All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>, Hans de Goede <hdegoede@redhat.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB
Date: Fri, 20 Jul 2018 09:27:31 +0200	[thread overview]
Message-ID: <20180720072741.4632-5-hdegoede@redhat.com> (raw)
In-Reply-To: <20180720072741.4632-1-hdegoede@redhat.com>

The volumes are taken from this commit:
https://github.com/plbossart/UCM/commit/753e2430cd0e6cafbf10c6b29b689dbd32ac5250

That commit also adds line-in support, so it has not been
taken in its entirety.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf | 10 +++++++---
 1 file changed, 7 insertions(+), 3 deletions(-)

diff --git a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
index 5dcb11e6..d6e8e48d 100644
--- a/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
+++ b/src/conf/ucm/bytcr-rt5651/bytcr-rt5651.conf
@@ -117,16 +117,13 @@ SectionDefaults [
 	cset "name='sprot_loop_out mix 0 sprot_loop_in Switch' off"
 
 	# default state
-	cset "name='ADC Capture Volume' 126"
 	cset "name='HPO MIX DAC1 Switch' on"
 	cset "name='HPO MIX HPVOL Switch' off"
-	cset "name='HP Playback Volume' 0"
 	cset "name='HPO L Playback Switch' off"
 	cset "name='HPO R Playback Switch' off"
 	cset "name='HPOVOL L Switch' on"
 	cset "name='HPOVOL R Switch' on"
 	cset "name='IF1 ASRC Switch' on"
-	cset "name='IN Capture Volume' 27"
 	cset "name='IN2 Boost' 1"
 	cset "name='IN1 Boost' 1"
 	cset "name='LOUT L Playback Switch' on"
@@ -145,6 +142,13 @@ SectionDefaults [
 	cset "name='Headphone Switch' off"
 	cset "name='Speaker Switch' off"
 
+	# volumes for 0dB
+	cset "name='OUT Playback Volume' 31"
+	cset "name='HP Playback Volume' 31"
+	cset "name='IN Capture Volume' 23"
+	cset "name='ADC Capture Volume' 47"
+	cset "name='DAC1 Playback Volume' 175"
+
 	# input
 	cset "name='Stereo1 ADC L1 Mux' ADC"
 	cset "name='Stereo1 ADC R1 Mux' ADC"
-- 
2.17.1

  parent reply	other threads:[~2018-07-20  7:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-20  7:27 [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Hans de Goede
2018-07-20  7:27 ` [PATCH 01/14] conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf Hans de Goede
2018-07-20  7:27 ` [PATCH 02/14] conf/ucm: bytcr-rt5651: Add support for boards using SSP0 Hans de Goede
2018-07-20  7:27 ` [PATCH 03/14] conf/ucm: bytcr-rt5651: Do not use both DAC1 and HPVOL inputs for HP Hans de Goede
2018-07-20  7:27 ` Hans de Goede [this message]
2018-07-20 13:48   ` [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB Pierre-Louis Bossart
2018-08-08  9:02     ` Hans de Goede
2018-07-20  7:27 ` [PATCH 05/14] conf/ucm: bytcr-rt5651: Start with all outputs and inputs disabled Hans de Goede
2018-07-20  7:27 ` [PATCH 06/14] conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching Hans de Goede
2018-07-20  7:27 ` [PATCH 07/14] conf/ucm: bytcr-rt5651: Use generic SSP enable + disable sequence Hans de Goede
2018-07-20 13:49   ` Pierre-Louis Bossart
2018-08-08  9:03     ` Hans de Goede
2018-07-20  7:27 ` [PATCH 08/14] conf/ucm: bytcr-rt5651: Fix ADC and Mic capture volumes Hans de Goede
2018-07-20  7:27 ` [PATCH 09/14] conf/ucm: bytcr-rt5651: Add support for mic input on various pins Hans de Goede
2018-07-20  7:27 ` [PATCH 10/14] conf/ucm: bytcr-rt5651: Split into 1 .conf file per input / output Hans de Goede
2018-07-20  7:27 ` [PATCH 11/14] conf/ucm: bytcr-rt5651: Add mono speaker output profile Hans de Goede
2018-07-20  7:27 ` [PATCH 12/14] conf/ucm: bytcr-rt5651: Add long-name UCM profiles Hans de Goede
2018-07-20  7:27 ` [PATCH 13/14] conf/ucm: bytcr-rt5651: Add bytcr-rt5651-mono-spk-in2-mic-hp-swapped config Hans de Goede
2018-07-20  7:27 ` [PATCH 14/14] conf/ucm: bytcr-rt5640: Improve human readable input/output names Hans de Goede
2018-07-20 13:51 ` [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Pierre-Louis Bossart
2018-07-22  8:52   ` Takashi Iwai
2018-08-05 16:46     ` Takashi Iwai
2018-08-06  7:41       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180720072741.4632-5-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.