All of lore.kernel.org
 help / color / mirror / Atom feed
From: Hans de Goede <hdegoede@redhat.com>
To: alsa-devel@alsa-project.org
Cc: Takashi Iwai <tiwai@suse.de>, Hans de Goede <hdegoede@redhat.com>,
	Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Subject: [PATCH 08/14] conf/ucm: bytcr-rt5651: Fix ADC and Mic capture volumes
Date: Fri, 20 Jul 2018 09:27:35 +0200	[thread overview]
Message-ID: <20180720072741.4632-9-hdegoede@redhat.com> (raw)
In-Reply-To: <20180720072741.4632-1-hdegoede@redhat.com>

Fix ADC and Mic capture volumes, so that the microphone inputs actually
work.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
---
 src/conf/ucm/rt5651/EnableSeq.conf | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/src/conf/ucm/rt5651/EnableSeq.conf b/src/conf/ucm/rt5651/EnableSeq.conf
index 3ef9afc0..37bffecb 100644
--- a/src/conf/ucm/rt5651/EnableSeq.conf
+++ b/src/conf/ucm/rt5651/EnableSeq.conf
@@ -7,8 +7,6 @@ cset "name='HPOVOL L Switch' on"
 cset "name='HPOVOL R Switch' on"
 cset "name='LOUT MIX DAC L1 Switch' on"
 cset "name='LOUT MIX DAC R1 Switch' on"
-cset "name='IN1 Boost' 1"
-cset "name='IN2 Boost' 1"
 cset "name='IF1 ASRC Switch' on"
 cset "name='LOUT L Playback Switch' off"
 cset "name='LOUT R Playback Switch' off"
@@ -23,12 +21,20 @@ cset "name='Stereo2 ADC MIXR ADC2 Switch' on"
 cset "name='Headphone Switch' off"
 cset "name='Speaker Switch' off"
 
-# volumes for 0dB
+# volumes
 cset "name='OUT Playback Volume' 31"
 cset "name='HP Playback Volume' 31"
-cset "name='IN Capture Volume' 23"
-cset "name='ADC Capture Volume' 47"
 cset "name='DAC1 Playback Volume' 175"
+cset "name='IN Capture Volume' 23"
+# 47=0dB, 0.375 dB/step, set it to 6 dB to help with soft mics
+cset "name='ADC Capture Volume' 63"
+cset "name='ADC Capture Switch' on"
+# Set ADC Boost Gain to 3dB higher vals result in too much noise
+cset "name='ADC Boost Gain' 1"
+# Set IN1, IN2 and IN3 internal mic boost to 1
+cset "name='IN1 Boost' 1"
+cset "name='IN2 Boost' 1"
+cset "name='IN3 Boost' 1"
 
 # input
 cset "name='Stereo1 ADC L1 Mux' ADC"
-- 
2.17.1

  parent reply	other threads:[~2018-07-20  7:27 UTC|newest]

Thread overview: 23+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-20  7:27 [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Hans de Goede
2018-07-20  7:27 ` [PATCH 01/14] conf/ucm: bytcr-rt5645: Use the generic bytcr/PlatformEnableSeq.conf Hans de Goede
2018-07-20  7:27 ` [PATCH 02/14] conf/ucm: bytcr-rt5651: Add support for boards using SSP0 Hans de Goede
2018-07-20  7:27 ` [PATCH 03/14] conf/ucm: bytcr-rt5651: Do not use both DAC1 and HPVOL inputs for HP Hans de Goede
2018-07-20  7:27 ` [PATCH 04/14] conf/ucm: bytcr-rt5651: Configure all volumes at 0dB Hans de Goede
2018-07-20 13:48   ` Pierre-Louis Bossart
2018-08-08  9:02     ` Hans de Goede
2018-07-20  7:27 ` [PATCH 05/14] conf/ucm: bytcr-rt5651: Start with all outputs and inputs disabled Hans de Goede
2018-07-20  7:27 ` [PATCH 06/14] conf/ucm: bytcr-rt5651: Change Speaker/Headphone en/disable sequences to fix switching Hans de Goede
2018-07-20  7:27 ` [PATCH 07/14] conf/ucm: bytcr-rt5651: Use generic SSP enable + disable sequence Hans de Goede
2018-07-20 13:49   ` Pierre-Louis Bossart
2018-08-08  9:03     ` Hans de Goede
2018-07-20  7:27 ` Hans de Goede [this message]
2018-07-20  7:27 ` [PATCH 09/14] conf/ucm: bytcr-rt5651: Add support for mic input on various pins Hans de Goede
2018-07-20  7:27 ` [PATCH 10/14] conf/ucm: bytcr-rt5651: Split into 1 .conf file per input / output Hans de Goede
2018-07-20  7:27 ` [PATCH 11/14] conf/ucm: bytcr-rt5651: Add mono speaker output profile Hans de Goede
2018-07-20  7:27 ` [PATCH 12/14] conf/ucm: bytcr-rt5651: Add long-name UCM profiles Hans de Goede
2018-07-20  7:27 ` [PATCH 13/14] conf/ucm: bytcr-rt5651: Add bytcr-rt5651-mono-spk-in2-mic-hp-swapped config Hans de Goede
2018-07-20  7:27 ` [PATCH 14/14] conf/ucm: bytcr-rt5640: Improve human readable input/output names Hans de Goede
2018-07-20 13:51 ` [PATCH 00/14] conf/ucm: bytcr-rt5651: Various improvements + long-name profiles addition Pierre-Louis Bossart
2018-07-22  8:52   ` Takashi Iwai
2018-08-05 16:46     ` Takashi Iwai
2018-08-06  7:41       ` Hans de Goede

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180720072741.4632-9-hdegoede@redhat.com \
    --to=hdegoede@redhat.com \
    --cc=alsa-devel@alsa-project.org \
    --cc=pierre-louis.bossart@linux.intel.com \
    --cc=tiwai@suse.de \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.