All of lore.kernel.org
 help / color / mirror / Atom feed
From: Chris Brandt <chris.brandt@renesas.com>
To: Geert Uytterhoeven <geert+renesas@glider.be>,
	Michael Turquette <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>
Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org,
	linux-renesas-soc@vger.kernel.org,
	Simon Horman <horms+renesas@verge.net.au>,
	Chris Brandt <chris.brandt@renesas.com>
Subject: [PATCH v3] clk: renesas: cpg-mssr: Add R7S9210 support
Date: Wed, 29 Aug 2018 08:28:41 -0500	[thread overview]
Message-ID: <20180829132841.64787-1-chris.brandt@renesas.com> (raw)

Add support for the R7S9210 (RZ/A2) Clock Pulse Generator and Module
Standby.

The Module Standby HW in the RZ/A series is very close to R-Car HW, except
for how the registers are laid out.
The MSTP registers are only 8-bits wide, there is no status registers
(MSTPST), and the register offsets are a little different. Since the RZ/A
hardware manuals refer to these registers as the Standby Control Registers,
we'll use that name to distinguish the RZ/A type for the R-Car type.

Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
---
v3:
 * Use actual register bit names and numbers from manual for both DT and
   tables ("36" instead of "306")
 * Do not register reset controller for stbyctrl (RZ/A) SoCs
 * Changed SPDX from "GPL-2.0+" to "GPL-2.0"
v2:
 * num_hw_mod_clks was wrong
 * added ethernet clocks
---
 .../devicetree/bindings/clock/renesas,cpg-mssr.txt |   3 +-
 drivers/clk/renesas/Kconfig                        |   5 +
 drivers/clk/renesas/Makefile                       |   1 +
 drivers/clk/renesas/r7s9210-cpg-mssr.c             | 193 +++++++++++++++++++++
 drivers/clk/renesas/renesas-cpg-mssr.c             |  81 +++++++--
 drivers/clk/renesas/renesas-cpg-mssr.h             |  13 ++
 include/dt-bindings/clock/r7s9210-cpg-mssr.h       |  21 +++
 7 files changed, 304 insertions(+), 13 deletions(-)
 create mode 100644 drivers/clk/renesas/r7s9210-cpg-mssr.c
 create mode 100644 include/dt-bindings/clock/r7s9210-cpg-mssr.h

diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
index 42d0f83d812b..012416b33d2d 100644
--- a/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
+++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mssr.txt
@@ -13,6 +13,7 @@ They provide the following functionalities:
 
 Required Properties:
   - compatible: Must be one of:
+      - "renesas,r7s9210-cpg-mssr" for the r7s9210 SoC (RZ/A2)
       - "renesas,r8a7743-cpg-mssr" for the r8a7743 SoC (RZ/G1M)
       - "renesas,r8a7745-cpg-mssr" for the r8a7745 SoC (RZ/G1E)
       - "renesas,r8a77470-cpg-mssr" for the r8a77470 SoC (RZ/G1C)
@@ -38,7 +39,7 @@ Required Properties:
   - clock-names: List of external parent clock names. Valid names are:
       - "extal" (r8a7743, r8a7745, r8a77470, r8a774a1, r8a7790, r8a7791,
 		 r8a7792, r8a7793, r8a7794, r8a7795, r8a7796, r8a77965,
-		 r8a77970, r8a77980, r8a77990, r8a77995)
+		 r8a77970, r8a77980, r8a77990, r8a77995, r7s9210)
       - "extalr" (r8a774a1, r8a7795, r8a7796, r8a77965, r8a77970, r8a77980)
       - "usb_extal" (r8a7743, r8a7745, r8a77470, r8a7790, r8a7791, r8a7793,
 		     r8a7794)
diff --git a/drivers/clk/renesas/Kconfig b/drivers/clk/renesas/Kconfig
index f998a7333acb..2edcb1bdb487 100644
--- a/drivers/clk/renesas/Kconfig
+++ b/drivers/clk/renesas/Kconfig
@@ -3,6 +3,7 @@ config CLK_RENESAS
 	default y if ARCH_RENESAS
 	select CLK_EMEV2 if ARCH_EMEV2
 	select CLK_RZA1 if ARCH_R7S72100
+	select CLK_R7S9210 if ARCH_R7S9210
 	select CLK_R8A73A4 if ARCH_R8A73A4
 	select CLK_R8A7740 if ARCH_R8A7740
 	select CLK_R8A7743 if ARCH_R8A7743
@@ -46,6 +47,10 @@ config CLK_RZA1
 	bool "RZ/A1H clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
 
