From: Miquel Raynal <miquel.raynal@bootlin.com> To: Gregory Clement <gregory.clement@bootlin.com>, Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Cc: devicetree@vger.kernel.org, Antoine Tenart <antoine.tenart@bootlin.com>, Maxime Chevallier <maxime.chevallier@bootlin.com>, Nadav Haklai <nadavh@marvell.com>, Rob Herring <robh+dt@kernel.org>, Thomas Petazzoni <thomas.petazzoni@bootlin.com>, Miquel Raynal <miquel.raynal@bootlin.com>, linux-arm-kernel@lists.infradead.org Subject: [RESEND PATCH 2/4] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file Date: Thu, 30 Aug 2018 10:14:59 +0200 [thread overview] Message-ID: <20180830081501.11569-2-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20180830081501.11569-1-miquel.raynal@bootlin.com> Add a thermal-zone node and fill in all the sensors available in an ap806 (one in the IC plus one per CPU). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 3da3a13f7ee1..7d94c1fa592a 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /dts-v1/; @@ -265,8 +266,67 @@ ap_thermal: thermal-sensor@80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + #thermal-sensor-cells = <1>; }; }; }; }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * The cooling maps are always empty as there are no cooling devices. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 0>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu4: ap-thermal-cpu4 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { }; + cooling-maps { }; + }; + }; }; -- 2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: miquel.raynal@bootlin.com (Miquel Raynal) To: linux-arm-kernel@lists.infradead.org Subject: [RESEND PATCH 2/4] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file Date: Thu, 30 Aug 2018 10:14:59 +0200 [thread overview] Message-ID: <20180830081501.11569-2-miquel.raynal@bootlin.com> (raw) In-Reply-To: <20180830081501.11569-1-miquel.raynal@bootlin.com> Add a thermal-zone node and fill in all the sensors available in an ap806 (one in the IC plus one per CPU). Signed-off-by: Miquel Raynal <miquel.raynal@bootlin.com> --- arch/arm64/boot/dts/marvell/armada-ap806.dtsi | 60 +++++++++++++++++++ 1 file changed, 60 insertions(+) diff --git a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi index 3da3a13f7ee1..7d94c1fa592a 100644 --- a/arch/arm64/boot/dts/marvell/armada-ap806.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-ap806.dtsi @@ -6,6 +6,7 @@ */ #include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/thermal/thermal.h> /dts-v1/; @@ -265,8 +266,67 @@ ap_thermal: thermal-sensor at 80 { compatible = "marvell,armada-ap806-thermal"; reg = <0x80 0x10>; + #thermal-sensor-cells = <1>; }; }; }; }; + + /* + * The thermal IP features one internal sensor plus, if applicable, one + * remote channel wired to one sensor per CPU. + * + * The cooling maps are always empty as there are no cooling devices. + */ + thermal-zones { + ap_thermal_ic: ap-thermal-ic { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 0>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu1: ap-thermal-cpu1 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 1>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu2: ap-thermal-cpu2 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 2>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu3: ap-thermal-cpu3 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 3>; + + trips { }; + cooling-maps { }; + }; + + ap_thermal_cpu4: ap-thermal-cpu4 { + polling-delay-passive = <1000>; + polling-delay = <1000>; + + thermal-sensors = <&ap_thermal 4>; + + trips { }; + cooling-maps { }; + }; + }; }; -- 2.17.1
next prev parent reply other threads:[~2018-08-30 8:14 UTC|newest] Thread overview: 16+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-30 8:14 [RESEND PATCH 1/4] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon Miquel Raynal 2018-08-30 8:14 ` Miquel Raynal 2018-08-30 8:14 ` Miquel Raynal [this message] 2018-08-30 8:14 ` [RESEND PATCH 2/4] arm64: dts: marvell: add thermal-zone node in ap806 DTSI file Miquel Raynal 2018-09-21 14:15 ` Gregory CLEMENT 2018-09-21 14:15 ` Gregory CLEMENT 2018-08-30 8:15 ` [RESEND PATCH 3/4] arm64: dts: marvell: add macro to make distinction between node names Miquel Raynal 2018-08-30 8:15 ` Miquel Raynal 2018-09-21 14:15 ` Gregory CLEMENT 2018-09-21 14:15 ` Gregory CLEMENT 2018-08-30 8:15 ` [RESEND PATCH 4/4] arm64: dts: marvell: add thermal-zone node in cp110 DTSI file Miquel Raynal 2018-08-30 8:15 ` Miquel Raynal 2018-09-21 14:15 ` Gregory CLEMENT 2018-09-21 14:15 ` Gregory CLEMENT 2018-09-21 14:14 ` [RESEND PATCH 1/4] arm64: dts: marvell: move AP806/CP110 thermal nodes into a new syscon Gregory CLEMENT 2018-09-21 14:14 ` Gregory CLEMENT
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180830081501.11569-2-miquel.raynal@bootlin.com \ --to=miquel.raynal@bootlin.com \ --cc=andrew@lunn.ch \ --cc=antoine.tenart@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=gregory.clement@bootlin.com \ --cc=jason@lakedaemon.net \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=maxime.chevallier@bootlin.com \ --cc=nadavh@marvell.com \ --cc=robh+dt@kernel.org \ --cc=sebastian.hesselbarth@gmail.com \ --cc=thomas.petazzoni@bootlin.com \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.