All of lore.kernel.org
 help / color / mirror / Atom feed
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Wenyou Yang <wenyou.yang@microchip.com>,
	Josh Wu <rainyfeeling@outlook.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Han Xu <han.xu@nxp.com>, Harvey Hunt <harveyhuntnexus@gmail.com>,
	Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	Xiaolei Li <xiaolei.li@mediatek.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Maxime Ripard <maxime.ripard@bootlin.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Marc Gonzalez <marc.w.gonzalez@free.fr>,
	Mans Rullgard <mans@mansr.com>, Stefan Agner <stefan@agner.ch>
Cc: linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v3 14/33] mtd: rawnand: mtk: convert driver to nand_scan()
Date: Fri, 20 Jul 2018 01:00:07 +0200	[thread overview]
Message-ID: <20180719230026.8741-15-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180719230026.8741-1-miquel.raynal@bootlin.com>

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/mtk_nand.c | 75 ++++++++++++++++++++++++-----------------
 1 file changed, 44 insertions(+), 31 deletions(-)

diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 7bc6be3f6ec0..4376adc433a6 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1250,13 +1250,54 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
 	return 0;
 }
 
+static int mtk_nfc_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct device *dev = mtd->dev.parent;
+	struct mtk_nfc *nfc = nand_get_controller_data(chip);
+	struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
+	int len;
+	int ret;
+
+	if (chip->options & NAND_BUSWIDTH_16) {
+		dev_err(dev, "16bits buswidth not supported");
+		return -EINVAL;
+	}
+
+	/* store bbt magic in page, cause OOB is not protected */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	ret = mtk_nfc_ecc_init(dev, mtd);
+	if (ret)
+		return ret;
+
+	ret = mtk_nfc_set_spare_per_sector(&mtk_nand->spare_per_sector, mtd);
+	if (ret)
+		return ret;
+
+	mtk_nfc_set_fdm(&mtk_nand->fdm, mtd);
+	mtk_nfc_set_bad_mark_ctl(&mtk_nand->bad_mark, mtd);
+
+	len = mtd->writesize + mtd->oobsize;
+	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
+	if (!nfc->buffer)
+		return  -ENOMEM;
+
+	return 0;
+}
+
+static struct nand_controller_ops mtk_nfc_controller_ops = {
+	.attach_chip = mtk_nfc_attach_chip,
+};
+
 static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 				  struct device_node *np)
 {
 	struct mtk_nfc_nand_chip *chip;
 	struct nand_chip *nand;
 	struct mtd_info *mtd;
-	int nsels, len;
+	int nsels;
 	u32 tmp;
 	int ret;
 	int i;
@@ -1287,6 +1328,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 
 	nand = &chip->nand;
 	nand->controller = &nfc->controller;
+	nand->controller->ops = &mtk_nfc_controller_ops;
 
 	nand_set_flash_node(nand, np);
 	nand_set_controller_data(nand, nfc);
@@ -1324,36 +1366,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 
 	mtk_nfc_hw_init(nfc);
 
-	ret = nand_scan_ident(mtd, nsels, NULL);
-	if (ret)
-		return ret;
-
-	/* store bbt magic in page, cause OOB is not protected */
-	if (nand->bbt_options & NAND_BBT_USE_FLASH)
-		nand->bbt_options |= NAND_BBT_NO_OOB;
-
-	ret = mtk_nfc_ecc_init(dev, mtd);
-	if (ret)
-		return -EINVAL;
-
-	if (nand->options & NAND_BUSWIDTH_16) {
-		dev_err(dev, "16bits buswidth not supported");
-		return -EINVAL;
-	}
-
-	ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
-	if (ret)
-		return ret;
-
-	mtk_nfc_set_fdm(&chip->fdm, mtd);
-	mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd);
-
-	len = mtd->writesize + mtd->oobsize;
-	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
-	if (!nfc->buffer)
-		return  -ENOMEM;
-
-	ret = nand_scan_tail(mtd);
+	ret = nand_scan(mtd, nsels);
 	if (ret)
 		return ret;
 