+config CLK_R7S9210
+	bool "RZ/A2 clock support" if COMPILE_TEST
+	select CLK_RENESAS_CPG_MSSR
+
 config CLK_R8A73A4
 	bool "R-Mobile APE6 clock support" if COMPILE_TEST
 	select CLK_RENESAS_CPG_MSTP
diff --git a/drivers/clk/renesas/Makefile b/drivers/clk/renesas/Makefile
index 71d4cafe15c0..dbbfd0b0742b 100644
--- a/drivers/clk/renesas/Makefile
+++ b/drivers/clk/renesas/Makefile
@@ -2,6 +2,7 @@
 # SoC
 obj-$(CONFIG_CLK_EMEV2)			+= clk-emev2.o
 obj-$(CONFIG_CLK_RZA1)			+= clk-rz.o
+obj-$(CONFIG_CLK_R7S9210)		+= r7s9210-cpg-mssr.o
 obj-$(CONFIG_CLK_R8A73A4)		+= clk-r8a73a4.o
 obj-$(CONFIG_CLK_R8A7740)		+= clk-r8a7740.o
 obj-$(CONFIG_CLK_R8A7743)		+= r8a7743-cpg-mssr.o
diff --git a/drivers/clk/renesas/r7s9210-cpg-mssr.c b/drivers/clk/renesas/r7s9210-cpg-mssr.c
new file mode 100644
index 000000000000..faba66cea7d4
--- /dev/null
+++ b/drivers/clk/renesas/r7s9210-cpg-mssr.c
@@ -0,0 +1,193 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * R7S9210 Clock Pulse Generator / Module Standby
+ *
+ * Based on r8a7795-cpg-mssr.c
+ *
+ * Copyright (C) 2018 Chris Brandt
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ *
+ */
+
+#include <linux/clk.h>
+#include <linux/clk-provider.h>
+#include <dt-bindings/clock/r7s9210-cpg-mssr.h>
+#include "renesas-cpg-mssr.h"
+
+#define CPG_FRQCR	0x00
+#define CPG_CKIOSEL	0xF0
+#define CPG_SCLKSEL	0xF4
+
+#define PORTL_PIDR	0xFCFFE074
+static u8 cpg_mode;
+
+/* Internal Clock ratio table */
+static const unsigned int ratio_tab[5][5] = {
+			/* I,  G,  B, P1, P0 */
+			{  2,  4,  8, 16, 32 },	/* FRQCR = 0x012 */
+			{  4,  4,  8, 16, 32 },	/* FRQCR = 0x112 */
+			{  8,  4,  8, 16, 32 },	/* FRQCR = 0x212 */
+			{ 16,  8, 16, 16, 32 },	/* FRQCR = 0x322 */
+			{ 16, 16, 32, 32, 32 },	/* FRQCR = 0x333 */
+			};
+
+enum rz_clk_types {
+	CLK_TYPE_RZA_MAIN = CLK_TYPE_CUSTOM,
+	CLK_TYPE_RZA_PLL,
+};
+
+enum clk_ids {
+	/* Core Clock Outputs exported to DT */
+	LAST_DT_CORE_CLK = R7S9210_CLK_P0,
+
+	/* External Input Clocks */
+	CLK_EXTAL,
+
+	/* Internal Core Clocks */
+	CLK_MAIN,
+	CLK_PLL,
+	CLK_I,
+	CLK_G,
+	CLK_B,
+	CLK_P1,
+	CLK_P1C,
+	CLK_P0,
+
+	/* Module Clocks */
+	MOD_CLK_BASE
+};
+
+static struct cpg_core_clk r7s9210_core_clks[] = {
+	/* External Clock Inputs */
+	DEF_INPUT("extal",     CLK_EXTAL),
+
+	/* Internal Core Clocks */
+	DEF_BASE(".main",       CLK_MAIN, CLK_TYPE_RZA_MAIN, CLK_EXTAL),
+	DEF_BASE(".pll",       CLK_PLL, CLK_TYPE_RZA_PLL, CLK_MAIN),
+
+	/* Core Clock Outputs */
+	DEF_FIXED("i",      R7S9210_CLK_I,     CLK_PLL,          2, 1),
+	DEF_FIXED("g",      R7S9210_CLK_G,     CLK_PLL,          4, 1),
+	DEF_FIXED("b",      R7S9210_CLK_B,     CLK_PLL,          8, 1),
+	DEF_FIXED("p1",     R7S9210_CLK_P1,    CLK_PLL,         16, 1),
+	DEF_FIXED("p1c",    R7S9210_CLK_P1C,   CLK_PLL,         16, 1),
+	DEF_FIXED("p0",     R7S9210_CLK_P0,    CLK_PLL,         32, 1),
+};
+
+static const struct mssr_mod_clk r7s9210_mod_clks[] __initconst = {
+	DEF_MOD_STB("ostm0",	 36,	R7S9210_CLK_P1C),
+	DEF_MOD_STB("ostm1",	 35,	R7S9210_CLK_P1C),
+	DEF_MOD_STB("ostm2",	 34,	R7S9210_CLK_P1C),
+
+	DEF_MOD_STB("scif0",	 47,	R7S9210_CLK_P1C),
+	DEF_MOD_STB("scif1",	 46,	R7S9210_CLK_P1C),
