach-omap1 Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-18 21:09   ` Janusz Krzysztofik
2018-05-21 17:35 ` [PATCH 1/6] ARM: OMAP1: ams-delta: add GPIO lookup tables Tony Lindgren
2018-05-21 17:35   ` Tony Lindgren
2018-05-21 17:35   ` Tony Lindgren
2018-05-21 18:10   ` Janusz Krzysztofik
2018-05-21 18:10     ` Janusz Krzysztofik
2018-05-21 18:10     ` Janusz Krzysztofik
2018-07-17 23:14 ` [PATCH v2 0/3] ARM: OMAP1: ams-delta: Complete driver gpiod migration Janusz Krzysztofik
2018-07-17 23:14   ` Janusz Krzysztofik
2018-07-17 23:14   ` Janusz Krzysztofik
2018-07-17 23:14   ` Janusz Krzysztofik
2018-07-17 23:14   ` [PATCH v2 1/3 v2] video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-17 23:14   ` Janusz Krzysztofik [this message]
2018-07-17 23:14     ` [PATCH v2 2/3 v4] mtd: rawnand: ams-delta: " Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-18  7:20     ` Miquel Raynal
2018-07-18  7:20       ` Miquel Raynal
2018-07-18  7:20       ` Miquel Raynal
2018-07-18  7:20       ` Miquel Raynal
2018-07-19  6:39       ` Tony Lindgren
2018-07-19  6:39         ` Tony Lindgren
2018-07-19  6:39         ` Tony Lindgren
2018-07-19  6:39         ` Tony Lindgren
2018-07-17 23:14   ` [PATCH v2 3/3] ARM: OMAP1: ams-delta: make board header file local to mach-omap1 Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-17 23:14     ` Janusz Krzysztofik
2018-07-18 14:18   ` [PATCH v2 0/3] ARM: OMAP1: ams-delta: Complete driver gpiod migration Gregory CLEMENT
2018-07-18 14:18     ` Gregory CLEMENT
2018-07-18 14:18     ` Gregory CLEMENT
2018-07-18 14:18     ` Gregory CLEMENT
2018-09-09 22:56   ` [PATCH v3 " Janusz Krzysztofik
2018-09-09 22:56     ` Janusz Krzysztofik
2018-09-09 22:56     ` Janusz Krzysztofik
2018-09-09 22:56     ` Janusz Krzysztofik
2018-09-09 22:56     ` [PATCH v3 1/3] video: fbdev: omapfb: lcd_ams_delta: use GPIO lookup table Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-10  7:15       ` Linus Walleij
2018-09-10  7:15         ` Linus Walleij
2018-09-10  7:15         ` Linus Walleij
2018-10-03 13:03       ` [PATCH v4] " Janusz Krzysztofik
2018-10-08 10:50         ` Bartlomiej Zolnierkiewicz
2018-09-09 22:56     ` [PATCH v3 2/3] mtd: rawnand: ams-delta: " Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-19 22:17       ` [PATCH v5] " Janusz Krzysztofik
2018-09-20 15:33         ` Linus Walleij
2018-09-23 11:35         ` Miquel Raynal
2018-09-09 22:56     ` [PATCH v3 3/3] ARM: OMAP1: ams-delta: make board header file local to mach-omap1 Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-09 22:56       ` Janusz Krzysztofik
2018-09-19 18:10     ` [PATCH v3 0/3] ARM: OMAP1: ams-delta: Complete driver gpiod migration Janusz Krzysztofik
2018-09-19 18:10       ` Janusz Krzysztofik
2018-09-19 18:10       ` Janusz Krzysztofik
2018-09-20 20:58       ` Tony Lindgren
2018-09-20 20:58         ` Tony Lindgren
2018-09-20 20:58         ` Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180717231448.14958-3-jmkrzyszt@gmail.com \
    --to=jmkrzyszt@gmail.com \
    --cc=aaro.koskinen@iki.fi \
    --cc=andy.shevchenko@gmail.com \
    --cc=arnd@arndb.de \
    --cc=arvind.yadav.cs@gmail.com \
    --cc=b.zolnierkie@samsung.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dri-devel@lists.freedesktop.org \
    --cc=dwmw2@infradead.org \
    --cc=gregory.clement@bootlin.com \
    --cc=khalasa@piap.pl \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-fbdev@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=marek.vasut@gmail.com \
    --cc=miquel.raynal@bootlin.com \
    --cc=richard@nod.at \
    --cc=shreeya.patel23498@gmail.com \
    --cc=tomi.valkeinen@ti.com \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.