From: Gerd Hoffmann <kraxel@redhat.com> To: dri-devel@lists.freedesktop.org Cc: Gerd Hoffmann <kraxel@redhat.com>, David Airlie <airlied@linux.ie>, virtualization@lists.linux-foundation.org (open list:DRM DRIVER FOR BOCHS VIRTUAL GPU), linux-kernel@vger.kernel.org (open list) Subject: [PATCH v2 2/2] drm/bochs: add edid support. Date: Tue, 2 Oct 2018 08:19:05 +0200 [thread overview] Message-ID: <20181002061905.10496-3-kraxel@redhat.com> (raw) In-Reply-To: <20181002061905.10496-1-kraxel@redhat.com> Recent qemu (latest master branch, upcoming 3.1 release) got support for EDID data. This patch adds guest driver support. EDID support in qemu is not (yet) enabled by default, so please use 'qemu -device VGA,edid=on' for testing. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- drivers/gpu/drm/bochs/bochs.h | 1 + drivers/gpu/drm/bochs/bochs_hw.c | 38 ++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/bochs/bochs_kms.c | 18 +++++++++++++++--- 3 files changed, 54 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/bochs/bochs.h b/drivers/gpu/drm/bochs/bochs.h index 375bf92cd0..055d7b437a 100644 --- a/drivers/gpu/drm/bochs/bochs.h +++ b/drivers/gpu/drm/bochs/bochs.h @@ -70,6 +70,7 @@ struct bochs_device { u16 yres_virtual; u32 stride; u32 bpp; + struct edid *edid; /* drm */ struct drm_device *dev; diff --git a/drivers/gpu/drm/bochs/bochs_hw.c b/drivers/gpu/drm/bochs/bochs_hw.c index a39b0343c1..21a769e48c 100644 --- a/drivers/gpu/drm/bochs/bochs_hw.c +++ b/drivers/gpu/drm/bochs/bochs_hw.c @@ -47,6 +47,41 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val) } } +static int bochs_load_edid(struct bochs_device *bochs) +{ + uint8_t *blob; + size_t i, len; + uint8_t num_exts; + + if (!bochs->mmio) + return -1; + + if ((readb(bochs->mmio+0) != 0x00 || + readb(bochs->mmio+1) != 0xff)) + return -1; + + num_exts = readb(bochs->mmio + 126); + len = EDID_LENGTH * (1 + num_exts); + if (len > 0x400 /* vga register offset */) + return -1; + + kfree(bochs->edid); + bochs->edid = kmalloc(len, GFP_KERNEL); + blob = (void *)bochs->edid; + for (i = 0; i < len; i++) { + blob[i] = readb(bochs->mmio+i); + } + + if (!drm_edid_is_valid(bochs->edid)) { + DRM_ERROR("EDID is not valid, ignoring.\n"); + kfree(bochs->edid); + bochs->edid = NULL; + return -1; + } + + return 0; +} + int bochs_hw_init(struct drm_device *dev, uint32_t flags) { struct bochs_device *bochs = dev->dev_private; @@ -133,6 +168,9 @@ int bochs_hw_init(struct drm_device *dev, uint32_t flags) } noext: + if (bochs_load_edid(bochs) == 0) + DRM_INFO("Found EDID data blob.\n"); + return 0; } diff --git a/drivers/gpu/drm/bochs/bochs_kms.c b/drivers/gpu/drm/bochs/bochs_kms.c index ca5a9afdd5..5b3afe9364 100644 --- a/drivers/gpu/drm/bochs/bochs_kms.c +++ b/drivers/gpu/drm/bochs/bochs_kms.c @@ -181,10 +181,17 @@ static void bochs_encoder_init(struct drm_device *dev) static int bochs_connector_get_modes(struct drm_connector *connector) { - int count; + struct bochs_device *bochs = + container_of(connector, struct bochs_device, connector); + int count = 0; - count = drm_add_modes_noedid(connector, 8192, 8192); - drm_set_preferred_mode(connector, defx, defy); + if (bochs->edid) + count = drm_add_edid_modes(connector, bochs->edid); + + if (!count) { + count = drm_add_modes_noedid(connector, 8192, 8192); + drm_set_preferred_mode(connector, defx, defy); + } return count; } @@ -239,6 +246,11 @@ static void bochs_connector_init(struct drm_device *dev) drm_connector_helper_add(connector, &bochs_connector_connector_helper_funcs); drm_connector_register(connector); + + if (bochs->edid) { + drm_connector_attach_edid_property(connector); + drm_connector_update_edid_property(connector, bochs->edid); + } } -- 2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Gerd Hoffmann <kraxel@redhat.com> To: dri-devel@lists.freedesktop.org Cc: David Airlie <airlied@linux.ie>, open list <linux-kernel@vger.kernel.org>, "open list:DRM DRIVER FOR BOCHS VIRTUAL GPU" <virtualization@lists.linux-foundation.org> Subject: [PATCH v2 2/2] drm/bochs: add edid support. Date: Tue, 2 Oct 2018 08:19:05 +0200 [thread overview] Message-ID: <20181002061905.10496-3-kraxel@redhat.com> (raw) In-Reply-To: <20181002061905.10496-1-kraxel@redhat.com> Recent qemu (latest master branch, upcoming 3.1 release) got support for EDID data. This patch adds guest driver support. EDID support in qemu is not (yet) enabled by default, so please use 'qemu -device VGA,edid=on' for testing. Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> --- drivers/gpu/drm/bochs/bochs.h | 1 + drivers/gpu/drm/bochs/bochs_hw.c | 38 ++++++++++++++++++++++++++++++++++++++ drivers/gpu/drm/bochs/bochs_kms.c | 18 +++++++++++++++--- 3 files changed, 54 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/bochs/bochs.h b/drivers/gpu/drm/bochs/bochs.h index 375bf92cd0..055d7b437a 100644 --- a/drivers/gpu/drm/bochs/bochs.h +++ b/drivers/gpu/drm/bochs/bochs.h @@ -70,6 +70,7 @@ struct bochs_device { u16 yres_virtual; u32 stride; u32 bpp; + struct edid *edid; /* drm */ struct drm_device *dev; diff --git a/drivers/gpu/drm/bochs/bochs_hw.c b/drivers/gpu/drm/bochs/bochs_hw.c index a39b0343c1..21a769e48c 100644 --- a/drivers/gpu/drm/bochs/bochs_hw.c +++ b/drivers/gpu/drm/bochs/bochs_hw.c @@ -47,6 +47,41 @@ static void bochs_dispi_write(struct bochs_device *bochs, u16 reg, u16 val) } } +static int bochs_load_edid(struct bochs_device *bochs) +{ + uint8_t *blob; + size_t i, len; + uint8_t num_exts; + + if (!bochs->mmio) + return -1; + + if ((readb(bochs->mmio+0) != 0x00 || + readb(bochs->mmio+1) != 0xff)) + return -1; + + num_exts = readb(bochs->mmio + 126); + len = EDID_LENGTH * (1 + num_exts); + if (len > 0x400 /* vga register offset */) + return -1; + + kfree(bochs->edid); + bochs->edid = kmalloc(len, GFP_KERNEL); + blob = (void *)bochs->edid; + for (i = 0; i < len; i++) { + blob[i] = readb(bochs->mmio+i); + } + + if (!drm_edid_is_valid(bochs->edid)) { + DRM_ERROR("EDID is not valid, ignoring.\n"); + kfree(bochs->edid); + bochs->edid = NULL; + return -1; + } + + return 0; +} + int bochs_hw_init(struct drm_device *dev, uint32_t flags) { struct bochs_device *bochs = dev->dev_private; @@ -133,6 +168,9 @@ int bochs_hw_init(struct drm_device *dev, uint32_t flags) } noext: + if (bochs_load_edid(bochs) == 0) + DRM_INFO("Found EDID data blob.\n"); + return 0; } diff --git a/drivers/gpu/drm/bochs/bochs_kms.c b/drivers/gpu/drm/bochs/bochs_kms.c index ca5a9afdd5..5b3afe9364 100644 --- a/drivers/gpu/drm/bochs/bochs_kms.c +++ b/drivers/gpu/drm/bochs/bochs_kms.c @@ -181,10 +181,17 @@ static void bochs_encoder_init(struct drm_device *dev) static int bochs_connector_get_modes(struct drm_connector *connector) { - int count; + struct bochs_device *bochs = + container_of(connector, struct bochs_device, connector); + int count = 0; - count = drm_add_modes_noedid(connector, 8192, 8192); - drm_set_preferred_mode(connector, defx, defy); + if (bochs->edid) + count = drm_add_edid_modes(connector, bochs->edid); + + if (!count) { + count = drm_add_modes_noedid(connector, 8192, 8192); + drm_set_preferred_mode(connector, defx, defy); + } return count; } @@ -239,6 +246,11 @@ static void bochs_connector_init(struct drm_device *dev) drm_connector_helper_add(connector, &bochs_connector_connector_helper_funcs); drm_connector_register(connector); + + if (bochs->edid) { + drm_connector_attach_edid_property(connector); + drm_connector_update_edid_property(connector, bochs->edid); + } } -- 2.9.3
next prev parent reply other threads:[~2018-10-02 6:19 UTC|newest] Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top 2018-10-02 6:19 [PATCH v2 0/2] drm/bochs: add edid support Gerd Hoffmann 2018-10-02 6:19 ` [PATCH v2 1/2] drm: add drm_connector_attach_edid_property() Gerd Hoffmann 2018-10-02 6:19 ` Gerd Hoffmann 2018-10-02 8:45 ` Daniel Vetter 2018-10-02 6:19 ` Gerd Hoffmann [this message] 2018-10-02 6:19 ` [PATCH v2 2/2] drm/bochs: add edid support Gerd Hoffmann
Reply instructions: You may reply publicly to this message via plain-text email using any one of the following methods: * Save the following mbox file, import it into your mail client, and reply-to-all from there: mbox Avoid top-posting and favor interleaved quoting: https://en.wikipedia.org/wiki/Posting_style#Interleaved_style * Reply using the --to, --cc, and --in-reply-to switches of git-send-email(1): git send-email \ --in-reply-to=20181002061905.10496-3-kraxel@redhat.com \ --to=kraxel@redhat.com \ --cc=airlied@linux.ie \ --cc=dri-devel@lists.freedesktop.org \ --cc=linux-kernel@vger.kernel.org \ --cc=virtualization@lists.linux-foundation.org \ /path/to/YOUR_REPLY https://kernel.org/pub/software/scm/git/docs/git-send-email.html * If your mail client supports setting the In-Reply-To header via mailto: links, try the mailto: linkBe sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.