From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: lee.jones@linaro.org, robh+dt@kernel.org, broonie@kernel.org
Cc: mark.rutland@arm.com, lgirdwood@gmail.com,
bgoswami@codeaurora.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, vkoul@kernel.org,
alsa-devel@alsa-project.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v3 03/13] mfd: wcd9335: add wcd irq support
Date: Tue, 4 Sep 2018 11:24:50 +0100 [thread overview]
Message-ID: <20180904102500.30318-4-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20180904102500.30318-1-srinivas.kandagatla@linaro.org>
WCD9335 supports two lines of irqs INTR1 and INTR2. Multiple interrupts
are muxed via these lines. INTR1 consists of all possible interrupt
sources like: Ear OCP, HPH OCP, MBHC, MAD, VBAT, and SVA. INTR2 is a
subset of first interrupt sources like MAD, VBAT, and SVA
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
drivers/mfd/wcd9335-core.c | 78 +++++++++++++++++++++++++++++
include/linux/mfd/wcd9335/wcd9335.h | 33 ++++++++++++
2 files changed, 111 insertions(+)
diff --git a/drivers/mfd/wcd9335-core.c b/drivers/mfd/wcd9335-core.c
index dbfae50c28b2..e2fc438c1a34 100644
--- a/drivers/mfd/wcd9335-core.c
+++ b/drivers/mfd/wcd9335-core.c
@@ -3,6 +3,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/core.h>
#include <linux/mfd/wcd9335/registers.h>
@@ -10,6 +11,7 @@
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -84,6 +86,52 @@ static struct regmap_config wcd9335_ifc_regmap_config = {
.num_ranges = ARRAY_SIZE(wcd9335_ifc_ranges),
};
+static const struct regmap_irq wcd9335_irqs[] = {
+ /* INTR_REG 0 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_SLIMBUS, 0, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_FLL_LOCK_LOSS, 0, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_OCPL_FAULT, 0, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_OCPR_FAULT, 0, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_EAR_PA_OCP_FAULT, 0, BIT(4)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_CNPL_COMPLETE, 0, BIT(5)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_CNPR_COMPLETE, 0, BIT(6)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_EAR_PA_CNP_COMPLETE, 0, BIT(7)),
+ /* INTR_REG 1 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_SW_DET, 1, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_ELECT_INS_REM_DET, 1, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_BUTTON_PRESS_DET, 1, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_BUTTON_RELEASE_DET, 1, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_ELECT_INS_REM_LEG_DET, 1, BIT(4)),
+ /* INTR_REG 2 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA1_CNP_COMPLETE, 2, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA2_CNP_COMPLETE, 2, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA3_CNP_COMPLETE, 2, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA4_CNP_COMPLETE, 2, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SOUNDWIRE, 2, BIT(4)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_VDD_DIG_RAMP_COMPLETE, 2, BIT(5)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_RCO_ERROR, 2, BIT(6)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SVA_ERROR, 2, BIT(7)),