+	DEF_MOD_STB("scif2",	 45,	R7S9210_CLK_P1C),
+	DEF_MOD_STB("scif3",	 44,	R7S9210_CLK_P1C),
+	DEF_MOD_STB("scif4",	 43,	R7S9210_CLK_P1C),
+
+	DEF_MOD_STB("ether0",	 65,	R7S9210_CLK_B),
+	DEF_MOD_STB("ether1",	 64,	R7S9210_CLK_B),
+
+	DEF_MOD_STB("i2c0",	 87,	R7S9210_CLK_P1),
+	DEF_MOD_STB("i2c1",	 86,	R7S9210_CLK_P1),
+	DEF_MOD_STB("i2c2",	 85,	R7S9210_CLK_P1),
+	DEF_MOD_STB("i2c3",	 84,	R7S9210_CLK_P1),
+
+};
+
+struct clk * __init rza2_cpg_clk_register(struct device *dev,
+	const struct cpg_core_clk *core, const struct cpg_mssr_info *info,
+	struct clk **clks, void __iomem *base,
+	struct raw_notifier_head *notifiers)
+{
+	const struct clk *parent;
+	unsigned int mult = 1;
+	unsigned int div = 1;
+	u16 frqcr;
+	u8 index;
+	int i;
+
+	parent = clks[core->parent];
+	if (IS_ERR(parent))
+		return ERR_CAST(parent);
+
+	switch (core->id) {
+	case CLK_MAIN:
+		break;
+
+	case CLK_PLL:
+		if (cpg_mode)
+			mult = 44;	/* Divider 1 is 1/2 */
+		else
+			mult = 88;	/* Divider 1 is 1 */
+		break;
+
+	default:
+		return ERR_PTR(-EINVAL);
+	}
+
+	/* Adjust the dividers based on the current FRQCR setting */
+	if (core->id == CLK_MAIN) {
+
+		/* If EXTAL is above 12MHz, then we know it is Mode 1 */
+		if (clk_get_rate((struct clk *)parent) > 12000000)
+			cpg_mode = 1;
+
+		frqcr = clk_readl(base + CPG_FRQCR) & 0xFFF;
+		if (frqcr == 0x012)
+			index = 0;
+		else if (frqcr == 0x112)
+			index = 1;
+		else if (frqcr == 0x212)
+			index = 2;
+		else if (frqcr == 0x322)
+			index = 3;
+		else if (frqcr == 0x333)
+			index = 4;
+		else
+			BUG_ON(1);	/* Illegal FRQCR value */
+
+		for (i = 0; i < ARRAY_SIZE(r7s9210_core_clks); i++) {
+			switch (r7s9210_core_clks[i].id) {
+			case R7S9210_CLK_I:
+				r7s9210_core_clks[i].div = ratio_tab[index][0];
+				break;
+			case R7S9210_CLK_G:
+				r7s9210_core_clks[i].div = ratio_tab[index][1];
+				break;
+			case R7S9210_CLK_B:
+				r7s9210_core_clks[i].div = ratio_tab[index][2];
+				break;
+			case R7S9210_CLK_P1:
+			case R7S9210_CLK_P1C:
+				r7s9210_core_clks[i].div = ratio_tab[index][3];
+				break;
+			case R7S9210_CLK_P0:
+				r7s9210_core_clks[i].div = ratio_tab[index][4];
+				break;
+			}
+		}
+	}
+
+	return clk_register_fixed_factor(NULL, core->name,
+					 __clk_get_name(parent), 0, mult, div);
+}
+
+const struct cpg_mssr_info r7s9210_cpg_mssr_info __initconst = {
+	/* Core Clocks */
+	.core_clks = r7s9210_core_clks,
+	.num_core_clks = ARRAY_SIZE(r7s9210_core_clks),
+	.last_dt_core_clk = LAST_DT_CORE_CLK,
+	.num_total_core_clks = MOD_CLK_BASE,
+
+	/* Module Clocks */
+	.mod_clks = r7s9210_mod_clks,
+	.num_mod_clks = ARRAY_SIZE(r7s9210_mod_clks),
+	.num_hw_mod_clks = 11 * 32, /* includes STBCR0/1/2 which don't exist */
+
+	/* Callbacks */
+	.cpg_clk_register = rza2_cpg_clk_register,
+
+	/* RZ/A2 has Standby Control Registers */
+	.stbyctrl = true,
+};
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.c b/drivers/clk/renesas/renesas-cpg-mssr.c
index f90b0d0ba46a..14cde80716e4 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.c
+++ b/drivers/clk/renesas/renesas-cpg-mssr.c
@@ -73,6 +73,17 @@ static const u16 smstpcr[] = {
 
