All of lore.kernel.org
 help / color / mirror / Atom feed
From: Nicolas Ferre <nicolas.ferre@microchip.com>
To: Alexandre Belloni <alexandre.belloni@bootlin.com>,
	Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: <linux-arm-kernel@lists.infradead.org>,
	<linux-kernel@vger.kernel.org>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Boris Brezillon <boris.brezillon@free-electrons.com>
Subject: [PATCH] ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2
Date: Mon, 20 Aug 2018 12:20:41 +0200	[thread overview]
Message-ID: <20180820102041.27476-1-nicolas.ferre@microchip.com> (raw)

As the new bindings are already in place in sama5d2.dtsi and that it's used
in the only Mainline board for this product (at91-sama5d2_ptc_ek.dts), we can
safely remove the old bindings.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
 arch/arm/boot/dts/sama5d2.dtsi | 38 --------------------------------------
 1 file changed, 38 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..fd1a401f2914 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -323,44 +323,6 @@
 			};
 		};
 
-		nand0: nand@80000000 {
-			compatible = "atmel,sama5d2-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = < /* EBI CS3 */
-				0x80000000 0x08000000
-				/* SMC PMECC regs */
-				0xf8014070 0x00000490
-				/* SMC PMECC Error Location regs */
-				0xf8014500 0x00000200
-				/* ROM Galois tables */
-				0x00040000 0x00018000
-				>;
-			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			atmel,nand-has-dma;
-			atmel,has-pmecc;
-			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
-			status = "disabled";
-
-			nfc@c0000000 {
-				compatible = "atmel,sama5d3-nfc";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = < /* NFC Command Registers */
-					0xc0000000 0x08000000
-					/* NFC HSMC regs */
-					0xf8014000 0x00000070
-					/* NFC SRAM banks */
-					0x00100000 0x00100000
-					>;
-				clocks = <&hsmc_clk>;
-				atmel,write-by-sram;
-			};
-		};
-
 		sdmmc0: sdio-host@a0000000 {
 			compatible = "atmel,sama5d2-sdhci";
 			reg = <0xa0000000 0x300>;
-- 
2.15.1


WARNING: multiple messages have this Message-ID (diff)
From: nicolas.ferre@microchip.com (Nicolas Ferre)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH] ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2
Date: Mon, 20 Aug 2018 12:20:41 +0200	[thread overview]
Message-ID: <20180820102041.27476-1-nicolas.ferre@microchip.com> (raw)

As the new bindings are already in place in sama5d2.dtsi and that it's used
in the only Mainline board for this product (at91-sama5d2_ptc_ek.dts), we can
safely remove the old bindings.

Cc: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
---
 arch/arm/boot/dts/sama5d2.dtsi | 38 --------------------------------------
 1 file changed, 38 deletions(-)

diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
index 61f68e5c48e9..fd1a401f2914 100644
--- a/arch/arm/boot/dts/sama5d2.dtsi
+++ b/arch/arm/boot/dts/sama5d2.dtsi
@@ -323,44 +323,6 @@
 			};
 		};
 
-		nand0: nand at 80000000 {
-			compatible = "atmel,sama5d2-nand";
-			#address-cells = <1>;
-			#size-cells = <1>;
-			ranges;
-			reg = < /* EBI CS3 */
-				0x80000000 0x08000000
-				/* SMC PMECC regs */
-				0xf8014070 0x00000490
-				/* SMC PMECC Error Location regs */
-				0xf8014500 0x00000200
-				/* ROM Galois tables */
-				0x00040000 0x00018000
-				>;
-			interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
-			atmel,nand-addr-offset = <21>;
-			atmel,nand-cmd-offset = <22>;
-			atmel,nand-has-dma;
-			atmel,has-pmecc;
-			atmel,pmecc-lookup-table-offset = <0x0 0x8000>;
-			status = "disabled";
-
-			nfc at c0000000 {
-				compatible = "atmel,sama5d3-nfc";
-				#address-cells = <1>;
-				#size-cells = <1>;
-				reg = < /* NFC Command Registers */
-					0xc0000000 0x08000000
-					/* NFC HSMC regs */
-					0xf8014000 0x00000070
-					/* NFC SRAM banks */
-					0x00100000 0x00100000
-					>;
-				clocks = <&hsmc_clk>;
-				atmel,write-by-sram;
-			};
-		};
-
 		sdmmc0: sdio-host at a0000000 {
 			compatible = "atmel,sama5d2-sdhci";
 			reg = <0xa0000000 0x300>;
-- 
2.15.1

             reply	other threads:[~2018-08-20 10:20 UTC|newest]

Thread overview: 2+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-20 10:20 Nicolas Ferre [this message]
2018-08-20 10:20 ` [PATCH] ARM: dts: at91/trivial: remove old NAND bindings leftover in sama5d2 Nicolas Ferre

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180820102041.27476-1-nicolas.ferre@microchip.com \
    --to=nicolas.ferre@microchip.com \
    --cc=alexandre.belloni@bootlin.com \
    --cc=boris.brezillon@free-electrons.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=ludovic.desroches@microchip.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.