+ /* INTR_REG 3 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_MAD_AUDIO, 3, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MAD_BEACON, 3, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MAD_ULTRASOUND, 3, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_VBAT_ATTACK, 3, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_VBAT_RESTORE, 3, BIT(4)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SVA_OUTBOX1, 3, BIT(5)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SVA_OUTBOX2, 3, BIT(6)),
+};
+
+static const struct regmap_irq_chip wcd9335_regmap_irq1_chip = {
+ .name = "wcd9335_pin1_irq",
+ .status_base = WCD9335_INTR_PIN1_STATUS0,
+ .mask_base = WCD9335_INTR_PIN1_MASK0,
+ .ack_base = WCD9335_INTR_PIN1_CLEAR0,
+ .type_base = WCD9335_INTR_LEVEL0,
+ .num_regs = 4,
+ .irqs = wcd9335_irqs,
+ .num_irqs = ARRAY_SIZE(wcd9335_irqs),
+};
+
static int wcd9335_parse_dt(struct wcd9335 *wcd)
{
struct device *dev = wcd->dev;
@@ -183,6 +231,32 @@ static int wcd9335_bring_up(struct wcd9335 *wcd)
return 0;
}
+static int wcd9335_irq_init(struct wcd9335 *wcd)
+{
+ int ret;
+
+ /*
+ * INTR1 consists of all possible interrupt sources Ear OCP,
+ * HPH OCP, MBHC, MAD, VBAT, and SVA
+ * INTR2 is a subset of first interrupt sources MAD, VBAT, and SVA
+ */
+ wcd->intr1 = of_irq_get_byname(wcd->dev->of_node, "intr1");
+ if (wcd->intr1 < 0) {
+ if (wcd->intr1 != -EPROBE_DEFER)
+ dev_err(wcd->dev, "Unable to configure IRQ\n");
+
+ return wcd->intr1;
+ }
+
+ ret = devm_regmap_add_irq_chip(wcd->dev, wcd->regmap, wcd->intr1,
+ IRQF_TRIGGER_HIGH, 0,
+ &wcd9335_regmap_irq1_chip, &wcd->irq_data);
+ if (ret)
+ dev_err(wcd->dev, "Failed to register IRQ chip: %d\n", ret);
+
+ return ret;
+}
+
static int wcd9335_slim_probe(struct slim_device *slim)
{
struct device *dev = &slim->dev;
@@ -264,6 +338,10 @@ static int wcd9335_slim_status(struct slim_device *sdev,
return ret;
}
+ ret = wcd9335_irq_init(wcd);
+ if (ret)
+ return ret;
+
ret = devm_mfd_add_devices(wcd->dev, 0, wcd9335_devices,
ARRAY_SIZE(wcd9335_devices), NULL, 0, NULL);
if (ret < 0)
diff --git a/include/linux/mfd/wcd9335/wcd9335.h b/include/linux/mfd/wcd9335/wcd9335.h
index b16d730aa1a4..82a18d08433f 100644
--- a/include/linux/mfd/wcd9335/wcd9335.h
+++ b/include/linux/mfd/wcd9335/wcd9335.h
@@ -9,6 +9,38 @@
#define WCD9335_VERSION_2_0 2
#define WCD9335_MAX_SUPPLY 5
+#define WCD9335_IRQ_SLIMBUS 0
+#define WCD9335_IRQ_FLL_LOCK_LOSS 1
+#define WCD9335_IRQ_HPH_PA_OCPL_FAULT 2
+#define WCD9335_IRQ_HPH_PA_OCPR_FAULT 3
+#define WCD9335_IRQ_EAR_PA_OCP_FAULT 4
+#define WCD9335_IRQ_HPH_PA_CNPL_COMPLETE 5
+#define WCD9335_IRQ_HPH_PA_CNPR_COMPLETE 6
+#define WCD9335_IRQ_EAR_PA_CNP_COMPLETE 7
+#define WCD9335_IRQ_MBHC_SW_DET 8
+#define WCD9335_IRQ_MBHC_ELECT_INS_REM_DET 9
+#define WCD9335_IRQ_MBHC_BUTTON_PRESS_DET 10
+#define WCD9335_IRQ_MBHC_BUTTON_RELEASE_DET 11
+#define WCD9335_IRQ_MBHC_ELECT_INS_REM_LEG_DET 12
+#define WCD9335_IRQ_RESERVED_0 13
+#define WCD9335_IRQ_RESERVED_1 14
+#define WCD9335_IRQ_RESERVED_2 15
+#define WCD9335_IRQ_LINE_PA1_CNP_COMPLETE 16
+#define WCD9335_IRQ_LINE_PA2_CNP_COMPLETE 17
+#define WCD9335_IRQ_LINE_PA3_CNP_COMPLETE 18
+#define WCD9335_IRQ_LINE_PA4_CNP_COMPLETE 19
+#define WCD9335_IRQ_SOUNDWIRE 20
+#define WCD9335_IRQ_VDD_DIG_RAMP_COMPLETE 21
+#define WCD9335_IRQ_RCO_ERROR 22
+#define WCD9335_IRQ_SVA_ERROR 23
+#define WCD9335_IRQ_MAD_AUDIO 24
+#define WCD9335_IRQ_MAD_BEACON 25
+#define WCD9335_IRQ_MAD_ULTRASOUND 26
+#define WCD9335_IRQ_VBAT_ATTACK 27
+#define WCD9335_IRQ_VBAT_RESTORE 28
+#define WCD9335_IRQ_SVA_OUTBOX1 29
+#define WCD9335_IRQ_SVA_OUTBOX2 30
+
enum wcd_interface_type {
WCD9335_INTERFACE_TYPE_SLIMBUS = 1,
WCD9335_INTERFACE_TYPE_I2C,
@@ -26,6 +58,7 @@ struct wcd9335 {