 #define	SMSTPCR(i)	smstpcr[i]
 
+/*
+ * Standby Control Register offsets (RZ/A)
+ * Base address is FRQCR register
+ */
+
+static const u16 stbcr[] = {
+	0x000, 0x000, 0x014, 0x410, 0x414, 0x418, 0x41C, 0x420,
+	0x424, 0x428, 0x42C, 0x430, 0x434, 0x460,
+};
+
+#define	STBCR(i)	stbcr[i]
 
 /*
  * Software Reset Register offsets
@@ -110,6 +121,7 @@ static const u16 srcr[] = {
  * @notifiers: Notifier chain to save/restore clock state for system resume
  * @smstpcr_saved[].mask: Mask of SMSTPCR[] bits under our control
  * @smstpcr_saved[].val: Saved values of SMSTPCR[]
+ * @stbyctrl: This device has Standby Control Registers
  */
 struct cpg_mssr_priv {
 #ifdef CONFIG_RESET_CONTROLLER
@@ -123,6 +135,7 @@ struct cpg_mssr_priv {
 	unsigned int num_core_clks;
 	unsigned int num_mod_clks;
 	unsigned int last_dt_core_clk;
+	bool stbyctrl;
 
 	struct raw_notifier_head notifiers;
 	struct {
@@ -162,16 +175,29 @@ static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable)
 		enable ? "ON" : "OFF");
 	spin_lock_irqsave(&priv->rmw_lock, flags);
 
-	value = readl(priv->base + SMSTPCR(reg));
-	if (enable)
-		value &= ~bitmask;
-	else
-		value |= bitmask;
-	writel(value, priv->base + SMSTPCR(reg));
+	if (priv->stbyctrl) {
+		value = readb(priv->base + STBCR(reg));
+		if (enable)
+			value &= ~bitmask;
+		else
+			value |= bitmask;
+		writeb(value, priv->base + STBCR(reg));
+
+		/* dummy read to ensure write has completed */
+		readb(priv->base + STBCR(reg));
+		barrier_data(priv->base + STBCR(reg));
+	} else {
+		value = readl(priv->base + SMSTPCR(reg));
+		if (enable)
+			value &= ~bitmask;
+		else
+			value |= bitmask;
+		writel(value, priv->base + SMSTPCR(reg));
+	}
 
 	spin_unlock_irqrestore(&priv->rmw_lock, flags);
 
-	if (!enable)
+	if (!enable || priv->stbyctrl)
 		return 0;
 
 	for (i = 1000; i > 0; --i) {
@@ -205,7 +231,10 @@ static int cpg_mstp_clock_is_enabled(struct clk_hw *hw)
 	struct cpg_mssr_priv *priv = clock->priv;
 	u32 value;
 
