From: Peter Rosin <peda@axentia.se> To: linux-kernel@vger.kernel.org Cc: Peter Rosin <peda@axentia.se>, Nicolas Ferre <nicolas.ferre@microchip.com>, Alexandre Belloni <alexandre.belloni@bootlin.com>, Rob Herring <robh+dt@kernel.org>, Mark Rutland <mark.rutland@arm.com>, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org Subject: [PATCH 1/2] ARM: dts: at91: nattis: drop three indentation levels Date: Fri, 31 Aug 2018 22:44:02 +0200 [thread overview] Message-ID: <20180831204403.14653-2-peda@axentia.se> (raw) In-Reply-To: <20180831204403.14653-1-peda@axentia.se> Make use of the recently added &pinctrl and &watchdog labels. This makes the whole file consistent and knowledge of the ahb/apb structure is hidden. Signed-off-by: Peter Rosin <peda@axentia.se> --- arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 72 ++++++++++++----------------- 1 file changed, 30 insertions(+), 42 deletions(-) diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index 97e972aefac2..911d2c7c1500 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -16,48 +16,6 @@ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl@fffff200 { - nattis { - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOD 28 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOD 5 - AT91_PERIPH_GPIO - AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_lvds_prlud0: lvds_prlud0 { - atmel,pins = - <AT91_PIOA 21 - AT91_PERIPH_GPIO - (AT91_PINCTRL_OUTPUT | - AT91_PINCTRL_OUTPUT_VAL(0))>; - }; - - pinctrl_lvds_hipow0: lvds_hipow0 { - atmel,pins = - <AT91_PIOA 23 - AT91_PERIPH_GPIO - (AT91_PINCTRL_OUTPUT | - AT91_PINCTRL_OUTPUT_VAL(0))>; - }; - }; - }; - - watchdog@fffffe40 { - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -183,6 +141,36 @@ }; }; +&pinctrl { + nattis { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO + AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_lvds_prlud0: lvds_prlud0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + + pinctrl_lvds_hipow0: lvds_hipow0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &i2c0 { status = "okay"; -- 2.11.0
WARNING: multiple messages have this Message-ID (diff)
From: peda@axentia.se (Peter Rosin) To: linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/2] ARM: dts: at91: nattis: drop three indentation levels Date: Fri, 31 Aug 2018 22:44:02 +0200 [thread overview] Message-ID: <20180831204403.14653-2-peda@axentia.se> (raw) In-Reply-To: <20180831204403.14653-1-peda@axentia.se> Make use of the recently added &pinctrl and &watchdog labels. This makes the whole file consistent and knowledge of the ahb/apb structure is hidden. Signed-off-by: Peter Rosin <peda@axentia.se> --- arch/arm/boot/dts/at91-nattis-2-natte-2.dts | 72 ++++++++++++----------------- 1 file changed, 30 insertions(+), 42 deletions(-) diff --git a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts index 97e972aefac2..911d2c7c1500 100644 --- a/arch/arm/boot/dts/at91-nattis-2-natte-2.dts +++ b/arch/arm/boot/dts/at91-nattis-2-natte-2.dts @@ -16,48 +16,6 @@ compatible = "axentia,nattis-2", "axentia,natte-2", "axentia,linea", "atmel,sama5d31", "atmel,sama5d3", "atmel,sama5"; - ahb { - apb { - pinctrl at fffff200 { - nattis { - pinctrl_usba_vbus: usba_vbus { - atmel,pins = - <AT91_PIOD 28 - AT91_PERIPH_GPIO - AT91_PINCTRL_DEGLITCH>; - }; - - pinctrl_mmc0_cd: mmc0_cd { - atmel,pins = - <AT91_PIOD 5 - AT91_PERIPH_GPIO - AT91_PINCTRL_PULL_UP_DEGLITCH>; - }; - - pinctrl_lvds_prlud0: lvds_prlud0 { - atmel,pins = - <AT91_PIOA 21 - AT91_PERIPH_GPIO - (AT91_PINCTRL_OUTPUT | - AT91_PINCTRL_OUTPUT_VAL(0))>; - }; - - pinctrl_lvds_hipow0: lvds_hipow0 { - atmel,pins = - <AT91_PIOA 23 - AT91_PERIPH_GPIO - (AT91_PINCTRL_OUTPUT | - AT91_PINCTRL_OUTPUT_VAL(0))>; - }; - }; - }; - - watchdog at fffffe40 { - status = "okay"; - }; - }; - }; - gpio-keys { compatible = "gpio-keys"; @@ -183,6 +141,36 @@ }; }; +&pinctrl { + nattis { + pinctrl_usba_vbus: usba_vbus { + atmel,pins = <AT91_PIOD 28 AT91_PERIPH_GPIO + AT91_PINCTRL_DEGLITCH>; + }; + + pinctrl_mmc0_cd: mmc0_cd { + atmel,pins = <AT91_PIOD 5 AT91_PERIPH_GPIO + AT91_PINCTRL_PULL_UP_DEGLITCH>; + }; + + pinctrl_lvds_prlud0: lvds_prlud0 { + atmel,pins = <AT91_PIOA 21 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + + pinctrl_lvds_hipow0: lvds_hipow0 { + atmel,pins = <AT91_PIOA 23 AT91_PERIPH_GPIO + (AT91_PINCTRL_OUTPUT | + AT91_PINCTRL_OUTPUT_VAL(0))>; + }; + }; +}; + +&watchdog { + status = "okay"; +}; + &i2c0 { status = "okay"; -- 2.11.0
next prev parent reply other threads:[~2018-08-31 20:44 UTC|newest] Thread overview: 8+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-08-31 20:44 [PATCH 0/2] ARM: dts: at91: nattis/tse850: drop 3 indentation levels Peter Rosin 2018-08-31 20:44 ` Peter Rosin 2018-08-31 20:44 ` Peter Rosin [this message] 2018-08-31 20:44 ` [PATCH 1/2] ARM: dts: at91: nattis: drop three " Peter Rosin 2018-08-31 20:44 ` [PATCH 2/2] ARM: dts: at91: tse850: " Peter Rosin 2018-08-31 20:44 ` Peter Rosin 2018-09-03 14:19 ` [PATCH 0/2] ARM: dts: at91: nattis/tse850: drop 3 " Alexandre Belloni 2018-09-03 14:19 ` Alexandre Belloni
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20180831204403.14653-2-peda@axentia.se \ --to=peda@axentia.se \ --cc=alexandre.belloni@bootlin.com \ --cc=devicetree@vger.kernel.org \ --cc=linux-arm-kernel@lists.infradead.org \ --cc=linux-kernel@vger.kernel.org \ --cc=mark.rutland@arm.com \ --cc=nicolas.ferre@microchip.com \ --cc=robh+dt@kernel.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.