struct slim_device *slim_ifc_dev;
struct regmap *regmap;
struct regmap *ifc_dev_regmap;
+ struct regmap_irq_chip_data *irq_data;
struct regulator_bulk_data supplies[WCD9335_MAX_SUPPLY];
};
--
2.18.0
WARNING: multiple messages have this Message-ID (diff)
From: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
To: lee.jones@linaro.org, robh+dt@kernel.org, broonie@kernel.org
Cc: mark.rutland@arm.com, devicetree@vger.kernel.org,
alsa-devel@alsa-project.org, bgoswami@codeaurora.org,
lgirdwood@gmail.com, linux-kernel@vger.kernel.org,
vkoul@kernel.org,
Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Subject: [PATCH v3 03/13] mfd: wcd9335: add wcd irq support
Date: Tue, 4 Sep 2018 11:24:50 +0100 [thread overview]
Message-ID: <20180904102500.30318-4-srinivas.kandagatla@linaro.org> (raw)
In-Reply-To: <20180904102500.30318-1-srinivas.kandagatla@linaro.org>
WCD9335 supports two lines of irqs INTR1 and INTR2. Multiple interrupts
are muxed via these lines. INTR1 consists of all possible interrupt
sources like: Ear OCP, HPH OCP, MBHC, MAD, VBAT, and SVA. INTR2 is a
subset of first interrupt sources like MAD, VBAT, and SVA
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Reviewed-by: Vinod Koul <vkoul@kernel.org>
---
drivers/mfd/wcd9335-core.c | 78 +++++++++++++++++++++++++++++
include/linux/mfd/wcd9335/wcd9335.h | 33 ++++++++++++
2 files changed, 111 insertions(+)
diff --git a/drivers/mfd/wcd9335-core.c b/drivers/mfd/wcd9335-core.c
index dbfae50c28b2..e2fc438c1a34 100644
--- a/drivers/mfd/wcd9335-core.c
+++ b/drivers/mfd/wcd9335-core.c
@@ -3,6 +3,7 @@
#include <linux/clk.h>
#include <linux/gpio.h>
+#include <linux/interrupt.h>
#include <linux/kernel.h>
#include <linux/mfd/core.h>
#include <linux/mfd/wcd9335/registers.h>
@@ -10,6 +11,7 @@
#include <linux/module.h>
#include <linux/of_gpio.h>
#include <linux/of.h>
+#include <linux/of_irq.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>
#include <linux/regulator/consumer.h>
@@ -84,6 +86,52 @@ static struct regmap_config wcd9335_ifc_regmap_config = {
.num_ranges = ARRAY_SIZE(wcd9335_ifc_ranges),
};
+static const struct regmap_irq wcd9335_irqs[] = {
+ /* INTR_REG 0 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_SLIMBUS, 0, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_FLL_LOCK_LOSS, 0, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_OCPL_FAULT, 0, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_OCPR_FAULT, 0, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_EAR_PA_OCP_FAULT, 0, BIT(4)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_CNPL_COMPLETE, 0, BIT(5)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_HPH_PA_CNPR_COMPLETE, 0, BIT(6)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_EAR_PA_CNP_COMPLETE, 0, BIT(7)),
+ /* INTR_REG 1 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_SW_DET, 1, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_ELECT_INS_REM_DET, 1, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_BUTTON_PRESS_DET, 1, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_BUTTON_RELEASE_DET, 1, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MBHC_ELECT_INS_REM_LEG_DET, 1, BIT(4)),