-	value = readl(priv->base + MSTPSR(clock->index / 32));
+	if (priv->stbyctrl)
+		value = readb(priv->base + STBCR(clock->index / 32));
+	else
+		value = readl(priv->base + MSTPSR(clock->index / 32));
 
 	return !(value & BIT(clock->index % 32));
 }
@@ -226,6 +255,7 @@ struct clk *cpg_mssr_clk_src_twocell_get(struct of_phandle_args *clkspec,
 	unsigned int idx;
 	const char *type;
 	struct clk *clk;
+	int range_check;
 
 	switch (clkspec->args[0]) {
 	case CPG_CORE:
@@ -240,8 +270,14 @@ struct clk *cpg_mssr_clk_src_twocell_get(struct of_phandle_args *clkspec,
 
 	case CPG_MOD:
 		type = "module";
-		idx = MOD_CLK_PACK(clkidx);
-		if (clkidx % 100 > 31 || idx >= priv->num_mod_clks) {
+		if (priv->stbyctrl) {
+			idx = MOD_CLK_PACK_10(clkidx);
+			range_check = 7 - (clkidx % 10);
+		} else {
+			idx = MOD_CLK_PACK_10(clkidx);
+			range_check = 31 - (clkidx % 100);
+		}
+		if (range_check < 0 || idx >= priv->num_mod_clks) {
 			dev_err(dev, "Invalid %s clock index %u\n", type,
 				clkidx);
 			return ERR_PTR(-EINVAL);
@@ -740,6 +776,12 @@ static const struct of_device_id cpg_mssr_match[] = {
 		.compatible = "renesas,r8a77995-cpg-mssr",
 		.data = &r8a77995_cpg_mssr_info,
 	},
+#endif
+#ifdef CONFIG_CLK_R7S9210
+	{
+		.compatible = "renesas,r7s9210-cpg-mssr",
+		.data = &r7s9210_cpg_mssr_info,
+	},
 #endif
 	{ /* sentinel */ }
 };
@@ -791,13 +833,23 @@ static int cpg_mssr_resume_noirq(struct device *dev)
 		if (!mask)
 			continue;
 
-		oldval = readl(priv->base + SMSTPCR(reg));
+		if (priv->stbyctrl)
+			oldval = readb(priv->base + STBCR(reg));
+		else
+			oldval = readl(priv->base + SMSTPCR(reg));
 		newval = oldval & ~mask;
 		newval |= priv->smstpcr_saved[reg].val & mask;
 		if (newval == oldval)
 			continue;
 
-		writel(newval, priv->base + SMSTPCR(reg));
+		if (priv->stbyctrl) {
+			writeb(newval, priv->base + STBCR(reg));
+			/* dummy read to ensure write has completed */
+			readb(priv->base + STBCR(reg));
+			barrier_data(priv->base + STBCR(reg));
+			continue;
+		} else
+			writel(newval, priv->base + SMSTPCR(reg));
 
 		/* Wait until enabled clocks are really enabled */
 		mask &= ~priv->smstpcr_saved[reg].val;
@@ -869,6 +921,7 @@ static int __init cpg_mssr_probe(struct platform_device *pdev)
 	priv->num_mod_clks = info->num_hw_mod_clks;
 	priv->last_dt_core_clk = info->last_dt_core_clk;
 	RAW_INIT_NOTIFIER_HEAD(&priv->notifiers);
+	priv->stbyctrl = info->stbyctrl;
 
 	for (i = 0; i < nclks; i++)
 		clks[i] = ERR_PTR(-ENOENT);
@@ -894,6 +947,10 @@ static int __init cpg_mssr_probe(struct platform_device *pdev)
 	if (error)
 		return error;
 
+	/* Reset Controller not supported for Standby Control SoCs */
+	if (info->stbyctrl)
+		return 0;
+
 	error = cpg_mssr_reset_controller_register(priv);
 	if (error)
 		return error;
diff --git a/drivers/clk/renesas/renesas-cpg-mssr.h b/drivers/clk/renesas/renesas-cpg-mssr.h
index 2e1730bc5ef2..58f32b38e99a 100644
--- a/drivers/clk/renesas/renesas-cpg-mssr.h
+++ b/drivers/clk/renesas/renesas-cpg-mssr.h
@@ -78,6 +78,13 @@ struct mssr_mod_clk {
 #define DEF_MOD(_name, _mod, _parent...)	\
 	{ .name = _name, .id = MOD_CLK_ID(_mod), .parent = _parent }
 