-- 
2.14.1


WARNING: multiple messages have this Message-ID (diff)
From: Miquel Raynal <miquel.raynal@bootlin.com>
To: Wenyou Yang <wenyou.yang@microchip.com>,
	Josh Wu <rainyfeeling@outlook.com>,
	Tudor Ambarus <Tudor.Ambarus@microchip.com>,
	Boris Brezillon <boris.brezillon@bootlin.com>,
	Miquel Raynal <miquel.raynal@bootlin.com>,
	Richard Weinberger <richard@nod.at>,
	David Woodhouse <dwmw2@infradead.org>,
	Brian Norris <computersforpeace@gmail.com>,
	Marek Vasut <marek.vasut@gmail.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Kamal Dasu <kdasu.kdev@gmail.com>,
	Masahiro Yamada <yamada.masahiro@socionext.com>,
	Han Xu <han.xu@nxp.com>, Harvey Hunt <harveyhuntnexus@gmail.com>,
	Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	Xiaolei Li <xiaolei.li@mediatek.com>, Matthias Brugger <mat>
Cc: linux-mtd@lists.infradead.org,
	linux-arm-kernel@lists.infradead.org,
	linux-kernel@vger.kernel.org,
	bcm-kernel-feedback-list@broadcom.com,
	linux-mediatek@lists.infradead.org
Subject: [PATCH v3 14/33] mtd: rawnand: mtk: convert driver to nand_scan()
Date: Fri, 20 Jul 2018 01:00:07 +0200	[thread overview]
Message-ID: <20180719230026.8741-15-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180719230026.8741-1-miquel.raynal@bootlin.com>

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/mtk_nand.c | 75 ++++++++++++++++++++++++-----------------
 1 file changed, 44 insertions(+), 31 deletions(-)

diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 7bc6be3f6ec0..4376adc433a6 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1250,13 +1250,54 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
 	return 0;
 }
 
+static int mtk_nfc_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct device *dev = mtd->dev.parent;
+	struct mtk_nfc *nfc = nand_get_controller_data(chip);
+	struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
+	int len;
+	int ret;
+
+	if (chip->options & NAND_BUSWIDTH_16) {
+		dev_err(dev, "16bits buswidth not supported");
+		return -EINVAL;
+	}
+
+	/* store bbt magic in page, cause OOB is not protected */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	ret = mtk_nfc_ecc_init(dev, mtd);
+	if (ret)
+		return ret;
+
+	ret = mtk_nfc_set_spare_per_sector(&mtk_nand->spare_per_sector, mtd);
+	if (ret)
+		return ret;
+
+	mtk_nfc_set_fdm(&mtk_nand->fdm, mtd);
+	mtk_nfc_set_bad_mark_ctl(&mtk_nand->bad_mark, mtd);
+
+	len = mtd->writesize + mtd->oobsize;
+	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
+	if (!nfc->buffer)
+		return  -ENOMEM;
+
+	return 0;
+}
+
+static struct nand_controller_ops mtk_nfc_controller_ops = {
+	.attach_chip = mtk_nfc_attach_chip,
+};
+
 static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 				  struct device_node *np)
 {
 	struct mtk_nfc_nand_chip *chip;
 	struct nand_chip *nand;
 	struct mtd_info *mtd;
-	int nsels, len;
+	int nsels;
 	u32 tmp;
 	int ret;
 	int i;
@@ -1287,6 +1328,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 
 	nand = &chip->nand;
 	nand->controller = &nfc->controller;
+	nand->controller->ops = &mtk_nfc_controller_ops;
 
 	nand_set_flash_node(nand, np);
 	nand_set_controller_data(nand, nfc);
@@ -1324,36 +1366,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 
 	mtk_nfc_hw_init(nfc);
 
-	ret = nand_scan_ident(mtd, nsels, NULL);
-	if (ret)
-		return ret;
-
-	/* store bbt magic in page, cause OOB is not protected */
-	if (nand->bbt_options & NAND_BBT_USE_FLASH)
-		nand->bbt_options |= NAND_BBT_NO_OOB;
-
-	ret = mtk_nfc_ecc_init(dev, mtd);
-	if (ret)
-		return -EINVAL;
-
-	if (nand->options & NAND_BUSWIDTH_16) {
-		dev_err(dev, "16bits buswidth not supported");
-		return -EINVAL;
-	}
-
-	ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
-	if (ret)
-		return ret;
-
-	mtk_nfc_set_fdm(&chip->fdm, mtd);
-	mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd);
-
-	len = mtd->writesize + mtd->oobsize;
-	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
-	if (!nfc->buffer)
-		return  -ENOMEM;
-
-	ret = nand_scan_tail(mtd);
+	ret = nand_scan(mtd, nsels);
 	if (ret)
 		return ret;
 
-- 
2.14.1

WARNING: multiple messages have this Message-ID (diff)
From: miquel.raynal@bootlin.com (Miquel Raynal)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH v3 14/33] mtd: rawnand: mtk: convert driver to nand_scan()
Date: Fri, 20 Jul 2018 01:00:07 +0200	[thread overview]
Message-ID: <20180719230026.8741-15-miquel.raynal@bootlin.com> (raw)
In-Reply-To: <20180719230026.8741-1-miquel.raynal@bootlin.com>

Two helpers have been added to the core to make ECC-related
configuration between the detection phase and the final NAND scan. Use
these hooks and convert the driver to just use nand_scan() instead of
both nand_scan_ident() and nand_scan_tail().

Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com>
---
 drivers/mtd/nand/raw/mtk_nand.c | 75 ++++++++++++++++++++++++-----------------
 1 file changed, 44 insertions(+), 31 deletions(-)

diff --git a/drivers/mtd/nand/raw/mtk_nand.c b/drivers/mtd/nand/raw/mtk_nand.c
index 7bc6be3f6ec0..4376adc433a6 100644
--- a/drivers/mtd/nand/raw/mtk_nand.c
+++ b/drivers/mtd/nand/raw/mtk_nand.c
@@ -1250,13 +1250,54 @@ static int mtk_nfc_ecc_init(struct device *dev, struct mtd_info *mtd)
 	return 0;
 }
 
+static int mtk_nfc_attach_chip(struct nand_chip *chip)
+{
+	struct mtd_info *mtd = nand_to_mtd(chip);
+	struct device *dev = mtd->dev.parent;
+	struct mtk_nfc *nfc = nand_get_controller_data(chip);
+	struct mtk_nfc_nand_chip *mtk_nand = to_mtk_nand(chip);
+	int len;
+	int ret;
+
+	if (chip->options & NAND_BUSWIDTH_16) {
+		dev_err(dev, "16bits buswidth not supported");
+		return -EINVAL;
+	}
+
+	/* store bbt magic in page, cause OOB is not protected */
+	if (chip->bbt_options & NAND_BBT_USE_FLASH)
+		chip->bbt_options |= NAND_BBT_NO_OOB;
+
+	ret = mtk_nfc_ecc_init(dev, mtd);
+	if (ret)
+		return ret;
+
+	ret = mtk_nfc_set_spare_per_sector(&mtk_nand->spare_per_sector, mtd);
+	if (ret)
+		return ret;
+
+	mtk_nfc_set_fdm(&mtk_nand->fdm, mtd);
+	mtk_nfc_set_bad_mark_ctl(&mtk_nand->bad_mark, mtd);
+
+	len = mtd->writesize + mtd->oobsize;
+	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
+	if (!nfc->buffer)
+		return  -ENOMEM;
+
+	return 0;
+}
+
+static struct nand_controller_ops mtk_nfc_controller_ops = {
+	.attach_chip = mtk_nfc_attach_chip,
+};
+
 static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 				  struct device_node *np)
 {
 	struct mtk_nfc_nand_chip *chip;
 	struct nand_chip *nand;
 	struct mtd_info *mtd;
-	int nsels, len;
+	int nsels;
 	u32 tmp;
 	int ret;
 	int i;
@@ -1287,6 +1328,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 
 	nand = &chip->nand;
 	nand->controller = &nfc->controller;
+	nand->controller->ops = &mtk_nfc_controller_ops;
 
 	nand_set_flash_node(nand, np);
 	nand_set_controller_data(nand, nfc);
@@ -1324,36 +1366,7 @@ static int mtk_nfc_nand_chip_init(struct device *dev, struct mtk_nfc *nfc,
 
 	mtk_nfc_hw_init(nfc);
 
-	ret = nand_scan_ident(mtd, nsels, NULL);
-	if (ret)
-		return ret;
-
-	/* store bbt magic in page, cause OOB is not protected */
-	if (nand->bbt_options & NAND_BBT_USE_FLASH)
-		nand->bbt_options |= NAND_BBT_NO_OOB;
-
-	ret = mtk_nfc_ecc_init(dev, mtd);
-	if (ret)
-		return -EINVAL;
-
-	if (nand->options & NAND_BUSWIDTH_16) {
-		dev_err(dev, "16bits buswidth not supported");
-		return -EINVAL;
-	}
-
-	ret = mtk_nfc_set_spare_per_sector(&chip->spare_per_sector, mtd);
-	if (ret)
-		return ret;
-
-	mtk_nfc_set_fdm(&chip->fdm, mtd);
-	mtk_nfc_set_bad_mark_ctl(&chip->bad_mark, mtd);
-
-	len = mtd->writesize + mtd->oobsize;
-	nfc->buffer = devm_kzalloc(dev, len, GFP_KERNEL);
-	if (!nfc->buffer)
-		return  -ENOMEM;
-
-	ret = nand_scan_tail(mtd);
+	ret = nand_scan(mtd, nsels);
 	if (ret)
 		return ret;
 
-- 
2.14.1

  parent reply	other threads:[~2018-07-19 23:01 UTC|newest]

