All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jonathan Cameron <jic23@kernel.org>
To: gregkh@linuxfoundation.org, linux-iio@vger.kernel.org
Subject: [PULL] IIO: Second set of new device support, cleanups and features for the 4.19 cycle.
Date: Tue, 24 Jul 2018 21:57:31 +0100	[thread overview]
Message-ID: <20180724215731.71c540ff@archlinux> (raw)

The following changes since commit a98a5c27b54e01dd9c42e2b0addb543f0dc494cd:

  staging: rtl8188eu: remove whitespace - coding style (2018-06-28 22:46:01=
 +0900)

are available in the Git repository at:

  git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio.git tags/iio-for-=
4.19b

for you to fetch changes up to c5b974bee9d2ceae4c441ae5a01e498c2674e100:

  iio: sca3000: Fix missing return in switch (2018-07-24 18:17:18 +0100)

----------------------------------------------------------------
Second set of IIO new device support, features and cleanups.

There are also a couple of fixes that can wait for the coming merge
window.

Core new features

* Support for phase channels (used in time of flight sensors amongst
  other things)
* Support for deep UV light channel modifier.

New Device Support

* AD4758 DAC
  - New driver and dt bindings.
* adxl345
  - Support the adxl375 +-200g part which is register compatible.
* isl29501 Time of flight sensor.
  - New driver
* meson-saradc
  - Support the Meson8m2 Socs - right now this is just an ID, but there will
    be additional difference in future.
* mpu6050
  - New ID for 6515 variant.
* si1133 UV sensor.
  - New driver
* Spreadtrum SC27xx PMIC ADC
  - New driver and dt bindings.

Features

* adxl345
  - Add calibration offset readback and writing.
  - Add sampling frequency control.

Fixes and Cleanups

* ad5933
  - Use a macro for the channel definition to reduce duplication.
* ad9523
  - Replace use of core mlock with a local lock. Part of ongoing efforts
    to avoid confusing the purpose of mlock which is only about iio core
    state changes.
  - Fix displayed phase which was out by a factor of 10.
* adxl345
  - Add a link to the datasheet.
  - Rework the use of the address field in the chan_spec structures to
    allow addition of more per channel information.
* adis imu
  - Mark switch fall throughs.
* at91-sama5d2
  - Fix some casting on big endian systems.
* bmp280
  - Drop some DT elements that aren't used and should mostly be done from
    userspace rather than in DT.
* hx711
  - add clock-frequency dt binding and resulting delay to deal with capacit=
ance
    issue on some boards.
  - fix a spurious unit-address in the example.
* ina2xx
  - Avoid a possible kthread_stop with a stale task_struct.
* ltc2632
  - Remove some unused local variables (assigned but value never used).
* max1363
  - Use device_get_match_data to remove some boilerplate.
* mma8452
  - Mark switch fall throughs.
* sca3000
  - Fix a missing return in a switch statement (a bad fallthrough
    previously!)
* sigma-delta-modulator
  - Drop incorrect unit address from the DT example.
* st_accel
  - Use device_get_match_data to drop some boiler plate.
  - Move to probe_new for i2c driver as second parameter not used.
* st_sensors library
  - Use a strlcpy (safe in this case).
* st_lsm6dsx
  - Add some error logging.
* ti-ads7950
  - SPDX
  - Allow simultaneous buffered and polled reads. Needed on a Lego Mindstor=
ms
    EV3 where some channels are used for power supply monitoring at a very =
low
    rate.
* ti-dac5571
  - Remove an unused variable.
* xadc
  - Drop some dead code.

