All of lore.kernel.org
 help / color / mirror / Atom feed
From: Laura Abbott <labbott@redhat.com>
To: "Nicholas A. Bellinger" <nab@linux-iscsi.org>,
	Bart Van Assche <bart.vanassche@wdc.com>,
	Hannes Reinecke <hare@suse.com>,
	Mike Christie <mchristi@redhat.com>,
	Maurizio Lombardi <mlombard@redhat.com>
Cc: Laura Abbott <labbott@redhat.com>,
	target-devel@vger.kernel.org, linux-kernel@vger.kernel.org,
	Kees Cook <keescook@chromium.org>,
	"Martin K . Petersen" <martin.petersen@oracle.com>
Subject: [PATCHv3] iscsi-target: Don't use stack buffer for scatterlist
Date: Tue,  4 Sep 2018 11:47:40 -0700	[thread overview]
Message-ID: <20180904184740.11102-1-labbott@redhat.com> (raw)

Fedora got a bug report of a crash with iSCSI:

kernel BUG at include/linux/scatterlist.h:143!
...
RIP: 0010:iscsit_do_crypto_hash_buf+0x154/0x180 [iscsi_target_mod]
...
 Call Trace:
  ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
  iscsit_get_rx_pdu+0x4cd/0xa90 [iscsi_target_mod]
  ? native_sched_clock+0x3e/0xa0
  ? iscsi_target_tx_thread+0x200/0x200 [iscsi_target_mod]
  iscsi_target_rx_thread+0x81/0xf0 [iscsi_target_mod]
  kthread+0x120/0x140
  ? kthread_create_worker_on_cpu+0x70/0x70
  ret_from_fork+0x3a/0x50

This is a BUG_ON for using a stack buffer with a scatterlist.
There are two cases that trigger this bug. Switch to using a
dynamically allocated buffer for one case and do not assign
a NULL buffer in another case.

Signed-off-by: Laura Abbott <labbott@redhat.com>
---
v3: Switched to kcalloc to drop an extra memset call. I was asked
offline about kmalloc vs. kmalloc_array and ended up asking about this
at the security summit since I was there last week. The preferred style
is kmalloc_array for all arrays, even those of one byte characters.
I will also switch it if people feel really strongly about this or I've
misunderstood the array guidelines.
---
 drivers/target/iscsi/iscsi_target.c | 22 ++++++++++++++--------
 1 file changed, 14 insertions(+), 8 deletions(-)

diff --git a/drivers/target/iscsi/iscsi_target.c b/drivers/target/iscsi/iscsi_target.c
index 94bad43c41ff..2a586b58a011 100644
--- a/drivers/target/iscsi/iscsi_target.c
+++ b/drivers/target/iscsi/iscsi_target.c
@@ -1416,7 +1416,8 @@ static void iscsit_do_crypto_hash_buf(struct ahash_request *hash,
 
 	sg_init_table(sg, ARRAY_SIZE(sg));
 	sg_set_buf(sg, buf, payload_length);
-	sg_set_buf(sg + 1, pad_bytes, padding);
+	if (padding)
+		sg_set_buf(sg + 1, pad_bytes, padding);
 
 	ahash_request_set_crypt(hash, sg, data_crc, payload_length + padding);
 
@@ -3910,10 +3911,14 @@ static bool iscsi_target_check_conn_state(struct iscsi_conn *conn)
 static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 {
 	int ret;
-	u8 buffer[ISCSI_HDR_LEN], opcode;
+	u8 *buffer, opcode;
 	u32 checksum = 0, digest = 0;
 	struct kvec iov;
 
+	buffer = kcalloc(ISCSI_HDR_LEN, sizeof(*buffer), GFP_KERNEL);
+	if (!buffer)
+		return;
+
 	while (!kthread_should_stop()) {
 		/*
 		 * Ensure that both TX and RX per connection kthreads
@@ -3921,7 +3926,6 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 		 */
 		iscsit_thread_check_cpumask(conn, current, 0);
 
-		memset(buffer, 0, ISCSI_HDR_LEN);
 		memset(&iov, 0, sizeof(struct kvec));
 
 		iov.iov_base	= buffer;
@@ -3930,7 +3934,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 		ret = rx_data(conn, &iov, 1, ISCSI_HDR_LEN);
 		if (ret != ISCSI_HDR_LEN) {
 			iscsit_rx_thread_wait_for_tcp(conn);
-			return;
+			break;
 		}
 
 		if (conn->conn_ops->HeaderDigest) {
@@ -3940,7 +3944,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 			ret = rx_data(conn, &iov, 1, ISCSI_CRC_LEN);
 			if (ret != ISCSI_CRC_LEN) {
 				iscsit_rx_thread_wait_for_tcp(conn);
-				return;
+				break;
 			}
 
 			iscsit_do_crypto_hash_buf(conn->conn_rx_hash, buffer,
@@ -3964,7 +3968,7 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 		}
 
 		if (conn->conn_state == TARG_CONN_STATE_IN_LOGOUT)
-			return;
+			break;
 
 		opcode = buffer[0] & ISCSI_OPCODE_MASK;
 
@@ -3975,13 +3979,15 @@ static void iscsit_get_rx_pdu(struct iscsi_conn *conn)
 			" while in Discovery Session, rejecting.\n", opcode);
 			iscsit_add_reject(conn, ISCSI_REASON_PROTOCOL_ERROR,
 					  buffer);
-			return;
+			break;
 		}
 
 		ret = iscsi_target_rx_opcode(conn, buffer);
 		if (ret < 0)
-			return;
+			break;
 	}
+
+	kfree(buffer);
 }
 
 int iscsi_target_rx_thread(void *arg)
-- 
2.17.1


             reply	other threads:[~2018-09-04 18:47 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2018-09-04 18:47 Laura Abbott [this message]
2018-09-04 19:03 ` [PATCHv3] iscsi-target: Don't use stack buffer for scatterlist Mike Christie
2018-09-12  0:46 ` Martin K. Petersen
2018-09-12  0:48   ` Martin K. Petersen

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180904184740.11102-1-labbott@redhat.com \
    --to=labbott@redhat.com \
    --cc=bart.vanassche@wdc.com \
    --cc=hare@suse.com \
    --cc=keescook@chromium.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=martin.petersen@oracle.com \
    --cc=mchristi@redhat.com \
    --cc=mlombard@redhat.com \
    --cc=nab@linux-iscsi.org \
    --cc=target-devel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.