Thread overview: 123+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-19 22:59 [PATCH v3 00/33] Allow dynamic allocations during NAND chip identification phase Miquel Raynal
2018-07-19 22:59 ` Miquel Raynal
2018-07-19 22:59 ` Miquel Raynal
2018-07-19 22:59 ` [PATCH v3 01/33] mtd: rawnand: brcmnand: convert driver to nand_scan() Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 23:17   ` Boris Brezillon
2018-07-19 23:17     ` Boris Brezillon
2018-07-19 23:17     ` Boris Brezillon
2018-07-20  7:12     ` Miquel Raynal
2018-07-20  7:12       ` Miquel Raynal
2018-07-20  7:12       ` Miquel Raynal
2018-07-19 22:59 ` [PATCH v3 02/33] mtd: rawnand: cafe: " Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59 ` [PATCH v3 03/33] mtd: rawnand: davinci: " Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59 ` [PATCH v3 04/33] mtd: rawnand: denali: convert " Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59 ` [PATCH v3 05/33] mtd: rawnand: fsl_elbc: convert driver " Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59 ` [PATCH v3 06/33] mtd: rawnand: fsl_ifc: " Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 22:59   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 07/33] mtd: rawnand: fsmc: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 08/33] mtd: rawnand: gpmi: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 09/33] mtd: rawnand: hisi504: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 10/33] mtd: rawnand: jz4780: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 11/33] mtd: rawnand: lpc32xx_mlc: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 12/33] mtd: rawnand: lpc32xx_slc: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 13/33] mtd: rawnand: marvell: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` Miquel Raynal [this message]
2018-07-19 23:00   ` [PATCH v3 14/33] mtd: rawnand: mtk: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 15/33] mtd: rawnand: mxc: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 16/33] mtd: rawnand: nandsim: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 17/33] mtd: rawnand: omap2: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 18/33] mtd: rawnand: s3c2410: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 19/33] mtd: rawnand: sh_flctl: move all NAND chip related setup in one function Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 20/33] mtd: rawnand: sh_flctl: convert driver to nand_scan() Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 21/33] mtd: rawnand: sunxi: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 22/33] mtd: rawnand: tango: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 23/33] mtd: rawnand: txx9ndfmc: rename nand controller internal structure Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 24/33] mtd: rawnand: txx9ndfmc: convert driver to nand_scan() Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 25/33] mtd: rawnand: vf610: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 26/33] mtd: rawnand: atmel: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 27/33] mtd: rawnand: sm_common: convert driver to nand_scan_with_ids() Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 28/33] mtd: rawnand: docg4: convert driver to nand_scan() Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:27   ` Boris Brezillon
2018-07-19 23:27     ` Boris Brezillon
2018-07-19 23:27     ` Boris Brezillon
2018-07-20  7:17     ` Miquel Raynal
2018-07-20  7:17       ` Miquel Raynal
2018-07-20  7:17       ` Miquel Raynal
2018-07-20  7:35       ` Boris Brezillon
2018-07-20  7:35         ` Boris Brezillon
2018-07-20  7:35         ` Boris Brezillon
2018-07-19 23:00 ` [PATCH v3 29/33] mtd: rawnand: qcom: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 30/33] mtd: rawnand: jz4740: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 31/33] mtd: rawnand: tegra: " Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00 ` [PATCH v3 32/33] mtd: rawnand: do not export nand_scan_[ident|tail]() anymore Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:45   ` Boris Brezillon
2018-07-19 23:45     ` Boris Brezillon
2018-07-19 23:45     ` Boris Brezillon
2018-07-19 23:00 ` [PATCH v3 33/33] mtd: rawnand: allocate dynamically ONFI parameters during detection Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:00   ` Miquel Raynal
2018-07-19 23:42   ` Boris Brezillon
2018-07-19 23:42     ` Boris Brezillon
2018-07-19 23:42     ` Boris Brezillon

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180719230026.8741-15-miquel.raynal@bootlin.com \
    --to=miquel.raynal@bootlin.com \
    --cc=Tudor.Ambarus@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=boris.brezillon@bootlin.com \
    --cc=computersforpeace@gmail.com \
    --cc=dwmw2@infradead.org \
    --cc=han.xu@nxp.com \
    --cc=harveyhuntnexus@gmail.com \
    --cc=kdasu.kdev@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-mediatek@lists.infradead.org \
    --cc=linux-mtd@lists.infradead.org \
    --cc=mans@mansr.com \
    --cc=marc.w.gonzalez@free.fr \
    --cc=marek.vasut@gmail.com \
    --cc=matthias.bgg@gmail.com \
    --cc=maxime.ripard@bootlin.com \
    --cc=nicolas.ferre@microchip.com \
    --cc=rainyfeeling@outlook.com \
    --cc=richard@nod.at \
    --cc=slemieux.tyco@gmail.com \
    --cc=stefan@agner.ch \
    --cc=vz@mleia.com \
    --cc=wens@csie.org \
    --cc=wenyou.yang@microchip.com \
    --cc=xiaolei.li@mediatek.com \
    --cc=yamada.masahiro@socionext.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.