All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Andrew F. Davis" <afd@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>
Cc: <linux-omap@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	"Andrew F . Davis" <afd@ti.com>
Subject: [PATCH 2/3] ARM: dts: am572x-idk: Add tricolor Industrial LED support
Date: Fri, 31 Aug 2018 14:34:02 -0500	[thread overview]
Message-ID: <20180831193403.26777-2-afd@ti.com> (raw)
In-Reply-To: <20180831193403.26777-1-afd@ti.com>

AM572x-IDK rev 1.3A has tricolor RGB LEDs that can be controlled using
GPIO. Expose these to userspace for usage as necessary.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 arch/arm/boot/dts/am572x-idk-common.dtsi | 76 ++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 784639ddf451..a064f13b3880 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -55,6 +55,82 @@
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {
-- 
2.18.0


WARNING: multiple messages have this Message-ID (diff)
From: "Andrew F. Davis" <afd@ti.com>
To: "Benoît Cousson" <bcousson@baylibre.com>,
	"Tony Lindgren" <tony@atomide.com>,
	"Rob Herring" <robh+dt@kernel.org>,
	"Mark Rutland" <mark.rutland@arm.com>
Cc: linux-omap@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Andrew F . Davis" <afd@ti.com>
Subject: [PATCH 2/3] ARM: dts: am572x-idk: Add tricolor Industrial LED support
Date: Fri, 31 Aug 2018 14:34:02 -0500	[thread overview]
Message-ID: <20180831193403.26777-2-afd@ti.com> (raw)
In-Reply-To: <20180831193403.26777-1-afd@ti.com>

AM572x-IDK rev 1.3A has tricolor RGB LEDs that can be controlled using
GPIO. Expose these to userspace for usage as necessary.

Signed-off-by: Andrew F. Davis <afd@ti.com>
---
 arch/arm/boot/dts/am572x-idk-common.dtsi | 76 ++++++++++++++++++++++++
 1 file changed, 76 insertions(+)

diff --git a/arch/arm/boot/dts/am572x-idk-common.dtsi b/arch/arm/boot/dts/am572x-idk-common.dtsi
index 784639ddf451..a064f13b3880 100644
--- a/arch/arm/boot/dts/am572x-idk-common.dtsi
+++ b/arch/arm/boot/dts/am572x-idk-common.dtsi
@@ -55,6 +55,82 @@
 			linux,default-trigger = "mmc0";
 		};
 	};
+
+	idk-leds {
+		status = "disabled";
+		compatible = "gpio-leds";
+		red0-led {
+			label = "idk:red0";
+			gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green0-led {
+			label = "idk:green0";
+			gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue0-led {
+			label = "idk:blue0";
+			gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red1-led {
+			label = "idk:red1";
+			gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green1-led {
+			label = "idk:green1";
+			gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue1-led {
+			label = "idk:blue1";
+			gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red2-led {
+			label = "idk:red2";
+			gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green2-led {
+			label = "idk:green2";
+			gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue2-led {
+			label = "idk:blue2";
+			gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		red3-led {
+			label = "idk:red3";
+			gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		green3-led {
+			label = "idk:green3";
+			gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+
+		blue3-led {
+			label = "idk:blue3";
+			gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
+			default-state = "off";
+		};
+	};
 };
 
 &extcon_usb2 {
-- 
2.18.0

  reply	other threads:[~2018-08-31 19:34 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-08-31 19:34 [PATCH 1/3] ARM: dts: am571x-idk: Add tricolor Industrial LED support Andrew F. Davis
2018-08-31 19:34 ` Andrew F. Davis
2018-08-31 19:34 ` Andrew F. Davis [this message]
2018-08-31 19:34   ` [PATCH 2/3] ARM: dts: am572x-idk: " Andrew F. Davis
2018-08-31 19:34 ` [PATCH 3/3] ARM: dts: am571x-idk: Add Industrial input load trigger Andrew F. Davis
2018-08-31 19:34   ` Andrew F. Davis
2018-09-07 17:29 ` [PATCH 1/3] ARM: dts: am571x-idk: Add tricolor Industrial LED support Tony Lindgren

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180831193403.26777-2-afd@ti.com \
    --to=afd@ti.com \
    --cc=bcousson@baylibre.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-omap@vger.kernel.org \
    --cc=mark.rutland@arm.com \
    --cc=robh+dt@kernel.org \
    --cc=tony@atomide.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.