----------------------------------------------------------------
Akinobu Mita (5):
      iio: accel: adxl345: add link to datasheet
      iio: accel: adxl345: convert address field usage in iio_chan_spec
      iio: accel: adxl345: add calibration offset support
      iio: adc: ina2xx: avoid kthread_stop() with stale task_struct
      iio: accel: adxl345: add sampling frequency support

Andreas Klinger (3):
      iio: hx711: add clock-frequency property in DT
      iio: hx711: add delay until DOUT is ready
      iio: hx711: fix spurious unit-address in example

Baolin Wang (1):
      dt-bindings: iio: Add Spreadtrum SC27XX PMICs ADC controller document=
ation

Brian Masney (2):
      iio: imu: mpu6050: add support for 6515 variant
      iio: pressure: bmp280: remove unused options from device tree documen=
tation

Colin Ian King (2):
      iio: dac: ti-dac5571 remove redundant variable 'shift'
      iio: dac: ltc2632 remove redundant pointer chip_info and spi_dev_id

Dan Carpenter (1):
      iio: adc: at91-sama5d2_adc: fix up casting in at91_adc_read_info_raw()

David Lechner (2):
      iio: adc: ti-ads7950: use SPDX-License-Identifier
      iio: adc: ti-ads7950: allow simultaneous use of buffer and direct mode

Dominique Martinet (1):
      iio: change strncpy+truncation to strlcpy

Fabrice Gasnier (1):
      dt-bindings: iio: sigma-delta-modulator: fix unit-address in example

Freeman Liu (1):
      iio: adc: Add Spreadtrum SC27XX PMICs ADC support

Gustavo A. R. Silva (3):
      iio:imu:adis: Mark expected switch fall-throughs
      iio: mma8452: Mark expected switch fall-through
      iio: sca3000: Fix missing return in switch

Julia Lawall (1):
      iio: adc: max1363: merge calls to of_match_device and of_device_get_m=
atch_data

Karim Eshapa (1):
      staging:iio:impedance-analyzer:ad5933: Macro replacement Cleanups.

Lars-Peter Clausen (3):
      iio: adxl345: Add support for the ADXL375
      iio: ad9523: replace core mlock with local lock
      iio: ad9523: Fix displayed phase

Lorenzo Bianconi (1):
      iio: imu: st_lsm6dsx: add error logs to st_lsm6dsx_read_fifo()

Manish Narani (1):
      iio: adc: xilinx: Remove dead code from xadc_zynq_setup

Martin Blumenstingl (2):
      dt-bindings: iio: adc: add Meson8m2 support
      iio: adc: meson-saradc: add support for the Meson8m2 SoCs

Mathieu Othacehe (2):
      iio: Add channel for Phase
      iio: light: isl29501: Add support for the ISL29501 ToF sensor.

Maxime Roussin-B=C3=A9langer (2):
      iio: Add modifier for DUV light
      iio: light: introduce si1133

Nikolaus Voss (2):
      IIO: st_accel_i2c.c: Simplify access to driver data
      IIO: st_accel_i2c.c: Use probe_new() instead of probe()

Stefan Popa (2):
      iio: dac: Add AD5758 support
      dt-bindings: iio: dac: Add docs for AD5758 DAC