+ /* INTR_REG 2 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA1_CNP_COMPLETE, 2, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA2_CNP_COMPLETE, 2, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA3_CNP_COMPLETE, 2, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_LINE_PA4_CNP_COMPLETE, 2, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SOUNDWIRE, 2, BIT(4)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_VDD_DIG_RAMP_COMPLETE, 2, BIT(5)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_RCO_ERROR, 2, BIT(6)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SVA_ERROR, 2, BIT(7)),
+ /* INTR_REG 3 */
+ REGMAP_IRQ_REG(WCD9335_IRQ_MAD_AUDIO, 3, BIT(0)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MAD_BEACON, 3, BIT(1)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_MAD_ULTRASOUND, 3, BIT(2)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_VBAT_ATTACK, 3, BIT(3)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_VBAT_RESTORE, 3, BIT(4)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SVA_OUTBOX1, 3, BIT(5)),
+ REGMAP_IRQ_REG(WCD9335_IRQ_SVA_OUTBOX2, 3, BIT(6)),
+};
+
+static const struct regmap_irq_chip wcd9335_regmap_irq1_chip = {
+ .name = "wcd9335_pin1_irq",
+ .status_base = WCD9335_INTR_PIN1_STATUS0,
+ .mask_base = WCD9335_INTR_PIN1_MASK0,
+ .ack_base = WCD9335_INTR_PIN1_CLEAR0,
+ .type_base = WCD9335_INTR_LEVEL0,
+ .num_regs = 4,
+ .irqs = wcd9335_irqs,
+ .num_irqs = ARRAY_SIZE(wcd9335_irqs),
+};
+
static int wcd9335_parse_dt(struct wcd9335 *wcd)
{
struct device *dev = wcd->dev;
@@ -183,6 +231,32 @@ static int wcd9335_bring_up(struct wcd9335 *wcd)
return 0;
}
+static int wcd9335_irq_init(struct wcd9335 *wcd)
+{
+ int ret;
+
+ /*
+ * INTR1 consists of all possible interrupt sources Ear OCP,
+ * HPH OCP, MBHC, MAD, VBAT, and SVA
+ * INTR2 is a subset of first interrupt sources MAD, VBAT, and SVA
+ */
+ wcd->intr1 = of_irq_get_byname(wcd->dev->of_node, "intr1");
+ if (wcd->intr1 < 0) {
+ if (wcd->intr1 != -EPROBE_DEFER)
+ dev_err(wcd->dev, "Unable to configure IRQ\n");
+
+ return wcd->intr1;
+ }
+
+ ret = devm_regmap_add_irq_chip(wcd->dev, wcd->regmap, wcd->intr1,
+ IRQF_TRIGGER_HIGH, 0,
+ &wcd9335_regmap_irq1_chip, &wcd->irq_data);
+ if (ret)
+ dev_err(wcd->dev, "Failed to register IRQ chip: %d\n", ret);
+
+ return ret;
+}
+
static int wcd9335_slim_probe(struct slim_device *slim)
{
struct device *dev = &slim->dev;
@@ -264,6 +338,10 @@ static int wcd9335_slim_status(struct slim_device *sdev,
return ret;
}
+ ret = wcd9335_irq_init(wcd);
+ if (ret)
+ return ret;
+
ret = devm_mfd_add_devices(wcd->dev, 0, wcd9335_devices,
ARRAY_SIZE(wcd9335_devices), NULL, 0, NULL);
if (ret < 0)
diff --git a/include/linux/mfd/wcd9335/wcd9335.h b/include/linux/mfd/wcd9335/wcd9335.h
index b16d730aa1a4..82a18d08433f 100644
--- a/include/linux/mfd/wcd9335/wcd9335.h
+++ b/include/linux/mfd/wcd9335/wcd9335.h
@@ -9,6 +9,38 @@
#define WCD9335_VERSION_2_0 2
#define WCD9335_MAX_SUPPLY 5
+#define WCD9335_IRQ_SLIMBUS 0
+#define WCD9335_IRQ_FLL_LOCK_LOSS 1
+#define WCD9335_IRQ_HPH_PA_OCPL_FAULT 2
+#define WCD9335_IRQ_HPH_PA_OCPR_FAULT 3
+#define WCD9335_IRQ_EAR_PA_OCP_FAULT 4
+#define WCD9335_IRQ_HPH_PA_CNPL_COMPLETE 5
+#define WCD9335_IRQ_HPH_PA_CNPR_COMPLETE 6
+#define WCD9335_IRQ_EAR_PA_CNP_COMPLETE 7
+#define WCD9335_IRQ_MBHC_SW_DET 8
+#define WCD9335_IRQ_MBHC_ELECT_INS_REM_DET 9
+#define WCD9335_IRQ_MBHC_BUTTON_PRESS_DET 10
+#define WCD9335_IRQ_MBHC_BUTTON_RELEASE_DET 11
+#define WCD9335_IRQ_MBHC_ELECT_INS_REM_LEG_DET 12
+#define WCD9335_IRQ_RESERVED_0 13
+#define WCD9335_IRQ_RESERVED_1 14
+#define WCD9335_IRQ_RESERVED_2 15
+#define WCD9335_IRQ_LINE_PA1_CNP_COMPLETE 16
+#define WCD9335_IRQ_LINE_PA2_CNP_COMPLETE 17
+#define WCD9335_IRQ_LINE_PA3_CNP_COMPLETE 18