+/* Convert from sparse base-10 to packed index space */
+#define MOD_CLK_PACK_10(x)	((x / 10) * 32 + (x % 10))
+
+#define MOD_CLK_ID_10(x)	(MOD_CLK_BASE + MOD_CLK_PACK_10(x))
+
+#define DEF_MOD_STB(_name, _mod, _parent...)	\
+	{ .name = _name, .id = MOD_CLK_ID_10(_mod), .parent = _parent }
 
 struct device_node;
 
@@ -103,6 +110,10 @@ struct device_node;
      *
      * @init: Optional callback to perform SoC-specific initialization
      * @cpg_clk_register: Optional callback to handle special Core Clock types
+     *
+     * @stbyctrl: This device has Standby Control Registers which are 8-bits
+     *            wide, no status registers (MSTPSR) and have different address
+     *            offsets.
      */
 
 struct cpg_mssr_info {
@@ -111,6 +122,7 @@ struct cpg_mssr_info {
 	unsigned int num_core_clks;
 	unsigned int last_dt_core_clk;
 	unsigned int num_total_core_clks;
+	bool stbyctrl;
 
 	/* Module Clocks */
 	const struct mssr_mod_clk *mod_clks;
@@ -149,6 +161,7 @@ extern const struct cpg_mssr_info r8a77970_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a77980_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a77990_cpg_mssr_info;
 extern const struct cpg_mssr_info r8a77995_cpg_mssr_info;
+extern const struct cpg_mssr_info r7s9210_cpg_mssr_info;
 
 
     /*
diff --git a/include/dt-bindings/clock/r7s9210-cpg-mssr.h b/include/dt-bindings/clock/r7s9210-cpg-mssr.h
new file mode 100644
index 000000000000..676cc6321d8f
--- /dev/null
+++ b/include/dt-bindings/clock/r7s9210-cpg-mssr.h
@@ -0,0 +1,21 @@
+/* SPDX-License-Identifier: GPL-2.0
+ *
+ * Copyright (C) 2018 Renesas Electronics Corp.
+ *
+ */
+
+#ifndef __DT_BINDINGS_CLOCK_R7S9210_CPG_MSSR_H__
+#define __DT_BINDINGS_CLOCK_R7S9210_CPG_MSSR_H__
+
+#include <dt-bindings/clock/renesas-cpg-mssr.h>
+
+/* R7S9210 CPG Core Clocks */
+#define R7S9210_CLK_PLL			0
+#define R7S9210_CLK_I			1
+#define R7S9210_CLK_G			2
+#define R7S9210_CLK_B			3
+#define R7S9210_CLK_P1			4
+#define R7S9210_CLK_P1C			5
+#define R7S9210_CLK_P0			6
+
+#endif /* __DT_BINDINGS_CLOCK_R7S9210_CPG_MSSR_H__ */
-- 
2.16.1

             reply	other threads:[~2018-08-29 13:28 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-29 13:28 Chris Brandt [this message]
2018-09-05 14:12 ` [PATCH v3] clk: renesas: cpg-mssr: Add R7S9210 support Chris Brandt
2018-09-05 14:12   ` Chris Brandt
2018-09-05 14:31   ` Geert Uytterhoeven
2018-09-05 15:02     ` Chris Brandt
2018-09-05 15:02       ` Chris Brandt
2018-09-05 15:02       ` Chris Brandt
2018-09-05 15:07       ` Geert Uytterhoeven
2018-09-05 15:31         ` Chris Brandt
2018-09-05 15:31           ` Chris Brandt
2018-09-05 15:31           ` Chris Brandt
2018-09-06 11:55 ` Geert Uytterhoeven
2018-09-06 14:31   ` Chris Brandt
2018-09-06 14:31     ` Chris Brandt
2018-09-06 14:31     ` Chris Brandt
2018-09-10 13:18     ` Geert Uytterhoeven

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180829132841.64787-1-chris.brandt@renesas.com \
    --to=chris.brandt@renesas.com \
    --cc=devicetree@vger.kernel.org \
    --cc=geert+renesas@glider.be \
    --cc=horms+renesas@verge.net.au \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=mturquette@baylibre.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.