 Documentation/ABI/testing/sysfs-bus-iio            |   14 +-
 Documentation/ABI/testing/sysfs-bus-iio-isl29501   |   47 +
 .../ABI/testing/sysfs-bus-iio-light-si1133         |   22 +
 .../devicetree/bindings/iio/accel/adxl345.txt      |    7 +-
 .../bindings/iio/adc/amlogic,meson-saradc.txt      |    1 +
 .../devicetree/bindings/iio/adc/avia-hx711.txt     |    8 +-
 .../bindings/iio/adc/sigma-delta-modulator.txt     |    2 +-
 .../bindings/iio/adc/sprd,sc27xx-adc.txt           |   36 +
 .../devicetree/bindings/iio/dac/ad5758.txt         |   78 ++
 .../devicetree/bindings/iio/imu/inv_mpu6050.txt    |    1 +
 .../devicetree/bindings/iio/light/isl29501.txt     |   13 +
 .../devicetree/bindings/iio/pressure/bmp085.txt    |    7 -
 MAINTAINERS                                        |    8 +
 drivers/iio/accel/Kconfig                          |    4 +-
 drivers/iio/accel/adxl345.h                        |    7 +-
 drivers/iio/accel/adxl345_core.c                   |  140 ++-
 drivers/iio/accel/adxl345_i2c.c                    |    7 +-
 drivers/iio/accel/adxl345_spi.c                    |    6 +-
 drivers/iio/accel/mma8452.c                        |    1 +
 drivers/iio/accel/sca3000.c                        |    1 +
 drivers/iio/accel/st_accel_i2c.c                   |   64 +-
 drivers/iio/adc/Kconfig                            |   10 +
 drivers/iio/adc/Makefile                           |    1 +
 drivers/iio/adc/at91-sama5d2_adc.c                 |    7 +-
 drivers/iio/adc/hx711.c                            |   39 +
 drivers/iio/adc/ina2xx-adc.c                       |   17 +-
 drivers/iio/adc/max1363.c                          |    8 +-
 drivers/iio/adc/meson_saradc.c                     |    9 +
 drivers/iio/adc/sc27xx_adc.c                       |  522 ++++++++++
 drivers/iio/adc/ti-ads7950.c                       |   43 +-
 drivers/iio/adc/xilinx-xadc-core.c                 |    4 +-
 drivers/iio/common/st_sensors/st_sensors_core.c    |    3 +-
 drivers/iio/dac/Kconfig                            |   10 +
 drivers/iio/dac/Makefile                           |    1 +
 drivers/iio/dac/ad5758.c                           |  897 ++++++++++++++++
 drivers/iio/dac/ltc2632.c                          |    5 -
 drivers/iio/dac/ti-dac5571.c                       |    6 -
 drivers/iio/frequency/ad9523.c                     |   36 +-
 drivers/iio/imu/adis.c                             |    3 +
 drivers/iio/imu/inv_mpu6050/inv_mpu_core.c         |    6 +
 drivers/iio/imu/inv_mpu6050/inv_mpu_i2c.c          |    5 +
 drivers/iio/imu/inv_mpu6050/inv_mpu_iio.h          |    2 +
 drivers/iio/imu/st_lsm6dsx/st_lsm6dsx_buffer.c     |   16 +-
 drivers/iio/industrialio-core.c                    |    2 +
 drivers/iio/light/Kconfig                          |   12 +
 drivers/iio/light/Makefile                         |    1 +
 drivers/iio/light/si1133.c                         | 1068 ++++++++++++++++=
++++
 drivers/iio/pressure/st_pressure_i2c.c             |    3 +-
 drivers/iio/proximity/Kconfig                      |   13 +
 drivers/iio/proximity/Makefile                     |    1 +
 drivers/iio/proximity/isl29501.c                   | 1027 ++++++++++++++++=
+++
 drivers/staging/iio/impedance-analyzer/ad5933.c    |   57 +-
 include/uapi/linux/iio/types.h                     |    2 +
 tools/iio/iio_event_monitor.c                      |    4 +
 54 files changed, 4139 insertions(+), 175 deletions(-)
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-isl29501
 create mode 100644 Documentation/ABI/testing/sysfs-bus-iio-light-si1133
 create mode 100644 Documentation/devicetree/bindings/iio/adc/sprd,sc27xx-a=
dc.txt
 create mode 100644 Documentation/devicetree/bindings/iio/dac/ad5758.txt
 create mode 100644 Documentation/devicetree/bindings/iio/light/isl29501.txt
 create mode 100644 drivers/iio/adc/sc27xx_adc.c
 create mode 100644 drivers/iio/dac/ad5758.c
 create mode 100644 drivers/iio/light/si1133.c
 create mode 100644 drivers/iio/proximity/isl29501.c

             reply	other threads:[~2018-07-24 22:05 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-07-24 20:57 Jonathan Cameron [this message]
2018-07-25  8:14 ` [PULL] IIO: Second set of new device support, cleanups and features for the 4.19 cycle Greg KH

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180724215731.71c540ff@archlinux \
    --to=jic23@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-iio@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.