From: Peter Rosin <peda@axentia.se> To: linux-kernel@vger.kernel.org Cc: Peter Rosin <peda@axentia.se>, Nicolas Ferre <nicolas.ferre@microchip.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH 1/5] ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low Date: Tue, 28 Aug 2018 11:48:40 +0200 [thread overview] Message-ID: <20180828094844.10018-2-peda@axentia.se> (raw) In-Reply-To: <20180828094844.10018-1-peda@axentia.se> AT91_PINCTRL_OUTPUT_VAL(0) without AT91_PINCTRL_OUTPUT is a no-op, so make sure the pins really output a zero. Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power") Signed-off-by: Peter Rosin <peda@axentia.se> --- arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index af9f38456d04..bfa5815a0721 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -38,14 +38,16 @@ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; }; pinctrl_lcd_hipow0: lcd_hipow0 { atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; }; }; }; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: peda@axentia.se (Peter Rosin) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/5] ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low Date: Tue, 28 Aug 2018 11:48:40 +0200 [thread overview] Message-ID: <20180828094844.10018-2-peda@axentia.se> (raw) In-Reply-To: <20180828094844.10018-1-peda@axentia.se> AT91_PINCTRL_OUTPUT_VAL(0) without AT91_PINCTRL_OUTPUT is a no-op, so make sure the pins really output a zero. Fixes: 0e4323899973 ("ARM: dts: at91: add devicetree for the Axentia Nattis with Natte power") Signed-off-by: Peter Rosin <peda@axentia.se> --- arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index af9f38456d04..bfa5815a0721 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -38,14 +38,16 @@ atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; }; pinctrl_lcd_hipow0: lcd_hipow0 { atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO - AT91_PINCTRL_OUTPUT_VAL(0)>; + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; }; }; }; -- 2.11.0
next prev parent reply other threads:[~2018-08-28 9:49 UTC|newest] Thread overview: 14+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-28 9:48 [PATCH 0/5] ARM: dts: at91: nattis: some cleanup Peter Rosin 2018-08-28 9:48 ` Peter Rosin 2018-08-28 9:48 ` Peter Rosin [this message] 2018-08-28 9:48 ` [PATCH 1/5] ARM: dts: at91: nattis: set the PRLUD and HIPOW signals low Peter Rosin 2018-08-28 9:48 ` [PATCH 2/5] ARM: dts: at91: nattis: make the SD-card slot work Peter Rosin 2018-08-28 9:48 ` Peter Rosin 2018-08-28 9:48 ` [PATCH 3/5] ARM: dts: at91: nattis: state the actual lvds-encoder chip Peter Rosin 2018-08-28 9:48 ` Peter Rosin 2018-08-28 9:48 ` [PATCH 4/5] ARM: dts: at91: nattis: move pinctrls for the lvds chip to the lvds node Peter Rosin 2018-08-28 9:48 ` Peter Rosin 2018-08-28 9:48 ` [PATCH 5/5] ARM: dts: at91: nattis: describe the lvds panel Peter Rosin 2018-08-28 9:48 ` Peter Rosin 2018-08-28 10:18 ` [PATCH 0/5] ARM: dts: at91: nattis: some cleanup Alexandre Belloni 2018-08-28 10:18 ` Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180828094844.10018-2-peda@axentia.se \ --to=peda@axentia.se \ --cc=alexandre.belloni@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.