+#define WCD9335_IRQ_LINE_PA4_CNP_COMPLETE 19
+#define WCD9335_IRQ_SOUNDWIRE 20
+#define WCD9335_IRQ_VDD_DIG_RAMP_COMPLETE 21
+#define WCD9335_IRQ_RCO_ERROR 22
+#define WCD9335_IRQ_SVA_ERROR 23
+#define WCD9335_IRQ_MAD_AUDIO 24
+#define WCD9335_IRQ_MAD_BEACON 25
+#define WCD9335_IRQ_MAD_ULTRASOUND 26
+#define WCD9335_IRQ_VBAT_ATTACK 27
+#define WCD9335_IRQ_VBAT_RESTORE 28
+#define WCD9335_IRQ_SVA_OUTBOX1 29
+#define WCD9335_IRQ_SVA_OUTBOX2 30
+
enum wcd_interface_type {
WCD9335_INTERFACE_TYPE_SLIMBUS = 1,
WCD9335_INTERFACE_TYPE_I2C,
@@ -26,6 +58,7 @@ struct wcd9335 {
struct slim_device *slim_ifc_dev;
struct regmap *regmap;
struct regmap *ifc_dev_regmap;
+ struct regmap_irq_chip_data *irq_data;
struct regulator_bulk_data supplies[WCD9335_MAX_SUPPLY];
};
--
2.18.0
next prev parent reply other threads:[~2018-09-04 10:28 UTC|newest]
Thread overview: 35+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-09-04 10:24 [PATCH v3 00/13] ASoC: Add support to WCD9335 Audio Codec Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 01/13] ASoC: dt-bindings: update wcd9335 bindings Srinivas Kandagatla
2018-09-04 10:24 ` Srinivas Kandagatla
2018-09-10 20:02 ` Rob Herring
2018-09-10 20:02 ` Rob Herring
2018-09-04 10:24 ` [PATCH v3 02/13] mfd: wcd9335: add support to wcd9335 core Srinivas Kandagatla
2018-09-11 15:33 ` Lee Jones
2018-09-12 7:23 ` Srinivas Kandagatla
2018-09-12 8:58 ` Lee Jones
2018-09-12 9:32 ` Srinivas Kandagatla
2018-09-12 10:59 ` Lee Jones
2018-09-12 11:11 ` Srinivas Kandagatla
2018-09-12 11:46 ` Lee Jones
2018-09-12 12:43 ` Srinivas Kandagatla
2018-09-17 1:08 ` Lee Jones
2018-09-04 10:24 ` Srinivas Kandagatla [this message]
2018-09-04 10:24 ` [PATCH v3 03/13] mfd: wcd9335: add wcd irq support Srinivas Kandagatla
2018-09-11 15:35 ` Lee Jones
2018-09-11 15:35 ` Lee Jones
2018-09-04 10:24 ` [PATCH v3 04/13] ASoC: wcd9335: add support to wcd9335 codec Srinivas Kandagatla
2018-09-04 10:24 ` Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 05/13] ASoC: wcd9335: add CLASS-H Controller support Srinivas Kandagatla
2018-09-04 10:24 ` Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 06/13] ASoC: wcd9335: add basic controls Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 07/13] ASoC: wcd9335: add playback dapm widgets Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 08/13] ASoC: wcd9335: add capture " Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 09/13] ASoC: wcd9335: add audio routings Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 10/13] ASoC: dt-bindings: Add WCD9335 MBHC specific properties Srinivas Kandagatla
2018-09-10 20:06 ` Rob Herring
2018-09-12 7:44 ` Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 11/13] ASoC: wcd9335: add mbhc support Srinivas Kandagatla
2018-09-04 10:24 ` [PATCH v3 12/13] ASoC: apq8096: add slim support Srinivas Kandagatla
2018-09-10 8:24 ` kbuild test robot
2018-09-10 8:24 ` kbuild test robot
2018-09-04 10:25 ` [PATCH v3 13/13] ASoC: apq8096: add headset JACK support Srinivas Kandagatla
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20180904102500.30318-4-srinivas.kandagatla@linaro.org \
--to=srinivas.kandagatla@linaro.org \
--cc=alsa-devel@alsa-project.org \
--cc=bgoswami@codeaurora.org \
--cc=broonie@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=lee.jones@linaro.org \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mark.rutland@arm.com \
--cc=robh+dt@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.